S&S MODS now open

[Chopper71]

Hey all its me and its okay about the party really.Her birthday is next weekend,this is just her party for her and her friends.We will do something as a family on her actual day.Just taking a break my .... has grown roots into my kitchen chair lol.Sorry Karla I couldn't get you any sooner.Yes 400 mesh for PG,straight VG I would use 325.I don't have anymore of the 325 sorry people.Also the pre fill holes are no longer there.I used them for the post to go through as it was faster for me then to try and make the holes.As sj74 said in a earlier post,you just stick the syringe down in the wick hole that the wick is in and fill.I did and its really much faster then trying to guide a needle into those small holes.I got my smok VMaxx today and that is one bad boy.It hits like a crazy man.It floored me on 4.0....3.7 is almost too much as well.I have an announcement I will be posting in a few.The Atom is something like the Genesis mini,only easier to take a part and clean and will come in different colors I hope.That part I'm working on now,meaning the place where I will buy the colored tubes.

 

[Chopper71]

defcon update..........................................................


The DefCon will no longer come with extra wicks on future orders.Only the one that is pre-installed.I will however send 3 pieces of mesh to make your own.The reason being its just taking to much time to do all the wicks.Sorry to have to do this its just slowing me down way too much.Everyone that has paid will get the extra wicks and for those who have paid for other extra wicks will get them as well.Please don't hate me as I hate to even do it.I'm struggling here bad to try and keep up.Once I get control of this and have a good working system I will go back to it so no worries and thank you all for the support.

 

[Chopper71]

sj74 thanks man for helping me out on here man its very much appreciated.

 

[sj74]

I will keep on keepin on for ya man. As long as you get some sleep, that is the deal

sj74 thanks man for helping me out on here man its very much appreciated.

 

[Chopper71]

I will keep on keepin on for ya man. As long as you get some sleep, that is the deal

LOL okay pops....really I'm good I will work through out tonight and tomorrow,then Monday is my off day lol.Mondays and me don't mix very well together oil and vinegar.Scott I want to run something by you in a PM later tonight or the morning.

 

[Chopper71]

Okay so the bad news is out of the bag about the wicks and once again I do apologize for this.Please remember all that has ordered up to this point WILL get your wicks.

 

[mhart032]

Chopper, you dont have to send any extra with mine. i have 2 sheets of 325 from mcallisters, and a roll of the xc-116 and 150ft of kanthal. so if it saves ya some cash dont worry about it. unless its already shipped. lol
thanks
Matt

 

[sj74]

LOL okay pops....really I'm good I will work through out tonight and tomorrow,then Monday is my off day lol.Mondays and me don't mix very well together oil and vinegar.Scott I want to run something by you in a PM later tonight or the morning.

Sure thing Chopper, We will sync up tomorrow for sure...Wife and Dog out cold on the cough, think it is time for everyone to get some sleep....lol

 

[Chopper71]

Hi everyone S&S Mods are now open for business.I'm starting this very small and hope to have it grow with more mods and things.Right now I'm just selling my version of a rebuild able atty named the DefCon.I'm sure some have seen the similar ones floating around.Mine are all hand made at my home by myself.I will be taking small orders of 10 at a time.These are made to order,so when you order one and pay I will then make it and ship when its complete.These are very nice units and work very well.They are made of Stainless Steel and I use .999 pure sterling silver for the electrodes along with either 400 or 325 Stainless Steel mesh and Kanthal A 32 awg Resistance Heating Wire.The DefCon can hold approximately 3.5ml of liquid and has been tested for leaks with no evidence of any.Right now I have two different types,Black and Stainless and I can also add a Blue Led light if wanted.I will have more color choices at a later date and other color of LED lights as well.It will come to you fully ready to just add juice and vape.

I'm currently working on something I call the DefCon Atom which I hope will make it through all the testing.I will put up temporary pictures of the DefCon now,but will post better ones later today.

Price for the DefCon is $55 shipped and comes with a 510 drip tip of my choice two extra pre oxidized wicks and some of the Kanthal wire.
For a extra $2 you can have a LED light installed.I only can accept PayPal right now with no mention of Ecig related stuff.I will offer a 10 day money back
guarantee or a replacement if anything should happen to the DefCon as a result of the way its built.Orders are to be taken by PM only and please use the word DefCon in the subject box.It's my wish to make you all a low cost rebuild able atty that works very well and looks nice to boot.If I have left anything out please inform me and I will fix it.Thank you and take care.

defcon update............................................ ..............


The DefCon will no longer come with extra wicks on future orders.Only the one that is pre-installed.I will however send 3 pieces of mesh to make your own.The reason being its just taking to much time to do all the wicks.Sorry to have to do this its just slowing me down way too much.Everyone that has paid will get the extra wicks and for those who have paid for other extra wicks will get them as well.Please don't hate me as I hate to even do it.I'm struggling here bad to try and keep up.Once I get control of this and have a good working system I will go back to it so no worries and thank you all for the support.

 

[BrandonSi]

don't worry about extra wicks, man.. once you've made them, they take like 7-8 minutes to bust out a new one.. for us, that's not bad, since we use one at a time.. for you, making 10-20 at a time, it's a huge waste of time..

