Has Proteus arrived in the U.S. yet? Trying not to get too excited. It makes time go by too slow.
Proteus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
I received mine yesterday . lt is a piece of art! what is really impressive is that it improves the liquid consumption ! or is it my idea?
Sent from my SM-N9208 using Tapatalk
Sent from my SM-N9208 using Tapatalk
of course it does that Kost. The simple reason is that VIR checks the liquid on wick and gives the necessary smoke. Now, the less the liquid, the bigger the smoke (because too much liquid cant be burned easily) BUT without burned taste because of VIR'S function.
I have already said that in previous posts. With a GG atomizer on Proteus, you can leave the liquid control a little open and still vape with big clouds while your liquid consumption is reduced
I have already said that in previous posts. With a GG atomizer on Proteus, you can leave the liquid control a little open and still vape with big clouds while your liquid consumption is reduced
Ordered Proteus Saturday morning ; received today - Fedex are the best ! - after some cleaning all threads both Proteus and my Pene V3 , make a 0.6 ohm coil , asembling toghether and vape. YES ! Imeo you made my day . Sincerelly don't know when / if will use another e-device ( including other GG device and have some Gg stuff). Again, thank you Imeo and keep going on . We need you.
Imeo, I hate to sound impatient, but has the shipment for FMS been shipped? If so, when?
Thank you kind sir. I'm impatiently, I mean patiently awaiting word so that I may begin preparations for the union of your beautiful creations.
Thank you kind sir. I'm impatiently, I mean patiently awaiting word so that I may begin preparations for the union of your beautiful creations.
hi imeo
nowadays im so so busy so can't be concerned about vaping world.
but still use my tilemahos v1 and feel sadisfaction
thanks !!
yesterday i have know proteus's launching.
congratulation!
but just up to 700...
i had reservation my proteus #1055. it is my favorite number.
when can i get my #1055??
nowadays im so so busy so can't be concerned about vaping world.
but still use my tilemahos v1 and feel sadisfaction
thanks !!yesterday i have know proteus's launching.
congratulation!
but just up to 700...
i had reservation my proteus #1055. it is my favorite number.
when can i get my #1055??
hi UT, I am glad to see you back! I know about work and it has to come first always!
Numbers are up to 700, so there is no chance for other numbers. If you really like Proteus, you can buy one
Numbers are up to 700, so there is no chance for other numbers. If you really like Proteus, you can buy one
proteus arrived already at skysmoker
he is assembling the units
ThanK's brem!
Have just received the shipping confirmation.
I read the instruction on the first page and also watched whole video tutorial.
One way or another I willl have Tilemahos X1 next week so I have one question.
As I read all info regarding Tilemahos, it works with SS wire. On the other hand, when talked about Proteus only titanium wire is mentioned.
So my question is - would Proteus features work with Tilemahos and how (by "how" I don't mean tehnically but would it function properly same as with titanium wire)?
And one general question: I was always vaping atomisers/cartomisers with 1.8-2.2 ohm. What's the difference with low resistance, let's say from 0.5 to 1 ohm? I ask because I have never tried and don't even have a slightest idea.
One way or another I willl have Tilemahos X1 next week
so I have one question.As I read all info regarding Tilemahos, it works with SS wire. On the other hand, when talked about Proteus only titanium wire is mentioned.
So my question is - would Proteus features work with Tilemahos and how (by "how" I don't mean tehnically but would it function properly same as with titanium wire)?
And one general question: I was always vaping atomisers/cartomisers with 1.8-2.2 ohm. What's the difference with low resistance, let's say from 0.5 to 1 ohm? I ask because I have never tried and don't even have a slightest idea.
Imho, no, Proteus won't work with SS.
I've tried a 1.0Ohm SS316 build on it (no spring, regular coil in a Kayfun Mini) and it didn't "work".
Well, it did vape, but it always blew full power to my coil with red lights ("cannot reach desired temperature") even on the lowest temp setting. Proteus tried to give it full power to reach the wrong temperature. Imeo will correct me if I'm wrong, but imho it's because SS has a lower TCR (resistance change lower with temperature than Ti) and hence Proteus thinks the temperature is far lower than it actually is so it gives full power to reach the temp which of course he never can because that SS would be far too hot in reality if he did.
You could either make your own Ti springs for Tile or go a different way. I've found the Tile to be too bulgy on the Proteus, tried a Kafun Mini V3 which is still 2mm wider than Proteus and ended up with a Penelope V4. If you're a MTL vaper you'll love Penelope, for lung-hitters the draw is probably to tight
On regulated mods it's not much of a difference, my .25mm Kanthal 2 Ohm builds taste pretty much the same (imho) than my .25mm Ti1 .7 Ohm builds (and my .25 SS 1 Ohm)
The difference would be a big one on a mech as power would be 6 Watt for my Kanthal vs 20 Watt for the Ti1 build on a normal Li-Ion battery.
Thank you for detailed and very helpful answer.
I am awful in building coils and that's the reason I have sold all my GG's (Ody, Ithaka and Peny) and stick with cartos. I am bying Tilemahos exactly because it's so easy to build coil and I would do that with Coil Master.
So, if Titanium wire is easily bent and could be made with Coil Master, I don't mind making my own Ti coils. But I never used Ti so I don't know what would I be dealing with.
I am MTL vaper so no problem with that. I will probably buy Peny again when Imeo make springomiser rebuildable for it, as he said. Until then I will just get used to being little bulky on Proteus.
Something else to consider is that the circuit board in Proteus will also be possible to install in Esterigon in a while when Imeo will make the needed extra parts. You'll need a 21mm Tilemahos, or other atties, for Esterigon though.
And now new level of confusion.
I wanted to buy 22mm Tilemahos which would look nice with Provari with ring (until I get Proteus) and then you mentioned Esterigon... and now I don't know which Tilemahos to get, 21 or 22mm.
I wanted to buy 22mm Tilemahos which would look nice with Provari with ring (until I get Proteus) and then you mentioned Esterigon... and now I don't know which Tilemahos to get, 21 or 22mm.
- Status
Similar threads
