Brian, I posted your deal in the deals and steals thread, hope you don't mind. Just don't make me walk the plank!!_
Red Sky Mods
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
Okey doke, I will probably send invoices tomorrow evening, as I am boxing em up for shipping. I don't bill until they are safe and sound and ready to ship. Oh, your inbox is full btw.
Yup, anyone who owns a mod number 01 thru 10 is a plank-owner and will always pay the original mod price for as long as I make these guys.
Arrr....
Avast, now ye be in hot soup! Walkin the plank is too gud for Ye! I'm talkin barnacles and abrasions, arrrr!
No, it's fine, the next person to buy a mod will get $25 off, thanks for spreading the word
Back to work I go .... ar ..
Oh yeah, of the mods 310 thru 315, numbers 310, 311, 312 are spoken for. See website for pics of available mods.
Wait, I thought were waiting on the big batt mod.......J/K. Jesse, you will enjoy the scallywag. It's a cool little mod. Plus you get the version with the drip cup and door magnets. = Awesome.
Last edited:
Yeah, I just wish someone woulda mentioned drip cup and door magnets before, would have saved me some trouble.
J/K ! J/K! LOL, Some of you guys said from day one they need to be incorporated, you all finally convinced me, heh heh
Yarrr!
A Captain is only as good as his Crew!
Eh Mate?
BTW Cappy...is my Mark IV in this batch of mods?
Eh Mate?
BTW Cappy...is my Mark IV in this batch of mods?
No, sorry, haven't started on the new batch of Mark-IV's yet, that reminds me, gotta drop your package in the mail, it's all good to go now. I also got the measurements I needed.
I need to get a couple batches of Scallywags sold and out the door to finance my next wood shipment and parts. Once that is done I can get started on the batch of Mark-IV's.
Last edited:
It would be the one to match me Scallywag...Black Cherry and Ebony.
I sent it back to you so you could measure and install magnets...
Ringing any bells in there?
If so, it ain't the HarborMaster!
LOL
I sent it back to you so you could measure and install magnets...
Ringing any bells in there?
If so, it ain't the HarborMaster!
LOL
Ah, I edited my reply too late, but yeah, what I said above, heh
Lol....yeah way to much head banging over the years. Not stalking, just watching......
One thing AG, before I cut the ebony I'm going to install a brand new tablesaw blade, that stuff chips if you look at it wrong. Think I will save one special blade just for the REALLY hard hardwood.
Did you get a chance to glance at the new vid posted on the website? I don't see where I can really improve the design anymore, just the process and more exacting measurements.
Now, if I could just get a secretary to take care of all the paperwork and concentrate on mod making, arggg..
Did you get a chance to glance at the new vid posted on the website? I don't see where I can really improve the design anymore, just the process and more exacting measurements.
Now, if I could just get a secretary to take care of all the paperwork and concentrate on mod making, arggg..
Nature of the beast. Called evolution of a product.
I hear ya, fortunately I think I'm done with changes, now I can concentrate on numbers.
Here is the vid for anyone who doesn't wanna search back or go to website.
YouTube - Mark-III 3.7v bottom feed.MP4
Finally, some better close up images
Hey all, good day today, got a real start on the next batch of scallywags and the current batch is nearly done.
I wanted to avoid this question, but its been asked again so I want to clarify. These mods are Tilt and shoot, meaning you invert the mod, squeeze the bottle and the drops land on the wick/bridge. Refilling the bottle is easy, again no mess no fuss.
That does not mean that you have to use that method. The mod I currently vape on has a 1 inch metal tube in the bottle with a silicone tube on the end nearly touching the bottom of the bottle. I don't have to tilt, but that means I can vape one handed and hold a clamp, or a mod with wet finish. I don't like it as much, it's messy, if I get distracted and overfill, it can leak out the atty and refilling the bottle is a bit more of a hassle than the tilt and shoot bottle.
All that said, if you WANT bottles that are NOT tilt and shoot types, just say so and I will include them. Or I can even send you one of each with the order, your call.
(Don't blame me for sticky fingers tho)
Yarrr!
P.S., for those scallywags who already have scallywags and are sad they have to tilt and shoot, say the word and I will send you a couple non-tilt bottles, no charge.
I wanted to avoid this question, but its been asked again so I want to clarify. These mods are Tilt and shoot, meaning you invert the mod, squeeze the bottle and the drops land on the wick/bridge. Refilling the bottle is easy, again no mess no fuss.
That does not mean that you have to use that method. The mod I currently vape on has a 1 inch metal tube in the bottle with a silicone tube on the end nearly touching the bottom of the bottle. I don't have to tilt, but that means I can vape one handed and hold a clamp, or a mod with wet finish. I don't like it as much, it's messy, if I get distracted and overfill, it can leak out the atty and refilling the bottle is a bit more of a hassle than the tilt and shoot bottle.
All that said, if you WANT bottles that are NOT tilt and shoot types, just say so and I will include them. Or I can even send you one of each with the order, your call.
(Don't blame me for sticky fingers tho)
Yarrr!
P.S., for those scallywags who already have scallywags and are sad they have to tilt and shoot, say the word and I will send you a couple non-tilt bottles, no charge.
Last edited:
I have several wooden mods...different feeding systems in them.
The tilt n shoot works as well (or better) than any of them.
It's sealed on the inside, so there is no chance of an internal leak.
The new catch cup design is perfect for when the occasional overfeed happens.
I wouldn't change anything at this point, because the device works great!
PS...
I've posted your video in other Feeder discussion threads on ECF, so hopefully you'll get some hits!
The tilt n shoot works as well (or better) than any of them.
It's sealed on the inside, so there is no chance of an internal leak.
The new catch cup design is perfect for when the occasional overfeed happens.
I wouldn't change anything at this point, because the device works great!
PS...
I've posted your video in other Feeder discussion threads on ECF, so hopefully you'll get some hits!
Thanks AG, you da man!
And I agree, I wouldnt recommend it, but it is available for people who specifically ask, It will still be totally sealed on the inside but more prone to leaks when refilling bottle and at the atty IMHO.
You look ship shape and ready to eat!
Wow, you got a fan Brian.
Arr, Yarrr..arggg... well, I do try to stay in shape ....
All hands, man your guns, battle stations! Heh
- Status
Similar threads
