immediately ; in fact when my first Darwin went bad, i got the replacement before i even sent it back !!! wow.
-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
- Status
hey guys what happens with the warrenty if i get another Provari? i would need another warranty correct? also if i sell my Provari and buy the chrome Provari should i sell the warranty with it and just purchase a new warranty? That chrome P looks awesone anyone have it? whats your thoughts. My Provari that i purchased when it first came out is still mint and it has a custom fit leather case. Thanks for any input
Cos, the warranties are non transferable, yes you would need a separate warranty for another unit.
Hope this helps.
ProVape.com MonsterKenny
Hope this helps.
ProVape.com MonsterKenny
Actually it is still under happening now. I hope to get the money back, soon.
Is there any way to defeat the protection to use the 1.5 ohm dual cartos at higher voltages?
I am not a fan of CE2 cartomisers either, so no interest in MAP tanks. I have a vapemate, sits unused, I don not like how much it cools the vape. Makes it cloying in your throat. I am not a fan of normal cartos, too easy to get that horrid burnt fill taste .. having said all that. I have made several liquinator type clones, from old ego atty case shells and O rings and currently a cut down 10ml syringe. A 10ml syringe one holds about 2ml of juice outside the carto .. a 20ml apparently 4ml.
No need to cut slots (tho i do at the moment), I have been told 4 <1mm holes punched into the carto base with a screw works great.
Oh, these things are great.. snaps and crackles like a good carto from start to finish.
click to zoom..
Without voiding the warranty, or damaging the unit.... I doubt it. Did you ever try the 2.5ohm at 6v. That might work
none needed for liquinator 510....2 needed for DS...all tho I have used mine with out on a 510..
Last edited:
none needed for liquinator....2 needed for DS...all tho I have used mine with out on a 510..
i got a modders connector for 510, i think that will work for the drip shield, someone correct me if im wrong
Hi All,
I received my Tank-O-Matic Liquinator two days ago and I absolutely love it! I am surprised at how good it looks in person and it look like it was almost made for the ProVari. I originally planned on only using the tank at home, but after seeing it on the device I have no problem using it in public. I saw pictures of the stainless steel prototype and can’t wait to order it. The stainless one will definitely look like it is part of the device. I plan on ordering anther original model so I can switch juices easily. I can fill the tank and put in a freshly charged battery in the morning and it will last me until I go to bed. I no longer need to carry any extra batteries or juice! I am finely satisfied with vapeing experience because the ProVari and the Tank-O-Matic Liquinator are the perfect combination.
I received my Tank-O-Matic Liquinator two days ago and I absolutely love it! I am surprised at how good it looks in person and it look like it was almost made for the ProVari. I originally planned on only using the tank at home, but after seeing it on the device I have no problem using it in public. I saw pictures of the stainless steel prototype and can’t wait to order it. The stainless one will definitely look like it is part of the device. I plan on ordering anther original model so I can switch juices easily. I can fill the tank and put in a freshly charged battery in the morning and it will last me until I go to bed. I no longer need to carry any extra batteries or juice! I am finely satisfied with vapeing experience because the ProVari and the Tank-O-Matic Liquinator are the perfect combination.
sounds great TO, is there any model that works better on the ProVari?
i see there are a couple options... please tell what model and carto you use.. i assume the Dual Coil is an LR so not for the Vari...?
i see there are a couple options... please tell what model and carto you use.. i assume the Dual Coil is an LR so not for the Vari...?
Hi ukeman,
I just ordered the black standard 510 3ml model with regular cartomizers. I have a sensitive mouth and I am afraid to try the dual cartomizers because I read the burn hotter. I had a bad experience with the CE2 burning the roof of my mouth even at 3.7 volts. My mouth was burnt so bad that I thought I was allergic to PG so I switched to 100% VG and the problem did not go away. I then decided to go back to the standard cartomizers and atomizers and healed up in a couple of days. I was also able to use PG again without any issues.
I am not really a fan of the standard cartomisers because of the burnt taste you get if you let them dry out to much, and I hate having to carry around the condom and a bottle of juice to fill them. The Tank-O-Matic Liquinator eliminates both of these problems and I can vape at 4.1 to 4.4 depending on the juice without any issues. I also like that the flavor stays the same throughout the use of the tank. I can see how people are reporting that their carts are lasting a week or more with the Tank-O-Matic Liquinator because as long as the tank is filled the element has no chance of dry burning, which is what kills these carts.
I just ordered the black standard 510 3ml model with regular cartomizers. I have a sensitive mouth and I am afraid to try the dual cartomizers because I read the burn hotter. I had a bad experience with the CE2 burning the roof of my mouth even at 3.7 volts. My mouth was burnt so bad that I thought I was allergic to PG so I switched to 100% VG and the problem did not go away. I then decided to go back to the standard cartomizers and atomizers and healed up in a couple of days. I was also able to use PG again without any issues.
I am not really a fan of the standard cartomisers because of the burnt taste you get if you let them dry out to much, and I hate having to carry around the condom and a bottle of juice to fill them. The Tank-O-Matic Liquinator eliminates both of these problems and I can vape at 4.1 to 4.4 depending on the juice without any issues. I also like that the flavor stays the same throughout the use of the tank. I can see how people are reporting that their carts are lasting a week or more with the Tank-O-Matic Liquinator because as long as the tank is filled the element has no chance of dry burning, which is what kills these carts.
My provari is still working like a champ, I still am using the original 2 batts that I recieved with my provari, I was one of the first 200 to get this thing and its been such a great vaping machine .......rock on everyone
7 - 8 months with 2 from early on.... run all day and eve both; dripping 95% of the time. When you get to this level of device, you don't worry about anything but juice and accessories.
Just retired my first 2 sets of batts which were dropping to about 75% staying power and i expect to be beta testing the new Provari 18650 power batt tomorrow.
The only things i"ve had to focus on are juice and attys... those new re-buildable attys with all that vapor!!! will be the next thing i get to look forward to (courtesy of one of the Provari beta tester friends)... can't wait.
Just retired my first 2 sets of batts which were dropping to about 75% staying power and i expect to be beta testing the new Provari 18650 power batt tomorrow.
The only things i"ve had to focus on are juice and attys... those new re-buildable attys with all that vapor!!! will be the next thing i get to look forward to (courtesy of one of the Provari beta tester friends)... can't wait.
I use a 2.0Ω LR Boge carto in a tank on my Provari with no problem and can go as high as 4.8 volts without an issue. I keep hearing about people having issues with errors at these levels. If I remember correctly, there is a 2.5 amp limit on these, right? The only thing stopping me from buying another Provari as a backup is that each one seems to have a life of it's own concerning when the low battery indicator starts flashing and where the amp limit kicks in. I can go as low as 2.4 volts before the low battery warning even thinks about starting to flash. Have they got these issues ironed out yet? Am I the only person whose Provari works perfectly as advertised?
My ProVari only goes down to 3.3v, so you must have a different version. If I go down past 3.3v, it swings back around to 6.0v.
And you should be able to go to at least 5.0v on a 2 ohm atty/carto. That's where you'll hit 2.5 amps.
EDIT: I'm now thinking you mean 2.4v on your battery?
Last edited:
Uke, I have been running the new Provari Batt now for 5 days, the thing is a monster, run times are way way way longer then the AW IMR 18650 your gonna like it.
- Status
