What do you want to see on a version III ProVari?
- Thread starter PLANofMAN
- Start date
- th_trl_thread_readers 0
- Status
Grampa used to say "If it ain't broke, don't fix it!"
I bought my first ProVari 2+ years ago, and after a dozen drops, falls or pushes onto tile, concrete and wood floors...a few dives into the sink and a couple in the rain and once into a huge puddle...(but NEVER into the toilet!).. my ProVari is more dependable than a Timex.
I went directly from my cig-a-like to my ProVari, and it endured all if my vaping growing pains...from overfilled cartos to leaking ProTanks...I bought my RED ProVari Mini the first week it was introduced, and it has endured all the same abuse. My son, on the other hand, has purchased a plethora of this week's "gotta-have-it" mod of the Day...and while I'm very proud of how he has educated himself in the vape world to the point I no longer know what he's talking about, he owns mods that require a fork lift to vape!! Yet, NONE are as well made as my ProVari! I am very happy with the ProVaris I own. Yes, I will buy another one (I REALLY want the DRAGON!) Yet, with all the many mods my son owns...when he goes off on an adventure, what mod does he take? My original ProVari..."because it's DEPENDABLE, Mom!"
Yes, I'd like a "Zen" coating that doesn't look so...uh...GOLD...and you are right, I don't care much for the "new" tear-drops or waves designs on the newer version, sure, add engraving, or special caps or production numbers...go ahead, change the electronics, or make it variable wattage....just don't change that it is "the Cadillac of Mods"...I REFUSE to buy a PROVARI CLONE...I'm happy buying the best of the best. It's AMERICAN made, and THAT is important to me too...
As long as I have my ProVari, American made juice and can stay away from that stinky 47 year habit I USED to have...I'm happy...just bury me with my favorite ProVari in my hand...
I bought my first ProVari 2+ years ago, and after a dozen drops, falls or pushes onto tile, concrete and wood floors...a few dives into the sink and a couple in the rain and once into a huge puddle...(but NEVER into the toilet!).. my ProVari is more dependable than a Timex.
I went directly from my cig-a-like to my ProVari, and it endured all if my vaping growing pains...from overfilled cartos to leaking ProTanks...I bought my RED ProVari Mini the first week it was introduced, and it has endured all the same abuse. My son, on the other hand, has purchased a plethora of this week's "gotta-have-it" mod of the Day...and while I'm very proud of how he has educated himself in the vape world to the point I no longer know what he's talking about, he owns mods that require a fork lift to vape!! Yet, NONE are as well made as my ProVari! I am very happy with the ProVaris I own. Yes, I will buy another one (I REALLY want the DRAGON!) Yet, with all the many mods my son owns...when he goes off on an adventure, what mod does he take? My original ProVari..."because it's DEPENDABLE, Mom!"
Yes, I'd like a "Zen" coating that doesn't look so...uh...GOLD...and you are right, I don't care much for the "new" tear-drops or waves designs on the newer version, sure, add engraving, or special caps or production numbers...go ahead, change the electronics, or make it variable wattage....just don't change that it is "the Cadillac of Mods"...I REFUSE to buy a PROVARI CLONE...I'm happy buying the best of the best. It's AMERICAN made, and THAT is important to me too...
As long as I have my ProVari, American made juice and can stay away from that stinky 47 year habit I USED to have...I'm happy...just bury me with my favorite ProVari in my hand...
Last edited:
This is what it will take for me to buy one. A minimum of 50 watts and a 20 amp limit. Ideally I would like closer to 75 watts and 30 amps.
I really feel that Provape NEEDS to do at least 50 watts to stay relevant if they want the new Provari to have a fighting chance in the next year or more. There are many regulated devices on the market these days that offer 75+ watts and support down to .3 ohms
Then there is the VariAnt which I think got it bang on. 120watt max with a 30amp limit and support down to .2 ohms.
I almost never use my Provari these days because I've grown to love .3 ohm builds and I would love to have a new Provari to run those builds on.
