Check this thread brother:
RM2 / RBA 2.0 / Reomizer 2 Rebuild Tutorial
http://www.e-cigarette-forum.com/forum/showpost.php?p=9421933
A tutorial for building the RM2
RM2 Wick & Coil Setups
- Thread starter super_X_drifter
- Start date
- th_trl_thread_readers 0
- Status
Check this thread brother:
RM2 / RBA 2.0 / Reomizer 2 Rebuild Tutorial
http://www.e-cigarette-forum.com/forum/showpost.php?p=9421933
A tutorial for building the RM2
Jan, you are awesome! How bout I take you up on that but you gotta let me send you some eKowool and some Nextel? I'll have the Nextel next week, so when it comes, I'll send ya both?
Thank you.
That would be great! I'm wanting to try it. I'll share with Ratman.......we both want to try it.
If you're familiar with using ss mesh, I would continue to use it. On the RM2 you can have it touch the ceramic floor but nothing else thats metal if the mesh is not oxidized well. Meter before using
My new orange and black REO GRAND. It makes me feel like a new kid again
Sent from my iPhone using Tapatalk
Check this thread brother:
RM2 / RBA 2.0 / Reomizer 2 Rebuild Tutorial
http://www.e-cigarette-forum.com/forum/showpost.php?p=9421933
A tutorial for building the RM2
That's the thread I was looking at, but the pics arn't showing me anything. Even on the laptop.
Also a bit confused about the "Micro coil". Guess its just gonna be a bit of effort and research to get this done right.
I've got this silica and would really like to use it. (I think).
I know the folks here will pull me through. (You all always do).
Off to work now. Have a wonderful day all. Oklahoma is getting another round of storms. Like we really need it right now.
Sent from my iPhone using Tapatalk
Torching ekowool before doing anything definitely helps keep it from fraying when you cut it. I have limited experience with this stuff but when I didn't torch it first, I couldn't get rid of that silica taste even after the first bottle vaped. Torching solved it. Ekowool also survives being in an RBA a lot better. I'm at the tail of my second week one one of my VVGs and its still going strong. (And that's in a ERA)
When I first got my RM2's my initial impression was it was too airy a draw for me, so I set them down. After reading through a majority of this thread I decided to give ekowool a shot in one if them. I don't know what the difference is but no more airy draw and its hitting better than the ERA. The flavor is also really, really good too. So far, I give a thumbs up to ekowool until I have time to find something else to fiddle with.
Thanks for all the info you guys share. It sure makes getting the best vape out of our REO's a lot easier!
Sent from my iPhone using Tapatalk 2
My new orange and black REO GRAND. It makes me feel like a new kid again
Sent from my iPhone using Tapatalk
Nice color combo guy and the RG is a sweet device.
Also happens to be the college colors for OSU. Not a big fan but both nephews and one niece went there. So guess that's why I names her Poke. Short for cowpokes. Lol
Sent from my iPhone using Tapatalk
This is not a RM2 but it would work on one. I took a small piece of ceramic wick. Had a bunch of small pieces cause every time I tried to use one it broke. I wrapped my coil on it with 28 gauge wire. It is a 1/32 in ceramic wick. It measures .8 ohms. My camera won't focus in well enough to take a picture. It seems to be wicking well. Since the A7 has a drip well I put a piece of cotton on one side to wick the juice in the drip well up to the ceramic wick. Finally a use for all those broken ceramic wicks.
Finally got a silica wick done for one of the new Reomizers.
Have no idea of how many wraps, but ohmed out at 1.6. Just perfect for what I was after.
The mesh not so good. 1.1 ohm but I'm shooting for the 1.5-1.7 range. Used 30 guage kanthal for both. The silica wick is a doubled 2.5mm. No pics cause can't get a good pic of either.
Have no idea of how many wraps, but ohmed out at 1.6. Just perfect for what I was after.
The mesh not so good. 1.1 ohm but I'm shooting for the 1.5-1.7 range. Used 30 guage kanthal for both. The silica wick is a doubled 2.5mm. No pics cause can't get a good pic of either.
I'm using silica wick atm, close to a month with no dry burns needed, it seems to just keep going. Still getting excellent flavor and vapor. Mine is around 1.8 ohms. I'm curious how its doing for you.
If I could just see the holes in the post it would be a lot better. Even when I get a dry burn, it doesn't seem to matter. Just squank and vape on.
Same here, it's really hard to flood, and dry hits just need a good squonk to keep on truckin'
I had trouble with seeing RBA's at first too, even got a lighted magnifyer, but I found all I really need is lots of LIGHT and I can manage just fine. Especially if I can only rebuild once a month LOL
daylight is a very good source of light for rebuilding. I rebuild in my garagemahal and always end up outside using the daylight to help me...
who knew??
who knew??
I was doing pinhole photography for bit and was amazed to learn the immense diff. btwn daylight and artificial. I can open the shutter for 40 sec. outside VS. inside w/ 3 serious photographer's light bulbs (like, 200 watt or something ea.) it takes an hour!
edit: I know I'm getting seriously tangential there; but "yay daylight"
edit: I know I'm getting seriously tangential there; but "yay daylight"
Yea I always try and use a light colored background when I'm trying to see the holes.
took silica, wrapped ss mesh over it, then wrapped some strands of bamboo over the mesh, then wrapped my 28g. holds like 10 drops, i can let it rock for 30+seconds no red coils. still lovin my rm2
Last edited:
Well my 29 gauge wire came in. 6 wraps makes a perfect 1.3ohm coil. Not sure if i will be going back to 32 gauge. The 29 is so much easier to work with due to it being stiffer. Did a 5 wrap and it was right at 1ohm. I think that this is my sweet spot.
- Status
Similar threads
