Is it me or does my hand shrink to make the mini fit just as well? Nice solid grip got from a might as well trade was hoping for a nickel.
REO Measurements, Parts, & Terminology
- Thread starter CJLite
- Start date
- th_trl_thread_readers 0
- Status
I could not find the measurements for or types of screws used in the REO's on this thread. Finally found a post by Mvgratz that listed the allen screw needing a .050 allen wrench. Thought it might help to list that here also.
Im gonna custom cut a little decal.
does anyone have the measurement for that space in red please.. =)
thanks!
does anyone have the measurement for that space in red please.. =)
thanks!
I went through this thread and copied the information I found. Thought I would put it here in one place.
Grand:
=====
Height: 3-3/4"
Width: 1-11/16"
Depth: 15/16"
Mini:
=====
Height: 3-1/8"
Width: 1-1/2"
Depth: 3/4"
Woodvil:
=====
3 13/16" tall without reservoir
1 1/16" deep
2 1/16" wide without switch
2 5/16" wide with switch
4 3/16" tall with reservoir
Woodvil after Feb, 2011:
=====
3 3/4" tall without reservoir
1" deep
2" wide without switch
2 1/4" wide with switch
4 1/8" tall with reservoir
Mini Woodvil:
=====
1 3/4" wide
3 1/16" tall without reservoir
7/8" deep
The Reo Grand with a full 6 ml bottle and an 18650 battery weighs 6.3 ounces.
And the mini fully loaded with 3ml bottle and 14500 batttery, atomizer and drip tip is 4.2oz
Batteries:
Original Wood,Grand & Woodvil : 18650
Mini & Mini Woodvil : 14500
Magnets for the REO Grand.
Gaussboys Super Magnets :: Discs :: 4mm x 1mm N48 Gold Plated Disc Magnet
Gaussboys Super Magnets :: Discs :: 4mm x 1mm N48 Gold Plated Disc Magnet
O-Ring Dimensions for Juice Bottles:
===========================
Mini & Mini Woodvil - #009 7/32" I.D. - 11/32 O.D. - 1/16" W Buna-N 70 O-Ring
009 B70 Buna-N 70 O-ring [B70009] : The O-ring Store - Where you can find a huge selection of o-rings, hydraulic seals, o-ring kits and accessories!, We make placing your o-ring order and getting o-rings as easy as possible! Get the o-ring seals you
Grand & Woodvil - #012 3/8" I.D. - 1/2" O.D. - 1/16" W Buna-N 70 O-Ring
012 B70 Buna-N 70 O-ring [B70012] : The O-ring Store - Where you can find a huge selection of o-rings, hydraulic seals, o-ring kits and accessories!, We make placing your o-ring order and getting o-rings as easy as possible! Get the o-ring seals you
If you ever go to a hydraulics shop to get one or more of these o-rings tell them that you need a
Hercules part number 568-012 for the grand and a 568-008 for the mini. These are kind of a
standard part number that most every shop can recognize!
Silicon Tubing Dimensions for Mini and Grand:
=================================
Grand & Mini - 1/16"ID x 1/8"OD 1/32" wall
Woodvil - 1/16 ID x 3/16 OD 1/16 wall
Tygon® Sanitary Silicone Tubing U.S. Plastic Corp. Tygon® Sanitary Silicone Tubing 3350 | U.S. Plastic Corp.
Post from Robert E. O'Neil on 10/02/11:
All reos wood or metal use this tubing one tubing for all. If someone breaks this tubing there doing something wrong
Tygon® Sanitary Silicone Tubing 1/16" ID x 3/16" OD with 1/16" Wall
Grand:
=====
Height: 3-3/4"
Width: 1-11/16"
Depth: 15/16"
Mini:
=====
Height: 3-1/8"
Width: 1-1/2"
Depth: 3/4"
Woodvil:
=====
3 13/16" tall without reservoir
1 1/16" deep
2 1/16" wide without switch
2 5/16" wide with switch
4 3/16" tall with reservoir
Woodvil after Feb, 2011:
=====
3 3/4" tall without reservoir
1" deep
2" wide without switch
2 1/4" wide with switch
4 1/8" tall with reservoir
Mini Woodvil:
=====
1 3/4" wide
3 1/16" tall without reservoir
7/8" deep
The Reo Grand with a full 6 ml bottle and an 18650 battery weighs 6.3 ounces.
