Precise ELA Telescoping Mod by Super-T!

Status
Not open for further replies.

eratikmind

Vaping Master
ECF Veteran
Verified Member
Mar 22, 2013
5,481
4,712
Las Vegas/San Francisco
With regard to my preorder, I tell myself the following . . .

If it were a piece of poorly executed garbage, I would not have bothered ordering it.

Have to admire the basis of design and the stellar execution of build.

Wish that the scum bags ahead of me would simply drop dead.

Most importantly . . . Stop looking at the posted pics!!!!!!!!!!


- Andy . . . Don't let the Ciggieman getcha . . . vape'em.
 

jamesd1628

Super Member
ECF Veteran
Verified Member
Jan 23, 2010
701
815
Chattanooga/Ringgold
It's the one that holds on the accent ring. It doesn't need to be there, I just didn't want to lose it.

Was just curious if that affected the connection in 18350 mode and that O ring being there.

No, without the oring there would be a slight gap. I'm using an efest 18350, which is longer than the AW version. I also have a slightly thicker oring in the bottom than what David includes in the stock setup. It gives the switch a slightly longer throw, which I prefer. With David's stock setup and using an AW 18350, there is no gap (and it won't fire standing up).
 

Nach

Ultra Member
ECF Veteran
Verified Member
Jul 14, 2012
2,407
4,676
48
Chicagoland, USA
jazco.net
Ahh different brand battery, that explains it all. Thank you sir.

No, without the oring there would be a slight gap. I'm using an efest 18350, which is longer than the AW version. I also have a slightly thicker oring in the bottom than what David includes in the stock setup. It gives the switch a slightly longer throw, which I prefer. With David's stock setup and using an AW 18350, there is no gap (and it won't fire standing up).
 

forcedfuel50

Unregistered Supplier
ECF Veteran
We are down to about 20 of these left on the second batch preorder, so don't miss out!

brass2.jpg
 
Status
Not open for further replies.

Users who are viewing this thread