ProVape/Provarinati collaboration - Help pick a new design!
- Thread starter PLANofMAN
- Start date
- th_trl_thread_readers 0
- Status
What kind of black ceramic glaze? I have a kiln and could give it a try but I don't know what to use on stainless steel. I do know that stainless steel will discolor in temperatures higher than 950 degrees so they would all have to be cleaned up after.
Since apparently we can't all decide on just one design, looks like we'll have to settle on two end-caps -- one featuring the eye (which would also sell more to non-ECF'ers), & the other featuring the ambigram...
I too would like to see the Provarinati picture stay the same or at least be close too what we all see and used to seeing on ECF.
The All Seeing eye in a pyramid with Provarinati and LUMEN SEES TOTUS.
Can the Made in USA be put on the side?
I'm just saying, Yea the ProVari is made in the USA (everyone knows this) but isn't the Provarinati world wide?
We don't want people thinking we're just a American cult but more like a world wide Cult
We welcome people from any country that sales or can smuggle in ProVari's.
Another thing and Most Important thing, is the Great People at ProVape Seen it, Like it, and want to use it, so why change it?
The All Seeing eye in a pyramid with Provarinati and LUMEN SEES TOTUS.
Can the Made in USA be put on the side?
I'm just saying, Yea the ProVari is made in the USA (everyone knows this) but isn't the Provarinati world wide?
We don't want people thinking we're just a American cult but more like a world wide Cult
We welcome people from any country that sales or can smuggle in ProVari's.
Another thing and Most Important thing, is the Great People at ProVape Seen it, Like it, and want to use it, so why change it?
Last edited:
I too would like to see the Provarinati picture stay the same or at least be close too what we all see and used to seeing on ECF.
The All Seeing eye in a pyramid with Provarinati and LUMEN SEES TOTUS.
Can the Made in USA be put on the side?
I'm just saying, Yea the ProVari is made in the USA (everyone knows this) but isn't the Provarinati world wide?
We don't want people thinking we're just a American cult but more like a world wide Cult
We welcome people from any country that sales or can smuggle in ProVari's.
Another thing and Most Important thing, is the Great People at ProVape Seen it, Like it, and want to use it, so why change it?
What he said!
I really don't care if it has Made in the U.S.A. written on it. All the Provarinati know where it's made.
Sent from my iThingy using Tapatalk
Last edited:
Normally yeah, allot. But I fell out my wheelchair 2 weeks ago; which, was also a month after I had a major cardiovascular surgery done on my femoral artery. When I fell out the chair I snapped my tibia and fibula in two places. So, I've been stuck in the bed for two weeks now, with my leg in a cast and elevated.
I have to go in to the hospital in 4 hours to get tests done and I'm a nervous wreck. So ready to get out of this house. Just hoping the orthopedist says I can transfer into the car again. I drive a Trans Am and it sits 2-3 feet lower than the wheelchair so transferring with a broken leg may be a bad idea. Not to mention the tests are to make sure I didn't screw up the surgery they did- that recovery period had literally just ended; and, that was no birthday party either. 8 incision sites and half of them didn't close all the way.
Last edited:
So...ummm...did you get the warning/infraction before or after telling us your call sign was your call sign?
Kinda dig this one
Me too! Dig in' it. If the vent holes are incorporated in the circle, and the Lumen Sees Totus were curved on the bottom like the provarinati is at the top maybe even in the same font, I just might be one happy camper
Me too! Dig in' it. If the vent holes are incorporated in the circle, and the Lumen Sees Totus were curved on the bottom like the provarinati is at the top maybe even in the same font, I just might be one happy camper
Limited as to what I have to work with, and I don't have the font but this is about as close as I could get
I have several types, I have not looked at them yet, it was just a thought, I did not know about the color change, I think they fire above 1000 degrees F, so I would have to do a test first, one is a ceramic clay based, and the other is a high gloss ceramic glaze, I will try to look at them closer tonight.
KAS
Last edited:
Please keep in mind that the collector caps are engraved, not colored, so the designs will look differently than the ones people are experimenting with. And again, the caps are small, so fine details won't show up very well. I'm also still convinced that if we use a triangle it should be equilateral to give to more space for other elements.
The stuff I'm posting is moreless me playing with some really basic programs just to try and let me see a generalization of what I may or may not like. "Just trying to get an idea" this way. I don't have access to any of the CAD or Good Graphic programs here. I noticed that A couple of us were throwing out the same sort of ideas so I went ahead and posted the pics. But all this really is some layering programs and adjusted size "guestimations." I'm guessing that whatever design is decided would have to be reworked in autodesk for the exact specs and machining process.
When I get home tonight I will (probably) have time to sit down and work in some of the suggestions. Keep the curved "Provarinati" logo, redo the triangle so it's equilateral, adjust the background circle so there's room for vent holes, rework the new eye with the ProVari pupil and see if that makes it look any better, and pick a legible font for the lumen sees totus.
We'll put the "Made in the U.S.A. on either the rim of the end cap, or inside around the spring hole. This will separate it from the Provarinati aspects of the design.
How does that sound?
Edit:
I'll do one of each, one with the new eye (revised), and one with the old eye style, but I think we're getting close to having a final design that most of us can agree on.
From what I've seen the split is about 50/50 on donations, so how about we just have the donations go half and half to WWP and CASAA?
We'll put the "Made in the U.S.A. on either the rim of the end cap, or inside around the spring hole. This will separate it from the Provarinati aspects of the design.
How does that sound?
Edit:
I'll do one of each, one with the new eye (revised), and one with the old eye style, but I think we're getting close to having a final design that most of us can agree on.
From what I've seen the split is about 50/50 on donations, so how about we just have the donations go half and half to WWP and CASAA?
Last edited:
- Status
Similar threads
- Locked
