ProVarinati Deaddog Saloon

[AngiBe]

Thx guys and I found the posts. You guys were 100% correct..it was Ikanvape and of course, they are out again on the Megas I wanted to try. I'm going shopping tonight or tomorrow and here's my list. If anyone has any advise or something I should add or delete, I'm open for suggestions! My new IBtanks (19 mm, two of them) come this week and I don't have any extra cartomizers yet.

Ikenvape-
510 fusion flanged prepunched LR 2.0
510 mega plat srs

Stormy Vapor (I think that's where it is)
SmokTech 1.7 prepunched
(I probably need to check out 2.0 too)

House of Vapor-
Stingray open bottom atty for my Aurora tank

And I need advise on a great dripping atty set up for the ProVari. I'm am DONE filling tanks to test out a new juice only to find either I don't like the juice or its not steeped enough. Then I have to dump the juice and clean the tank...such a pain in the bootie.

 

[Shinu77]

I believe your inquiry about the square bottle and 5 pawns is directed at this member's post:

I've only tried Gambit from Five Pawns. It's ok. But not my top five. The square bottle is curious George. Only flavor I tried as well. Will be trying more of theirs. I wanna try Frankenvape and Dead mans party.

 

[AngiBe]

I've only tried Gambit from Five Pawns. It's ok. But not my top five. The square bottle is curious George. Only flavor I tried as well. Will be trying more of theirs. I wanna try Frankenvape and Dead mans party.

First time I tried Gambit at a B&M about two months ago, blew me away. Bought a sample pack about a month ago, not so much. I feel like they changed the formula or something and not for the better. Grandmaster, however, is awesome.

Who is the juice vendor on the square bottles? I know I saw a write up on those but can't think of who it is. Zeus juice or something like that?

 

[Shinu77]

Thx guys and I found the posts. You guys were 100% correct..it was Ikanvape and of course, they are out again on the Megas I wanted to try. I'm going shopping tonight or tomorrow and here's my list. If anyone has any advise or something I should add or delete, I'm open for suggestions! My new IBtanks (19 mm, two of them) come this week and I don't have any extra cartomizers yet.

Ikenvape-
510 fusion flanged prepunched LR 2.0
510 mega plat srs

Stormy Vapor (I think that's where it is)
SmokTech 1.7 prepunched
(I probably need to check out 2.0 too)

House of Vapor-
Stingray open bottom atty for my Aurora tank

And I need advise on a great dripping atty set up for the ProVari. I'm am DONE filling tanks to test out a new juice only to find either I don't like the juice or its not steeped enough. Then I have to dump the juice and clean the tank...such a pain in the bootie.

You should try laser slotted boges from sure Vapes.

 

[Preloader]

I got in on the Ikenvape platinums when he posted the link. I'm curious to see if they are all that they get hyped to be.

I'm a lil confused when you mention mega. Aren't megas the larger fatter cartos? They won't fit in standard carto tanks.

Dripping Atty I use id the JoyeTech 510 atty from ProVape. It took me a lil getting used to, but with Oce's blog help, I now frequently use it to sample new juices. I even take it with me to B&Ms to taste before I buy. Cleaning it is a breeze. I run hot water through it, and then leave it by the heater vent. It's dry and ready in 3 minutes.

This reminds me I should order more. It's been working fine, but if it ever DOES go out, I want to be prepared.

 

[EddardinWinter]

I got in on the Ikenvape platinums when he posted the link. I'm curious to see if they are all that they get hyped to be.

I'm a lil confused when you mention mega. Aren't megas the larger fatter cartos? They won't fit in standard carto tanks.

Dripping Atty I use id the JoyeTech 510 atty from ProVape. It took me a lil getting used to, but with Oce's blog help, I now frequently use it to sample new juices. I even take it with me to B&Ms to taste before I buy. Cleaning it is a breeze. I run hot water through it, and then leave it by the heater vent. It's dry and ready in 3 minutes.

This reminds me I should order more. It's been working fine, but if it ever DOES go out, I want to be prepared.

