Precise ELA Telescoping Mod by Super-T!

[yuujin]

i ordered mine on the 25th of February and i still haven't received my notice yet. i hope this give you an idea of the status haha

cool thanks.

 

[Bekinder]

I ordered mine on Jan. 10th and got my email today. Must have literally hundred ordered before mine. Be too happy to get this.
My first Super T item.

 

[Dizz]

I ordered mine on Jan. 10th and got my email today. Must have literally hundred ordered before mine. Be too happy to get this.
My first Super T item.

Hmmm, Jan. 18th here. I guess another week or two for me. I was hoping to get it before my Vegas trip, survey says? Not likely.

 

[forcedfuel50]

Update: We are working on through order 14646 today. I'm still going to stick with my estimate as of last week as i think we may gain some ground later this week and early next week so my goal is through 15052 this week and the remainder of first batch (through 15288) the following week.

 

[Riverboat]

I'm still going to stick with my estimate as of last week as i think we may gain some ground later this week and early next week so my goal is through 15052 this week.

Order# 149xx is happy

 

[Blix]

Order# 149xx is happy

My order# 149xx too!

 

[vaptamist]

Awesome news for second batchers, too!

 

[alexvander123]

Ordered Jan 30th so I'm coming up! So excited I have a Trident dripper on its way for the ELA!

Sent from my Galaxy Nexus using Tapatalk 2

 

[eratikmind]

Update: We are working on through order 14646 today. I'm still going to stick with my estimate as of last week as i think we may gain some ground later this week and early next week so my goal is through 15052 this week and the remainder of first batch (through 15288) the following week.

Thanks for the update and your folks continued efforts, David.

- Andy

 

[Mindtroverted]

Ordered Jan 30th so I'm coming up! So excited I have a Trident dripper on its way for the ELA!

If it's not a problem I would highly appreciate it if you'd post pictures and send me your impressions of the Trident via PM. That's exactly the atty I want to use on my ELA in 18350 mode, but I'm worried that the vapor is going to be too hot. I don't like very hot vapor, but I also want a shorter atty. Trident's lines seem like they'd complement the ELA perfectly

 

[rojo]

If it's not a problem I would highly appreciate it if you'd post pictures and send me your impressions of the Trident via PM. That's exactly the atty I want to use on my ELA in 18350 mode, but I'm worried that the vapor is going to be too hot. I don't like very hot vapor, but I also want a shorter atty. Trident's lines seem like they'd complement the ELA perfectly

Via PM? What treachery is this? If any ELA pics are to be posted then I demand the opportunity to enjoy them as well. I denounce this thrice-blasted plan of yours Mindtroverted.

Sent from my SCH-I405 using Tapatalk 2

 

[Tintreach]

If it's not a problem I would highly appreciate it if you'd post pictures and send me your impressions of the Trident via PM. That's exactly the atty I want to use on my ELA in 18350 mode, but I'm worried that the vapor is going to be too hot. I don't like very hot vapor, but I also want a shorter atty. Trident's lines seem like they'd complement the ELA perfectly

Well if the current throughput on the ELA is optimal and you want a cool vape with lots if electrons I'd say math wise a 2 ohm coil with 28g or even maybe as thick as 26g kanthal. That should tone down the temp some. A long drip tip will help too.

 

[Mindtroverted]

Via PM? What treachery is this? If any ELA pics are to be posted then I demand the opportunity to enjoy them as well. I denounce this thrice-blasted plan of yours Mindtroverted.

Let me rephrase that. I would highly appreciate it if you'd post pictures on the thread and send me your impressions of the Trident via PM. I denounce your denouncing. Thrice.

 

[Blix]

If it's not a problem I would highly appreciate it if you'd post pictures and send me your impressions of the Trident via PM. That's exactly the atty I want to use on my ELA in 18350 mode, but I'm worried that the vapor is going to be too hot. I don't like very hot vapor, but I also want a shorter atty. Trident's lines seem like they'd complement the ELA perfectly

I have a Trident. Advertised as 22mm, but it's 21. Build quality of the base is on par with a $15 iGo-L, but it vapes just excellent. Not overly hot even with a 0.5ohm dual-coil setup.

 

[Mindtroverted]

I have a Trident. Advertised as 22mm, but it's 21. Build quality of the base is on par with a $15 iGo-L, but it vapes just excellent. Not overly hot even with a 0.5ohm dual-coil setup.

What do the posts look like? Specifically, where does the wire go and how do you tighten it? Also, how tight are the o-rings? What is its length? How many drops can you fit in there? Does the variable airflow work well? Does it leak? And finally, how would it look like on an ELA?

 

[Nach]

WOW! I can only imagine how many wraps of 28 (or 26ga) you would need to make a 2 ohm coil. I think there would be more wire than wick!

Well if the current throughput on the ELA is optimal and you want a cool vape with lots if electrons I'd say math wise a 2 ohm coil with 28g or even maybe as thick as 26g kanthal. That should tone down the temp some. A long drip tip will help too.

 

[Tintreach]

It's a trident!!! Lots of coil room in there. 2 ohms @ 28g = about 3" I think without checking on a VOM. Should be around 5 wraps on a 5mm chunk of wick

 

[Blix]

What do the posts look like? Specifically, where does the wire go and how do you tighten it? Also, how tight are the o-rings? What is its length? How many drops can you fit in there? Does the variable airflow work well? Does it leak? And finally, how would it look like on an ELA?

The posts have a slot in them and the "screw-cap" pins them down.
Very tight o-rings, no leaking at all. The various airholes works excellent. I use it in monster-mode with dual 2mm holes, quite fun.

As for how it would look on the ELA, you'll have to wait until I have my ELA here.


EDIT: height of it is about 22mm.

 

[The Yeti]

I really want to order an ELA, but whenever I hit SUBMIT, I'm getting this message:

>>>>>>>>>>>>>>>>>>

Zip Code has changed. Shipping rates need to be recalculated. Please press Return to Cart.Please specify a valid value for the
Shipping Address 1
City
State/Province
Zip Code
Phone Number
First
Last

>>>>>>>>>>>>>>>>>>

I've triple checked my info and hit submit 3 times with no luck. Any ideas??



EDIT: OK, 4th time was the charm...ELA ordered (polished, with both sets of accent rings)! Now, the wait begins..........

 

[The Yeti]

Now that I've got my ELA ordered, what's the best looking atty to put on top of this beauty? Pics to prove it!