And the mini fully loaded with 3ml bottle and 14500 batttery, atomizer and drip tip is 4.2oz
Batteries:
Original Wood,Grand & Woodvil : 18650
Mini & Mini Woodvil : 14500
Magnets for the REO Grand.
Gaussboys Super Magnets :: Discs :: 4mm x 1mm N48 Gold Plated Disc Magnet
Gaussboys Super Magnets :: Discs :: 4mm x 1mm N48 Gold Plated Disc Magnet
O-Ring Dimensions for Juice Bottles:
===========================
Mini & Mini Woodvil - #009 7/32" I.D. - 11/32 O.D. - 1/16" W Buna-N 70 O-Ring
009 B70 Buna-N 70 O-ring [B70009] : The O-ring Store - Where you can find a huge selection of o-rings, hydraulic seals, o-ring kits and accessories!, We make placing your o-ring order and getting o-rings as easy as possible! Get the o-ring seals you
Grand & Woodvil - #012 3/8" I.D. - 1/2" O.D. - 1/16" W Buna-N 70 O-Ring
012 B70 Buna-N 70 O-ring [B70012] : The O-ring Store - Where you can find a huge selection of o-rings, hydraulic seals, o-ring kits and accessories!, We make placing your o-ring order and getting o-rings as easy as possible! Get the o-ring seals you
If you ever go to a hydraulics shop to get one or more of these o-rings tell them that you need a
Hercules part number 568-012 for the grand and a 568-008 for the mini. These are kind of a
standard part number that most every shop can recognize!
Silicon Tubing Dimensions for Mini and Grand:
=================================
Grand & Mini - 1/16"ID x 1/8"OD 1/32" wall
Woodvil - 1/16 ID x 3/16 OD 1/16 wall
Tygon® Sanitary Silicone Tubing U.S. Plastic Corp. Tygon® Sanitary Silicone Tubing 3350 | U.S. Plastic Corp.
Post from Robert E. O'Neil on 10/02/11:
All reos wood or metal use this tubing one tubing for all. If someone breaks this tubing there doing something wrong
Tygon® Sanitary Silicone Tubing 1/16" ID x 3/16" OD with 1/16" Wall
Last edited:
Karen, this latest run of Woodvil's are smaller than the previous Woodvil's. Here are the exact dimensions of my Lace.
3 3/4" tall without reservoir
1" deep
2" wide without switch
2 1/4" wide with switch
4 1/8" tall with reservoir
Only a tiny bit of difference smaller than my jatoba/zebra wood from Feb. While the "outside" width dimensions are almost the same, the inside is "tighter". You can really tell the difference with the doors off of it and look at the ~1/8th inch gap between the bottle and the battery in the Feb run. There is no gap at all with this new one. The batt and bottle are snug against each other.
I REALLY like this new one ALOT! It actually feels better and a skosh smaller in the hand.
3 3/4" tall without reservoir
1" deep
2" wide without switch
2 1/4" wide with switch
4 1/8" tall with reservoir
Only a tiny bit of difference smaller than my jatoba/zebra wood from Feb. While the "outside" width dimensions are almost the same, the inside is "tighter". You can really tell the difference with the doors off of it and look at the ~1/8th inch gap between the bottle and the battery in the Feb run. There is no gap at all with this new one. The batt and bottle are snug against each other.
I REALLY like this new one ALOT! It actually feels better and a skosh smaller in the hand.
Wow, that is cool. I guess there are differences! I checked my 6 and didn't notice a difference really. I think all of mine might be from after Feb. Bottle and battery touch or just a hair between them.
