Red Sky Mods

[THJahar]

OOOh, look I finally got my post count up enough.
Hello there! Well I'm based in the UK, but having been on the search for a VV box mod for ages (I splashed out on a Megaladon but want a wooden box mod as well), and of all the ones I've seen yours ticks every box that I'm after.
So I guess I'm going to have to lurk on this thread until the pre-order opens!
(Please tell me you do actually ship to the UK!)
I've been vaping a month and spend most of my time over at ukvapers forum. So I'm looking forward to doing a review of the RSM Cutlass once I've bought one

 

[tierrataz]

Bumping up the latest and greatest of Cappy's innovations yet!

Even tho I'm in the middle of a batch, I have one I just needed to replace the end cap on and it is good to go, so I shot a quick video of the first operating Mark-5.1 Cutlass. Audioswap in progress but I don't wanna make people wait.

Here is is #5101

 

[emonty]

yes he does, got my Flying Dutchman (#505) in no time, exelllent mod, service, all!!

OOOh, look I finally got my post count up enough.
Hello there! Well I'm based in the UK, but having been on the search for a VV box mod for ages (I splashed out on a Megaladon but want a wooden box mod as well), and of all the ones I've seen yours ticks every box that I'm after.
So I guess I'm going to have to lurk on this thread until the pre-order opens!
(Please tell me you do actually ship to the UK!)
I've been vaping a month and spend most of my time over at ukvapers forum. So I'm looking forward to doing a review of the RSM Cutlass once I've bought one

 

[tierrataz]

Ahoy THJahar and welcome aboard!

Yes, Cappy ships worldwide ;-) I'm thinking he will be ready for pre orders about mid week if not sooner.

OOOh, look I finally got my post count up enough.
Hello there! Well I'm based in the UK, but having been on the search for a VV box mod for ages (I splashed out on a Megaladon but want a wooden box mod as well), and of all the ones I've seen yours ticks every box that I'm after.
So I guess I'm going to have to lurk on this thread until the pre-order opens!
(Please tell me you do actually ship to the UK!)
I've been vaping a month and spend most of my time over at ukvapers forum. So I'm looking forward to doing a review of the RSM Cutlass once I've bought one

 

[tierrataz]

Bumping the pre order info for THJahar and others. Lots of choices to customize your fine RSM vessel

Reposting with updated wood availability and ordering info.


Select one from each picture and you have made all the necessary choices. The skull stamp indicates it is not available.

The small catch cup is for 510 atomizer sizes, the larger one can accommodate Cannons or whatever.

All VV mods now use a 25W 3Amp adjustable switching regulator.
http://www.dimensionengineering.com/datasheets/DE-SWADJ3.pdf

Base Price; (Add additional cost of wood selected as indicated on the picture)

Buccaneer 3.7V model - $119
Buccaneer 3.7V with Voltage Display - $139

Cutlass VV model - $159
Cutlass VV with Voltage Display - $179

Mark-VI Wench - $169 (VV dripper model, basically a cutlass without a feed system)


The Cutlass/Wench VV Voltage Display models also have a dual function switch installed.
Position 1 - Checks voltage at atomizer / operating position
Position 2 - Checks battery voltage / Safety off

Main Body wood


End Cap wood


Catch Cup - Small / Large - Switch - Nickel Plated / Stainless Steel / Gloss Black


Rounded Soft Octagon

 

[Capt' Brian]

Arrr, good morning all.

The next preordering will be towards the end of the week, and I will be posting a pic of new wood selections that will be available.

I ship anywhere 'tis true, but what a pain when something needs tweaking and it has to come all the way back

Here are a couple pics of the current batch. I am about to put another coat of finish on most of them and won't be able to handle them again for a day, so am doing this now.

This is a small batch of 3.7V Buccaneers, #447 is a preorder, #450 has a voltage display in it.

Click on image to expand;

These are the dual mode Cutlass's from the batch, 5102 & 5103 are preorders & 5105 is claimed.