You frequently use these...on your ProVari, naturally...

 

[kas122461]

My google won't translate that, do you know a expected delivery date?

Mine is on the way. From Russia, with love...

Here is the latest e-mail:


Здравствуйте, Chris

Статус вашего заказа #10004187 был изменен на Отправлен

Заказ помещен в статус Отправлен
Добавлен комментарий: RA216973455RU

Вы можете посмотреть статус вашего заказа и историю его обработки онлайн.

С наилучшими пожеланиями, SvoёMesto
Интернет-магазин «SvoёMesto»



Tapped out

 

[Zbeast08]

I got in on the Ikenvape platinums when he posted the link. I'm curious to see if they are all that they get hyped to be.

I'm a lil confused when you mention mega. Aren't megas the larger fatter cartos? They won't fit in standard carto tanks.

Dripping Atty I use id the JoyeTech 510 atty from ProVape. It took me a lil getting used to, but with Oce's blog help, I now frequently use it to sample new juices. I even take it with me to B&Ms to taste before I buy. Cleaning it is a breeze. I run hot water through it, and then leave it by the heater vent. It's dry and ready in 3 minutes.

This reminds me I should order more. It's been working fine, but if it ever DOES go out, I want to be prepared.

I ordered some as well!! The mega are the 45mm length for the Xl tanks, I think......
I use the same attys Pre, mrmann has a dripping thread and I also learned alot from those guys and it is suggested to keep the atty wet while storing to prolong the life!! I use some flavor eraser from vixen to swap different flavors while sampling new juices, works quite well actually except for the heavy coffee flavors. I find these 510 attys on sale quite often from dizzciggs or something like that and have an atty for fruits, menthols,tobaccos, etc. just a thought!!

 

[Shinu77]

First time I tried Gambit at a B&M about two months ago, blew me away. Bought a sample pack about a month ago, not so much. I feel like they changed the formula or something and not for the better. Grandmaster, however, is awesome.

Who is the juice vendor on the square bottles? I know I saw a write up on those but can't think of who it is. Zeus juice or something like that?

It's "The Standard Vape"

 

[kas122461]

Here is the one I am using on my Provari's
Cyclone Rebuildable Atomizer by Vicious Ant Precision Engineering and Research - Cyclone Rebuildable Atomizer Information
Here is the one I would like to get.
eBaron Dripper Pro
The thing is if I get one of these, I also want to get one of these also.
Zappers
Because you have to use NR wire with these

Thx guys and I found the posts. You guys were 100% correct..it was Ikanvape and of course, they are out again on the Megas I wanted to try. I'm going shopping tonight or tomorrow and here's my list. If anyone has any advise or something I should add or delete, I'm open for suggestions! My new IBtanks (19 mm, two of them) come this week and I don't have any extra cartomizers yet.

Ikenvape-
510 fusion flanged prepunched LR 2.0
510 mega plat srs

Stormy Vapor (I think that's where it is)
SmokTech 1.7 prepunched
(I probably need to check out 2.0 too)

House of Vapor-
Stingray open bottom atty for my Aurora tank

And I need advise on a great dripping atty set up for the ProVari. I'm am DONE filling tanks to test out a new juice only to find either I don't like the juice or its not steeped enough. Then I have to dump the juice and clean the tank...such a pain in the bootie.

 

[Susan W.]

All this talk about cartos is making me want to try them again. Maybe I'll have better success now that I kind of know what I'm doing.

 

[CrimsonJack]

Thx guys and I found the posts. You guys were 100% correct..it was Ikanvape and of course, they are out again on the Megas I wanted to try. I'm going shopping tonight or tomorrow and here's my list. If anyone has any advise or something I should add or delete, I'm open for suggestions! My new IBtanks (19 mm, two of them) come this week and I don't have any extra cartomizers yet.