Since these are constantly refined...the wood sizes do change. I'm considering making a disclaimer about that now. 
The allen head screw on the bottom of the Grand and Mini is a .050 size. That is the size wrench you will need if taking out the screw to replace the spring.
All reos wood or metal use this tubing one tubing for all. If someone breaks this tubing there doing something wrong 
Tygon® Sanitary Silicone Tubing 1/16" ID x 3/16" OD with 1/16" Wall
Tygon® Sanitary Silicone Tubing 1/16" ID x 3/16" OD with 1/16" Wall
For 6V vaping on the Grand and Woodvil you can use two of these batteries: AW LiFePO4 RCR 123
You will need one of these chargers: Ultrafire WF-188 Lithium Battery Charger or: Ultrafire WF-138a
Here is a great thread with a lot of information on 6V vaping on the Grand and Woodvil: http://www.e-cigarette-forum.com/forum/reos-mods/224790-its-all-tims-fault.html
For 6V vaping in the Mini you can use two of these batteries: Ultra IFR 14250 LFP 3.2v Rechargeable Batteries-Pair: Your source for the best electronic cigarettes / personal vaporizers in the world.
Here is a great thread with lots of information on 6V on the Mini: http://www.e-cigarette-forum.com/forum/reos-mods/196139-6volt-reo-mini.html
For 5V vaping on the Grand you can use these batteries: 4.8V NiMH 600mah Battery
You will need this Charger: 4.8V NiMH Battery Charger
Here is a great thread with lots of information on 5V on the Grand: http://www.e-cigarette-forum.com/forum/reos-mods/198476-reo-5v.html
You will need one of these chargers: Ultrafire WF-188 Lithium Battery Charger or: Ultrafire WF-138a
Here is a great thread with a lot of information on 6V vaping on the Grand and Woodvil: http://www.e-cigarette-forum.com/forum/reos-mods/224790-its-all-tims-fault.html
For 6V vaping in the Mini you can use two of these batteries: Ultra IFR 14250 LFP 3.2v Rechargeable Batteries-Pair: Your source for the best electronic cigarettes / personal vaporizers in the world.
Here is a great thread with lots of information on 6V on the Mini: http://www.e-cigarette-forum.com/forum/reos-mods/196139-6volt-reo-mini.html
For 5V vaping on the Grand you can use these batteries: 4.8V NiMH 600mah Battery
You will need this Charger: 4.8V NiMH Battery Charger
Here is a great thread with lots of information on 5V on the Grand: http://www.e-cigarette-forum.com/forum/reos-mods/198476-reo-5v.html
Last edited:
Something Redeyedancer (Robert) posted on another thread:
"11/64 for the new tubes if you have & older reo you will need a 7/64 drill bit"
This was in response to a question about the hole in the bottle cap. It is the size drill bit needed for the hole if replacing the cap.
"11/64 for the new tubes if you have & older reo you will need a 7/64 drill bit"
This was in response to a question about the hole in the bottle cap. It is the size drill bit needed for the hole if replacing the cap.
Since these are constantly refined...the wood sizes do change. I'm considering making a disclaimer about that now.
Good idea. Thanks. All of my Woodvils are different outside dimentions. The Woodys seem a bit closer in sizes.
Alice
when it comes to 18650 batts.. should i go with 2400 mah or 3000 mah? im looking at this ultrafire charger/battery kit. good brand?? KIT: TL-100 Universal Li-Ion 18650 Battery Charger + 2 18650 Batteries!
The recommended battery is AW IMR 18650 3.7V @ 1600 mAh. Battery length is very important. The spring will collapse in case of a short. If the battery is too long the spring is compressed so much that it has no room to collapse. During a short if the battery can not drop away from the firing point you could face further damage to your REO.
The batteries with higher mAh are longer.
I can tell you from experience that you can put one of those 3000mah jobs in a Grand, but it mashes the spring absolutely flat, which takes away the safety function of the collapsing spring (which breaks the circuit when things get ugly). Not worth it, in my estimation.
- Status
Similar threads
