I use the same tanks. I got one of Cappy's first batch of Destroyers. It was a snug fit because of the design, but Cappy fixed it for mine and Hubby's, so they all fit perfectly. I was under the impression that he was going to modify the design from that point on so that the DCTanks would fit, no problem. Do you have one of the mahagony Destroyers from the 1st batch?
Red Sky Mods
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
ahhhhh... it would totally make sense if cherewine's destroyer is from the first batch.
mine is from later batch and I know cappy fixed that issue, so maybe I don't even need to worry then.
mine is from later batch and I know cappy fixed that issue, so maybe I don't even need to worry then.
Last edited:
The Destroyers do have a little bit more room to hold a slightly larger tank. I suppose the owners could carefully take a bit of sand paper to the inside of the tank hole to make it bigger. Fold some 120 or160 grit sandpaper into a 'U' shape around a dowel or your finger and have at it. Couldn't make it much bigger, but a bit....
Good morning crew!
I have a Destroyer on the road from me
wonder if the Cartomator xl and good to put
I have a Destroyer on the road from me
wonder if the Cartomator xl and good to put
martino, im pretty sure the cartomater is sopposed to work, thats the one from nhaler right?
on another note, usps said my destroyer should be here yesterday... but my prediction was correct, it got to baltimore, md last night at 11:36 pm, lol which means it will get to my town tomorrow morning, kinda sad i know the pattern of my tracking this well... so tomorrow you guys will have pictures of the destroyer! my j tanks get in today, so they wil be primed and ready to pop in and vape!!! has anyone ever had problems with red bull flavored liquid in a tank?
on another note, usps said my destroyer should be here yesterday... but my prediction was correct, it got to baltimore, md last night at 11:36 pm, lol which means it will get to my town tomorrow morning, kinda sad i know the pattern of my tracking this well... so tomorrow you guys will have pictures of the destroyer! my j tanks get in today, so they wil be primed and ready to pop in and vape!!! has anyone ever had problems with red bull flavored liquid in a tank?
Translation : " Martino , i think it will work . It is the one that nhaler.com sells , correct ? "
Ahoy, good morning all, arrr
Back to the tanks, the actual diameter of the tank hole is .78" to allow room for a .75" tank. This is as big as I could make them without sanding into the surrounding walls or making the mod bigger. There is no way I can make a mod big enough to handle the bigger tanks, or rather I don't want to even try, so I picked 3/4" as a good trade off for mod size and many of the most popular tanks on the market.
Back to the tanks, the actual diameter of the tank hole is .78" to allow room for a .75" tank. This is as big as I could make them without sanding into the surrounding walls or making the mod bigger. There is no way I can make a mod big enough to handle the bigger tanks, or rather I don't want to even try, so I picked 3/4" as a good trade off for mod size and many of the most popular tanks on the market.
The Smoktech DC tanks I got from Madvapes fit in my Destroyer fine. The first pic is a black Smoktech DC tank. The 2nd pic is a chrome one and the 3rd pic is one from Jewels co-op. They all fit in mine fine.
On the 1st batch of Destroyers, the bottom of the tank well, where the tank sits had a slight "U" shape. I sent mine back with a DCTank, and Cappy levelled it off for me. It appears that all of the Destroyers are now made a flat area for the tank to sit on.
Wishing the destroyer would be here today. Hehe. I'm sitting at work study. Basically I sit here and do nothing lol. J tanks should be here so I will have time to mess with them today. I got a fuel tank one ill put some connicide in it and see how it goes over night lol
Sent from my Transformer Prime TF201 using Tapatalk
Sent from my Transformer Prime TF201 using Tapatalk
yarrr, mine looks just like the Big Fran's so I'm sure the tanks would fit on mine too.
I'm planning on using boge cartos on those so I just bought a pipe cutter and practiced cutting on an unusable tube. I get nice clean cut, but it could be cleaner with a dowel I guess. I'll check home depot soon.
Thanks for the feedback everyone. My Destroyer is from Cappy's last batch (Redheart ones). I'll just try Cappy's suggestion about sanding the sides of the opening a bit. As he stated, there's not much room left for sanding, but I wouldn't need much, I don't think. I'll let you all know how it goes
UPDATE: I used my Dremel with a couple different sanding bits and took a wee bit from the hole but it was still a no-go. SO, I then proceeded to trim some of the sidewall off (on the button side) down inside as it appeared that the tank wasn't clearing it and it worked. So far, I have been able to use my Smoktech tanks that I bought from jewels!
Hope this will help those that may run into the same problem as I did
UPDATE: I used my Dremel with a couple different sanding bits and took a wee bit from the hole but it was still a no-go. SO, I then proceeded to trim some of the sidewall off (on the button side) down inside as it appeared that the tank wasn't clearing it and it worked. So far, I have been able to use my Smoktech tanks that I bought from jewels!
Hope this will help those that may run into the same problem as I did
Last edited:
Thanks for the feedback everyone. My Destroyer is from Cappy's last batch (Redheart ones). I'll just try Cappy's suggestion about sanding the sides of the opening a bit. As he stated, there's not much room left for sanding, but I wouldn't need much, I don't think. I'll let you all know how it goes
UPDATE: I used my Dremel with a couple different sanding bits and took a wee bit from the hole but it was still a no-go. SO, I then proceeded to trim some of the sidewall off (on the button side) down inside as it appeared that the tank wasn't clearing it and it worked. So far, I have been able to use my Smoktech tanks that I bought from jewels!
Awesome! You need to start a RSM modification/customization service methinks, arrrrr
p.s. swab a llittle 'Howards' on the inside and I bet it looks good as new.
- Status
Similar threads