 

[Chopper71]

Hi everyone S&S Mods are now open for business.I'm starting this very small and hope to have it grow with more mods and things.Right now I'm just selling my version of a rebuild able atty named the DefCon.I'm sure some have seen the similar ones floating around.Mine are all hand made at my home by myself.These are made to order,so when you order one and pay I will then make it and ship when its complete.These are very nice units and work very well.They are made of Stainless Steel and I use .999 pure sterling silver for the electrodes along with mesh #400 and Kanthal 32 awg Resistance Heating Wire.The DefCon can hold approximately 3.5ml of liquid and has been tested for leaks with no evidence of any.Right now I have two different types,Black and Stainless and I can also add a Blue Led light if wanted.I will have more color choices at a later date and other color of LED lights as well.It will come to you fully ready to just add juice and vape.

I'm currently working on something I call the DefCon Atom which I hope will make it through all the testing.

Price for the DefCon is $55 shipped and comes with a 510 drip tip of my choice one pre installed oxidized wick,3 pieces of 400 mesh to make 3 wicks and some Kanthal wire 32 awg.
For a extra $2 you can have a LED light installed.I only can accept PayPal right now with no mention of Ecig related stuff.I will offer a 10 day money back
guarantee or a replacement if anything should happen to the DefCon as a result of the way its built.Orders are to be taken by PM only and please use the word DefCon in the subject box.Also include your ECF user name and color choice.It's my wish to make you all a low cost rebuild able atty that works very well and looks nice to boot.If I have left anything out please inform me and I will fix it.Thank you and take care.

 

[Chopper71]

hi everyone s&s mods are now open for business.i'm starting this very small and hope to have it grow with more mods and things.right now i'm just selling my version of a rebuild able atty named the defcon.i'm sure some have seen the similar ones floating around.mine are all hand made at my home by myself.these are made to order,so when you order one and pay i will then make it and ship when its complete.these are very nice units and work very well.they are made of stainless steel and i use .999 pure sterling silver for the electrodes along with mesh #400 and kanthal 32 awg resistance heating wire.the defcon can hold approximately 3.5ml of liquid and has been tested for leaks with no evidence of any.right now i have two different types,black and stainless and i can also add a blue led light if wanted.i will have more color choices at a later date and other color of led lights as well.it will come to you fully ready to just add juice and vape.

I'm currently working on something i call the defcon atom which i hope will make it through all the testing.i will put up temporary pictures of the defcon now,but will post better ones later today.

Price for the defcon is $55 shipped and comes with a 510 drip tip of my choice one pre installed oxidized wick,3 pieces of 400 mesh to make 3 wicks and some kanthal wire 32 awg.
For a extra $2 you can have a led light installed.i only can accept paypal right now with no mention of ecig related stuff.i will offer a 10 day money back
guarantee or a replacement if anything should happen to the defcon as a result of the way its built.orders are to be taken by pm only and please use the word defcon in the subject box.also include your ecf user name and color choice.it's my wish to make you all a low cost rebuild able atty that works very well and looks nice to boot.if i have left anything out please inform me and i will fix it.thank you and take care.

......................................good morning..........................................

 

[Chopper71]

What??????????????? Where are the pictures?????????????????

 

[tj98_7]

Great new pics chopper. I am drooling already.

 

[sj74]

New pics are awesome!!!!

 

[Chopper71]

Hi everyone S&S Mods are now open for business.I'm starting this very small and hope to have it grow with more mods and things.Right now I'm just selling my version of a rebuild able atty named the DefCon.I'm sure some have seen the similar ones floating around.Mine are all hand made at my home by myself.These are made to order,so when you order one and pay I will then make it and ship when its complete.These are very nice units and work very well.They are made of Stainless Steel and I use .999 pure sterling silver for the electrodes along with mesh #400 and Kanthal 32 awg Resistance Heating Wire.The DefCon can hold approximately 3.5ml of liquid and has been tested for leaks with no evidence of any.Right now I have two different types,Black and Stainless and I can also add a Blue Led light if wanted.I will have more color choices at a later date and other color of LED lights as well.It will come to you fully ready to just add juice and vape.

I'm currently working on something I call the DefCon Atom which I hope will make it through all the testing.

Price for the DefCon is $55 shipped and comes with a 510 drip tip of my choice one pre installed oxidized wick,3 pieces of 400 mesh to make 3 wicks and some Kanthal wire 32 awg.
For a extra $2 you can have a LED light installed.I only can accept PayPal right now with no mention of Ecig related stuff.I will offer a 10 day money back
guarantee or a replacement if anything should happen to the DefCon as a result of the way its built.Orders are to be taken by PM only and please use the word DefCon in the subject box.Also include your ECF user name and color choice.It's my wish to make you all a low cost rebuild able atty that works very well and looks nice to boot.If I have left anything out please inform me and I will fix it.Thank you and take care.

 

[Chopper71]

Thank you for the comments about the new pictures.Ive been up working on labels for the juice and they are pretty cool looking.Got my BACK OFF I'M GRUMPY avatar picture on the label along with flavor,mg and mix ratio.

 

[kwalka]

Those are pretty thick wicks. The Biohazard logo Rocks! I'm getting excited.

 

[tiburonfirst]

What??????????????? Where are the pictures?????????????????

never mind those!!!! i wanna see the mini!


seriously though - since i do not use more than 1 to 2ml of juice per day my favorite tank size is just about 2ml .......

 

[kwalka]

Chopper I thought you would appreciate this. My wife got this for me years ago.




Happy Sunday my fellow DefConians.