Ikenvape-
510 fusion flanged prepunched LR 2.0
510 mega plat srs

Stormy Vapor (I think that's where it is)
SmokTech 1.7 prepunched
(I probably need to check out 2.0 too)

House of Vapor-
Stingray open bottom atty for my Aurora tank

And I need advise on a great dripping atty set up for the ProVari. I'm am DONE filling tanks to test out a new juice only to find either I don't like the juice or its not steeped enough. Then I have to dump the juice and clean the tank...such a pain in the bootie.

That Stingray is a great dripping atty, as is the HH.357. Just screw 'em in, maybe invest in a drip shield, and you are good to go! Oh, and I haven't tried them yet, but I have heard really good things about IKV's atty's, as well, so if you are ordering from there anyway for your cartos, might be worth giving one a try.

 

[AngiBe]

I got in on the Ikenvape platinums when he posted the link. I'm curious to see if they are all that they get hyped to be.

I'm a lil confused when you mention mega. Aren't megas the larger fatter cartos? They won't fit in standard carto tanks.

Dripping Atty I use id the JoyeTech 510 atty from ProVape. It took me a lil getting used to, but with Oce's blog help, I now frequently use it to sample new juices. I even take it with me to B&Ms to taste before I buy. Cleaning it is a breeze. I run hot water through it, and then leave it by the heater vent. It's dry and ready in 3 minutes.

This reminds me I should order more. It's been working fine, but if it ever DOES go out, I want to be prepared.

Glad you told me that about the mega...wouldn't have been a happy camper if I bought them then found out they were too big. New to all this carto stuff, but learning.

 

[pennysmalls]

One of my all time fav is Halo's Voodoo. It's a mild tobacco base w/a hint of cinnamon w/black currant, white grapes and vanilla. Is sweet but not overly. Just yummy.

Now that sounds delish and right up my alley, thanks Angie!

 

[pennysmalls]

And I need advise on a great dripping atty set up for the ProVari. I'm am DONE filling tanks to test out a new juice only to find either I don't like the juice or its not steeped enough. Then I have to dump the juice and clean the tank...such a pain in the bootie.

I first got into dripping to test my DIY juices and just happened upon Discount Vapers online one day during my research. You can get a decent dripping atomizer for $5 and they ship super fast. I ordered on a Monday afternoon and got it by Wednesday. They are easily cleaned by rinsing in hot water, letting them sit to dry for a couple of hours and then they're ready to go again. Just don't let them dry out. I drop a few drops of unflavored in them to keep them wet if I'm not using them again right away. Just don't forget you'll need a drip tip if you don't already have one, which they sell as well.

http://www.discountvapers.com/atomizers/

 

[baghandler]

Glad you told me that about the mega...wouldn't have been a happy camper if I bought them then found out they were too big. New to all this carto stuff, but learning.

You can use the longer cartos in a standard tank, they just stick out of the top of the tank a few mms, where the standard length fits flush.

 

[AngiBe]

I ordered standard. I saw the XL and thought mega just meant fatter but standar length. Wow, this is all such a new learning curve. I also order two Stingray..one open bottom for the Aurora and one for a dripping atty, at least that's what I hope I ordered!

 

[Preloader]

Yes but sometimes no.

If "Mega" suggests longer, as in XL or 45mm long, then yes. It will merely stick out the top, not really posing a problem.

If "Mega" suggests fatter, and in my experience, it does, then no. It will not fit into a regular cart tank, standard or XL.

This is what Mega always looks like when I see them in B&Ms:

But I have also seen Megas online that were standard thickness, just longer:

Just be aware of which one you are ordering.

 

[Kuma79]

All this talk about cartos is making me want to try them again. Maybe I'll have better success now that I kind of know what I'm doing.

Ive never tried a cartotank, they confuse the hell out of me

 

[AngiBe]

Ive never tried a cartotank, they confuse the hell out of me

LOLOL, I hear ya and me too. I've read blogs and threads until I'm dizzy. As soon as I think I've got it figured out, I go to order stuff and get confused again. At least w/the IBtanks I ordered, I have everything to get started all in one kit. It's the replacement stuff that has me for a loop.

Once I get the tanks and start playing, it should hopefully be clearer. Hopefully being the key word here.