Lots of Padauk this run and I think I ran out of it, arrrr. The two with catch cups mounted are ready to ship and will be posted on the website tonight if I have time.



Yo ho!

 

[tierrataz]

G'day cappy! How's my ziri box? Hopefully not giving you trouble.

 

[Capt' Brian]

G'day cappy! How's my ziri box? Hopefully not giving you trouble.

She was a naughty girl, but a little spanking was all it took to straighten her up.

I sanded the edges of the door just a bit to make them flush again and filled in the check in the bottom better then gave it a new coat of finish. Just snapped these pics of her;



The door fits as flush again as any I ship out. I will be curious to see if it stays that way once it gets to your climate again

 

[Ladycats]

5102 and 5103 are pre-orders ... so does that mean the others are/will be available ????

 

[Ladycats]

That is gorgeous Taz !!!!!!!!!!!!!!

 

[THJahar]

I think I've got my heart set on a
Cutlass VV with Voltage Display 510
Rounded
Cocobola
Granadillo
Stainless steel

Can't wait (although dependent on what wood is available I might change my mind as to the mixture, choices, choices)

 

[Capt' Brian]

5102 and 5103 are pre-orders ... so does that mean the others are/will be available ????

Yup, the base price list was bumper earlier along with the wood price list. They should be ready to ship by Thursday I'm hoping, as long as I get back to work and don't blow half a day answering PM's & E-Mails, arrrr

Off I go, later all.

 

[tierrataz]

TY Cappy! It was very hard to box her up and send her back. Can't wait for her maiden vape ;-)

I hope she behaves. She had acclimated a bit the day I boxed her, flush....no. She just missed her daddy I suppose.

She was a naughty girl, but a little spanking was all it took to straighten her up.

I sanded the edges of the door just a bit to make them flush again and filled in the check in the bottom better then gave it a new coat of finish. Just snapped these pics of her;



The door fits as flush again as any I ship out. I will be curious to see if it stays that way once it gets to your climate again

 

[dfc]

Arrr, good morning all.

The next preordering will be towards the end of the week, and I will be posting a pic of new wood selections that will be available.

I ship anywhere 'tis true, but what a pain when something needs tweaking and it has to come all the way back

Here are a couple pics of the current batch. I am about to put another coat of finish on most of them and won't be able to handle them again for a day, so am doing this now.

This is a small batch of 3.7V Buccaneers, #447 is a preorder, #450 has a voltage display in it.

Click on image to expand;

These are the dual mode Cutlass's from the batch, 5102 & 5103 are preorders. Lots of Padauk this run and I think I ran out of it, arrrr. The two with catch cups mounted are ready to ship and will be posted on the website tonight if I have time.



Yo ho!

Woot! Looking goooood!!!!

(Especially the Padauk and Wenge Cutlass...but I may be a little biased!)

 

[tierrataz]

Arrrr, Lady, if you see one that strikes your fancy, best shoot a PM to Cappy right away before some sneaky pirate beats ya to it ;-)

We are a pirate lot ya know, most are pillaged before the finish dries and poor Cappy has little to put up on his website.

5102 and 5103 are pre-orders ... so does that mean the others are/will be available ????

 

[chet]

Man... that Ziri looks just awesmoe tierrataz~

 

[skydragon]

Ouch....

how'bout box elder crown!

I could use that except I actually need a bridge. Cappy?????????????

 

[Ladycats]

Arrrr, Lady, if you see one that strikes your fancy, best shoot a PM to Cappy right away before some sneaky pirate beats ya to it ;-)

We are a pirate lot ya know, most are pillaged before the finish dries and poor Cappy has little to put up on his website.

5105 be mineeeeeeeeeeeeeeeeeeeeeeeeeee

 

[tierrataz]

That is gorgeous Taz !!!!!!!!!!!!!!

Lady, there is still a ziricote body available for pre order I think. Just saying...

 

[tierrataz]

Man... that Ziri looks just awesmoe tierrataz~

Would look nice with your African Queen, no?