I really feel that Provape NEEDS to do at least 50 watts to stay relevant if they want the new Provari to have a fighting chance in the next year or more. There are many regulated devices on the market these days that offer 75+ watts and support down to .3 ohms
Then there is the VariAnt which I think got it bang on. 120watt max with a 30amp limit and support down to .2 ohms.
I almost never use my Provari these days because I've grown to love .3 ohm builds and I would love to have a new Provari to run those builds on.
Well, we now have a box and a Provarinati end cap. I'd like to think it was all due to this thread...
But I know it wasn't. Still, this is a good way for ProVape to keep a finger on the pulse of the customers' needs and wants.
But I know it wasn't. Still, this is a good way for ProVape to keep a finger on the pulse of the customers' needs and wants.
I got my first proVari two 1/2 years ago and since then i stayed away from the regular cigarette and even comfortable.
Then fuming with clearo atomizers.
Today, because the way my vaping has changed and i demand to have repaired as rba/rda and low resistances do not offer me something in this proVari. In the drawer is a few months.
But to avoid seeming ungrateful because i got it and love my proVari and get the next one I absolutely must have the following:
I) Increase limit amps.
II) To regulate watts and playing over 25 watts.
III) Telescopic tube gets all 18XXX battery sizes.
IV) Be straight-flat with top cover.
V) Quality steel combined good paint silver.
And finally to remain the same in size. Publishing over tube and box for those who prefer alternative.
I will always love my proVari because it around the've accomplished
Then fuming with clearo atomizers.
Today, because the way my vaping has changed and i demand to have repaired as rba/rda and low resistances do not offer me something in this proVari. In the drawer is a few months.
But to avoid seeming ungrateful because i got it and love my proVari and get the next one I absolutely must have the following:
I) Increase limit amps.
II) To regulate watts and playing over 25 watts.
III) Telescopic tube gets all 18XXX battery sizes.
IV) Be straight-flat with top cover.
V) Quality steel combined good paint silver.
And finally to remain the same in size. Publishing over tube and box for those who prefer alternative.
I will always love my proVari because it around the've accomplished
Sooo when is this thing out? Any details on the look? Features?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
It could be shaped like a banana for all we know. The only thing for sure is that it's currently in testing.
I'm partial to kiwis, so I'm hoping it's shaped like a kiwi*.
* Disclaimer: I actually can't stand kiwis, but I liked the way it sounded.
Sent from a Galaxy, far-far-away.
I heard somewhere that you have to navigate the menu to turn on/off. I rather like the ability to turn off the device using the fire button, similar to the iTaste and EVODS, so I'd like to see that on a version three.
Now that's something I'd admittedly jump at. Hey, I like boxes better than tubes - what can I say? It's probably a "guy" thing.
Just sayin'...
Just thought of this today.
How about unifying the mini and standard line, and offer a base mini-sized that comes with a extension TUBE to make it 18490 size + a flat end cap. Then give us the option of buying an additional extension tube to make it 18650 size.
I'm just thinking it would be handy as hell, just because as much as I love my provari, taking my 18650 + kayfun out with me for a night of partying was pretty awful. Would've been sweet if I could just swap it to 18350 mode.
Burping out loud using Tapatalk
How about unifying the mini and standard line, and offer a base mini-sized that comes with a extension TUBE to make it 18490 size + a flat end cap. Then give us the option of buying an additional extension tube to make it 18650 size.
I'm just thinking it would be handy as hell, just because as much as I love my provari, taking my 18650 + kayfun out with me for a night of partying was pretty awful. Would've been sweet if I could just swap it to 18350 mode.
Burping out loud using Tapatalk
Last edited:
18350 mode + KFL with nano tank kit is perfect out and about size
I turn mine off when not in use for a few days.
Sent from a BIG phone.....Galaxy Note 3
Exactly! Extra convenience and flexibility/option for consumers, one more accessory for the business. Win win.
Burping out loud using Tapatalk
Last edited:
- Status
