Status
Not open for further replies.

chet

Ultra Member
ECF Veteran
Verified Member
Jul 12, 2011
1,229
944
Vancouver, Canada
Chet do you use the upright filling or tilt?
also on what voltage? AMG LR or HV?

I'm using BF hybrid 2.0 at 4.1v.
I had been using upright feeding until couple days ago. I'm now on T&S and loving it. Never had any juice on CC yet. I just T&S for 1 sec with a gentle squeeze very often and it's been working really well.

At very first I was using upright feeding while staring at the slots and quickly release the pressure on bottle when I see bits of juice coming out of slots. This was time and energy consuming sometimes and impossible to do while driving. So I started to blindly squeeze and check by sucking without firing to see if it gurgles little, and I started to get hang of it. Still the feeding was inconsistent(sometimes I had to squeeze hard for many seconds, sometimes not), and filling the bottle was still a messy job with the inner tubing inside the bottle. So I took the inner tube out and tried T&S... and damn.. what a difference. No mess, consistent feeding to how I squeeze, quick and easy.
 

emonty

Flavor Junky
ECF Veteran
Verified Member
Oct 15, 2009
7,612
8,850
the Netherlands
Thanks Chet, good info, will try it out!
I'm using BF hybrid 2.0 at 4.1v.
I had been using upright feeding until couple days ago. I'm now on T&S and loving it. Never had any juice on CC yet. I just T&S for 1 sec with a gentle squeeze very often and it's been working really well.

At very first I was using upright feeding while staring at the slots and quickly release the pressure on bottle when I see bits of juice coming out of slots. This was time and energy consuming sometimes and impossible to do while driving. So I started to blindly squeeze and check by sucking without firing to see if it gurgles little, and I started to get hang of it. Still the feeding was inconsistent(sometimes I had to squeeze hard for many seconds, sometimes not), and filling the bottle was still a messy job with the inner tubing inside the bottle. So I took the inner tube out and tried T&S... and damn.. what a difference. No mess, consistent feeding to how I squeeze, quick and easy.
 

Capt' Brian

Unregistered Supplier
ECF Veteran
Oh yeah, before I forget again I wanted to mention that I am not playing with the voltage display anymore, I am just going to leave it plain as I have not found anything that would dim the brightness well. Guess you can always use it as a emergency flashlight, heh.
 

chet

Ultra Member
ECF Veteran
Verified Member
Jul 12, 2011
1,229
944
Vancouver, Canada
Oh yeah, before I forget again I wanted to mention that I am not playing with the voltage display anymore, I am just going to leave it plain as I have not found anything that would dim the brightness well. Guess you can always use it as a emergency flashlight, heh.

Or anyone can just get some tint film, cut it to fit, and attach it on the screen... easy job for anyone. I'm starting to actually like what you did on this LED. I didn't like it much at first, but now I think it looks pretty cool.

It kinda looks like some mystic black stone that numbers just appear on out of nowhere. :D
It doesn't look like there's any kind of light source behind it, and when the numbers lit it looks somewhat ancient with this texture. I like that.

2011-08-2315-22-15139.jpg


It's actually darker than the photo in reality.
If I get another cutlass I'll probably ask you to do this on LED again... or just do it myself when I get it.
 
Last edited:

Capt' Brian

Unregistered Supplier
ECF Veteran
Or anyone can just get some tint film, cut it to fit, and attach it on the screen... easy job for anyone. I'm starting to actually like what you did on this LED. I didn't like it much at first, but now I think it looks pretty cool.

It kinda looks like some mystic black stone that numbers just appear on out of nowhere. :D
It doesn't look like there's any kind of light source behind it, and when the numbers lit it looks somewhat ancient with this texture. I like that.

2011-08-2315-22-15139.jpg


It's actually darker than the photo in reality.
If I get another cutlass I'll probably ask you to do this on LED again... or just do it myself when I get it.

It came out kind of hit or miss tho, some were too thick and blotchy. Nah, think I'll leave it to the owners to play with that aspect of their ladies.
 

Friend of Atlas

Super Member
ECF Veteran
Verified Member
Oct 20, 2010
551
93
CT
Avast. I am closing pre-orders for this batch and getting everything in order to start working on them. I actually took a few more than I had planned on so time to get to work on them :)

So I guess that means it time to wait for THE MAILMAN:



Sorry - couldn't help myself. A friend posted it in another thread and it was too funny to pass up using it somewhere......
 

chet

Ultra Member
ECF Veteran
Verified Member
Jul 12, 2011
1,229
944
Vancouver, Canada
Evening all, Bumping Red Sky back to the top of list... Still looking into chargers, what does everyone think of the Trustfire TR003? TrustFire TR-003P4 Charger

looks great to me.


Avast me 'earties, batten down the hatches, stand by for heavy seas!

Were starting to get hit by the edge of hurricane Irene here, if i go quiet for a while it might just be we lost power or something.

Hope you'll be all fine captain.
 

pchela

Vaping Master
ECF Veteran
Verified Member
Nov 28, 2010
8,754
9,570
52
The only blue county in Texas!
Status
Not open for further replies.

Users who are viewing this thread