Put the o rings into the tank. The big clear ones. See my posts from yesterday.
Your wicking isn't right. Cut it just a tiny bit past the base so a little is in the side wick channels.
Squape Reloaded Clone
- Thread starter yungstu
- Start date
- th_trl_thread_readers 0
- Status
Put the o rings into the tank. The big clear ones. See my posts from yesterday.
Your wicking isn't right. Cut it just a tiny bit past the base so a little is in the side wick channels.
I agree It's quite a nice atty If it works I'm loving mine
I'm in Canada and they don't ship here or I would chance another for that price
If you want it that badly I'll repost it to you if you pay the shipping
. I do this all the time for my Canadian motorcycle friends. Just bear in mind shipping even from the US to Canada costs more than it should, but this could go in a padded envelope.
Thats Really nice of you Thanks FT has them again to with the glass window. I think I will just consider my self lucky and stick with the one I got
Thanks Again
FT has them again to with the glass window. I think I will just consider my self lucky and stick with the one I got Thanks Again
If you want it that badly I'll repost it to you if you pay the shipping
Thats Really nice of you Thanks
Thanks Again
I was thinking it would be more worth it if you bought 2, or more than one item
I just got my squape r clone, you guys have me scared to even try it! 
going to sit down w/ a beer and read through 87 pages now 
going to sit down w/ a beer and read through 87 pages now I wish Ehpro would hurry and release other decks. Their Squape R has been bombproof and has (from what I can see side by side to legit) real ematal coating on the chimney and deck. The fact that it only comes with the "S" deck is the only thing that makes me sad about it.
do you know which clone 'brand' this one is? I won it in a raffle, so I'm not sure where it's from... thanks guys!
Now the Kingtu is sitting in front of me. Thank you, Pete
Going into the bath and then I'll give him a whirl. It feels like it has a glass tank. I sure hope the o rings are in.
Going into the bath and then I'll give him a whirl. It feels like it has a glass tank. I sure hope the o rings are in.
oh jeez.. I should just use it as a paperweight then..
No, a couple people got good ones. Give it a try
. Make sure the clear o rings are in the tank first.
This is what I'm seeing so far on the kingtu compared to the Ivogo:
1. Kingtu has a glass tank and the o rings are in. Ivogo has plastic and I had to put in the o rings.
2. Kingtu's deck is sturdy. Ivogo's is wobbly.
3. Kingtu's posts are sturdy. I had to use vise grips to tighten the positive post of the Ivogo.
4. Anondizing looks better on the Kingtu.
Now to build it and see what happens.
1. Kingtu has a glass tank and the o rings are in. Ivogo has plastic and I had to put in the o rings.
2. Kingtu's deck is sturdy. Ivogo's is wobbly.
3. Kingtu's posts are sturdy. I had to use vise grips to tighten the positive post of the Ivogo.
4. Anondizing looks better on the Kingtu.
Now to build it and see what happens.
After swearing off any more involvement with my Ivogo SqR, I couldn't resist its demonic hold over me. Decided to put the replacement 510 pin from Focal in it, double o-ringed and... it's been working like a champ for a couple of days. I'm sure it will go schizo on me again but, man, when this thing works it is hard to put down.
That o-ring up there only seems impossible to fit in if there's already one in there. That was the mistake I made, and ended up cussing at it for about an hour. They're really hard to see or feel. Why they didn't just put red ones in there...All I really needed to do was just push the insert a little farther in and twist it around in there to make sure the o-rings were properly seated, instead of messing around with the o-ring that I thought was missing.
One way to see where the leak is is to fill the tank with water and leave it upside down for a few minutes. If it's leaking from the triangles, then you'd know for sure that it's the tank o-rings. You'd even be able to tell if it's the top one or bottom one. Another place it could leak at is where the chimney screws into the top cap. Then it would leak at the drip tip hole. I put teflon tape on the chimney threads on mine.
This was very helpful information and I'll test this when I get home. If there were just a way for me to get the glass tank out I'd know if there were any orings in there. I can't feel or see them either but they could be in there.
No, a couple people got good ones. Give it a try
I took out the plastic tank, and the o-rings are in there
Going to try it out as soon as I can get these babies down for a nap..
OMG! The Kingtu works! Out of the box! The decks even snap in perfectly like they are supposed to!
Chuckie is retired. He will be for parts if needed
Chuckie is retired. He will be for parts if needed
Hello
i wanna thank every beta tester alias clone developer.
am now trough the 89 pages of this topic hehehe.
and i think i go drive tomorow 2 times 45 min to buy a origenal squape reloaded .
i saw so many people got problems with the clones.
and some even do so much effort drilling ,making plates,for underneath, isolate the poles ,new screws,new centerpin.
i think some times by myzelf why they not make a squape reloaded all by them zelf ???
if you do so much effort heheehehe.
ok conclusion: chinese can clone the shape ,the looks, even the box but the swiss precision is stil missing hehehehe
it whas so funny to read ,people hear the sound already of jaws ta ta ta ta ta
some people even have named him chucky
first he not wanna play
then he wanna play
then he not wanna play any more
i saw the people who get it to work loved it very much and even decide to buy origenal.
i wanna thank again every one .
i not go for a clone and do all effort i go right away for the real thing
thx thxxx
i wanna thank every beta tester alias clone developer.
am now trough the 89 pages of this topic hehehe.
and i think i go drive tomorow 2 times 45 min to buy a origenal squape reloaded .
i saw so many people got problems with the clones.
and some even do so much effort drilling ,making plates,for underneath, isolate the poles ,new screws,new centerpin.
i think some times by myzelf why they not make a squape reloaded all by them zelf ???
if you do so much effort heheehehe.
ok conclusion: chinese can clone the shape ,the looks, even the box but the swiss precision is stil missing hehehehe
it whas so funny to read ,people hear the sound already of jaws ta ta ta ta ta
some people even have named him chucky
first he not wanna play
then he wanna play
then he not wanna play any more
i saw the people who get it to work loved it very much and even decide to buy origenal.
i wanna thank again every one .
i not go for a clone and do all effort i go right away for the real thing
thx thxxx
- Status
Similar threads
