REO Family Photos & Storage Ideas III

[mwdenko]

You can just get the cap to fit your exsisting cyclone as well for $45



AFC (Air Flow Control) Top Cap - for Cyclone RBA - Cyclone Rebuildable Atomizer & Accessories

 

[super_X_drifter]

Ha, I did the same thing with the screws, those tiny set screws are a PIA.
Love my cyclone, I can get twice the vape between squonks.

Tiiiiimmmm . Funny you say that man. I haven't squonked in the last like 29 or so hits because my cyclone is auto feeding .

Filled the bottle a little more than recommend too before I bailed to this party but I'm also drinking coronas. Thank god for autocorrect.

Happy new year my brother

 

[james1980]

Sent my reo Grand back in to rob for some milling so I can use the afc on the cyclone cant wait for it to come back to me

 

[custom-classic]

You can just get the cap to fit your exsisting cyclone as well for $45



AFC (Air Flow Control) Top Cap - for Cyclone RBA - Cyclone Rebuildable Atomizer & Accessories

They've been out of stock there for a month or so...

 

[armyofskittles]

Sent my reo Grand back in to rob for some milling so I can use the afc on the cyclone cant wait for it to come back to me

How long does it take and how much

Sent from my HTC6500LVW using Tapatalk

 

[james1980]

Not sure how long it will take but he said it was going to cost $20

Sent from my ADR6425LVW using Tapatalk

 

[nerak]

How long does it take and how much

Sent from my HTC6500LVW using Tapatalk

Robert now has low profile Grands on site. They are $20 more than the standard Grand.

 

[bhamilton_930]

Robert now has low profile Grands on site. They are $20 more than the standard Grand.

oh does he now?

checking.... yup he does. oh minga! =)

 

[Un5tab1e]

Yep but, I think you still need to pm for an unmilled rm2 if u want one for it.

Sent from my HTC6500LVW using Tapatalk

 

[Sterno]

hmmmm low prof. that sounds interesting

 

[Big Hitter]

hmmmm low prof. that sounds interesting

I like to keep a low profile but its hard as heck when my REO is blowin like a steam train

Maybe a low profile REO should vape at 3.2v and come with a 3ohm carto ........ That might work.

 

[ltrainer]

My 3 year old (today) Reo Grand with its little brother...cross cut birdseye maple door, wenge back

 

[Commie]

My 3 year old (today) Reo Grand with its little brother...cross cut birdseye maple door, wenge back

I love that beaten but not broken Grand

 

[newyork13]

Hi Folks,

Soon as I take care of the Christmas bills and figure out what color, I'll be ordering a Grand. I'm coming from a different set up, so would appreciate some advice.
I'll certainly want to try the RM2, but I think also either cartomizers or atomizers. In order to get from what's orderable on the Reo page to something like this recent photo on your threadView attachment 292112

what would I need to get and what's the best place to get it?

Also, what else would you recommend for the first order?
PS Is the shiny one a mini, and what finish is it?
Thanks.

 

[super_X_drifter]

You have come to the right place

Congrats. Here's what I'd suggest:

REO grand (REOsmods.com) I think that one in the picture is raw aluminum.

RM2 (REOsmods.com)

Atleast 2 AW IMR 18650 batteries either 1600 or 2000 mah (you can get these at RTD vapor)

A charger - I'd recommend a Nitecore intellicharger i4 (you can get this at RTD vapor)

A couple of replacement springs for metal REOs (REOsmods.com)

A couple of short 1.7 ohm cartos (REOsmods.com)

A few feet of 30 ga and 28 ga Kanthal wire for your RM2 (REOsmods.com)

Head down to CVS and pick up a box of sterile rolled cotton in the bandage section for your RM2 wicks

That should cover it

 

[newyork13]

Hey thanks. Didn't expect a reply so soon, or so thorough.

Two other questions [for the moment anyhow]:
(I'm coming from the tank world) So, the cartos or atomizers just screw into the 510 connector and that's it?
And I just get anysort of drip tip that fits 510 and push it onto the top of the carto/atomizer?
Is there any broad concensus among you guys about carto vs. atomizer on the REO?

One thing still confuses me about the REO: what keeps it from leaking? It's important to me to have some device that I can throw into my jacket pocket when I'm out, and I've been reading that you folks do. I just don't get the technology that keeps the puddles out of the pockets.

thanks again

 

[super_X_drifter]

Thanks . Yep they just screw in. And yes, any drip tip for 510.

I think most of us agree that the RM2 is the best option.

The REO is leak free as long as you vape what you squonk and don't store it like upside down

You may want to start a thread here in REOvil with your questions and you are likely to get a dozen or more responses. This thread might not be the best one for maximum exposure

Here check this too:
http://youtu.be/WaDqS2kPLo0

 

[newyork13]

Terrific. I'm guessing the RM2 won't come with a prebuilt coil. I never built one, and know that I'm gonna want to start vaping the moment my stuff arrives.
So, with that in mind, between the cartos and the atomizers (Smokteck or Em-LR), any general agreement on which work better on the REO?
That was a very helpful video.
I'll wait for a new thread when I finally get the equipment.
Thanks again

Thanks . Yep they just screw in. And yes, any drip tip for 510.

I think most of us agree that the RM2 is the best option.

The REO is leak free as long as you vape what you squonk and don't store it like upside down

You may want to start a thread here in REOvil with your questions and you are likely to get a dozen or more responses. This thread might not be the best one for maximum exposure

Here check this too:
REO grand - Getting Started Tutorial - YouTube

 

[super_X_drifter]

My man, building an RBA is so much simpler than you imagine. Trust me, I'm a poster child of incompetence when it comes to anything like this and I excel at RBing As

I have a sticky thread above or below that takes you thru a photo step by step build.

Here's a couple of videos too
Basics:
http://youtu.be/OzKAz7gojEA

Coil build:
http://youtu.be/_XjH8lFurPk

You can do it and it's a game changer

I like the Stainless short 1.7 ohm cartos Rob sells but after using RBAS it's hard to use a carto

 

[james1980]

Just got my milled reo back from rob and its now perfect for my AFC cyclone dual coil .48 ohm setup love the AFC can set it up for my perfect draw of flavor and vapor don't see how it can get better , would love one of those brass shims to replace the stock firing pin.

Sent from my ADR6425LVW using Tapatalk