ProChat - All Things ProVape and Beyond

[WillyZee]

vape Mail

Sent via iPhone

 

[raitizz]

R

 

[Vicshalls]

Man getting back to work has meant I have been falling down in here. Just wanted yall to know that every bit of advice yall gave me on the Russian has worked. It has been working like a charm. Well for the most part. When I do a refill or first fill I guess I put too much in cause I do have to open the top cap to have it wick after a few pulls then it is fine. Second the stinking pin is always moving and end up with op mess with the screw and I am good to go again for a bit. Bad part I bought a new screw and before I had a chance to mess with it my wife threw it away. Ugh. Oh well. So hope all is well. Be back soonish.

Sent from my XT1097 using Tapatalk

 

[Woofer]

the stinking pin

Fill to about 80% or so.
The stinking pin, sorry I don't have a stinking pin. Do you mean the adjustable 510 + screw?

 

[Vicshalls]

Fill to about 80% or so.
The stinking pin, sorry I don't have a stinking pin. Do you mean the adjustable 510 + screw?

Yes lol I think the inner screw is fine it is the it's the 510 one.

Sent from my XT1097 using Tapatalk

 

[Woofer]

Yes lol I think the inner screw is fine it is the it's the 510 one.

OK, what you can do is determine what the distance between the adjustable 510 screw and the inner air tube screw is.
Cut a spacer/washer that size and place it between them, tighten the 510 screw while holding the positive block in the atty. Voila fixed.

I made my spacers from a brass pen refill tube, I expect a plastic refill tube would also work.

 

[raitizz]

Thanks, Knicks.

R

 

[darkangel07760]

Did the GMZ mini win?

yes it did, because it was such a darn good price I could not pass it up.

 

[Vicshalls]

OK, what you can do is determine what the distance between the adjustable 510 screw and the inner air tube screw is.
Cut a spacer/washer that size and place it between them, tighten the 510 screw while holding the positive block in the atty. Voila fixed.

I made my spacers from a brass pen refill tube, I expect a plastic refill tube would also work.

Gonna have to look into that. It get annoying especially if I am driving.

Sent from my XT1097 using Tapatalk

 

[Woofer]

Gonna have to look into that. It get annoying especially if I am driving.

Good luck, an added bonus is with this mod the r 91% works perfectly with temperature limiting devices.

 

[Pinggolfer]

Thanks, Knicks.

R

Imagine coming from Latvia to New York to play basketball and get free shipping from provape.

 

[raitizz]

Imagine coming from Latvia to New York to play basketball and get free shipping from provape.

...and not vape... I can imagine.

R

 

[Katdarling]

Vape Mail

VERY sweet, Willy the Z!

 

[classwife]

What is this on the top please ??

 

[WillyZee]

Authentic Kayfun Lite v2+ with a cheap bellcap


Sent via iPhone

 

[raitizz]

What is this on the top please ??

The Bell Cap.. Ping and Rod to the rescue!

R

 

[classwife]

Authentic Kayfun Lite v2+ with a cheap bellcap


Sent via iPhone

The Bell Cap.. Ping and Rod to the rescue!

R

Do they have those for the regular (original) Kayfun Lites ?
I like the looks

 

[raitizz]

Do they have those for the regular (original) Kayfun Lites ?
I like the looks

The one in the pic is on a KFL. And I think, Willy wouldn't have a cheap one.

R

 

[rbrylawski]

The Bell Cap.. Ping and Rod to the rescue!

R

Willy, please don't hit me if I'm wrong, but I think it's a FT accessory for the KFL. What Ping and I have are Trippy Tips Plasma tanks for our KFL+, which are all glass (including the chimney) and hand blown by Bert of Trippy Tips in Colorado. Here are two pics:

 

[WillyZee]

Do they have those for the regular (original) Kayfun Lites ?
I like the looks

it is this bellcap ... under $4

$3.98 Kayfun Bell Cap Kit w/ 510 Drip Tip - acrylic + stainless steel / Kaufun logo at FastTech - Worldwide Free Shipping