I'm very happy with my Squape from Focale and the one from Gvapers is on his way to the Netherlands, hopefully mine doesn't leak.
Squape Reloaded Clone
- Thread starter yungstu
- Start date
- th_trl_thread_readers 0
- Status
I got mine from gvapers not happy at all. Just shorting out. Can't even use it. Gvapers us selling the same one that fastech has.
Just shows the crappy QC. Mine from G Vapers is excellent. Sounds like some good some bad.
Ordered the one listed above, got it in today, been using it about 6 hours, easy to build, no leaks, quality is good. Pretty sure it is a glass tank (been fooled before) and it has O-rings not glued.
Happy with it so far.
Good to hear someone got a good SQr with glass and o-rings. That e-bay listing didn't say what decks were included.
I'm interested in how this piece compares with the original Squape. I've perfected building the correct wick size/shape to prevent leakage, so other than the fact that the Squape v1 weighs a brick, I'd wonder how much motivation I'd have to follow up. So far, the sequel is still looking goofy, just marginally beating the "spaceship look" of my current EhPro piece. 
Alright y'all... G Vapers emailed me tonight with a couple of quick, easy fixes to the issues! The leaking issue is solved by making sure the tank section is firmly seated. Duh, right? I didn't think of it though. OK, no more leaking! The shorting issue was caused by the post's threads and the 510 connection threads being coated with ematel. Just work the threads in and out until it's gone. Problem solved! I feel like a real douche. But there ya go!
G vapers is saying that it's ematal coating on the threads. All you have to do is screw and unscrew the post and pins until the ematal coating comes off.
For some reason mine came with a frickin plastic tank, its held in by o-rings though. I contacted the seller about getting a replacement tank.
I'm still not able to get the eBay clone to fire the coil. Not exactly sure why. Initially this is the one that would fire a coil.
Check everything for the coating where it does belong. It is causing shorts and no firing.
It is actually not a shorting problem.There was no continuity between the positive post and the 510 pin.My builds would not fire or register on the ohm meter.I grabbed my fluke multimeter and started digging for the problem.This was my second squape r dud this week,there was no way I was not going to vape the squape last night.But once I fixed that the positve 510 pin caused a dead short and got my mod smoking hot.It actually burnt the pin and melted the tiny o-ring.It was in too far and touching the side of the 510 causing a dead short. Now it is working like a champ now. There is a .9 coil in it pouring out the vapor and flavor.I was initially disappointed with gvapers but James quickly responded to every email sent.You can tell he actually cares.
Pretty much.If you have a meter check continuity between the two threaded holes in the base.If not there is probably coating on the base threads.If you do there is gunk on the post threads.Just keep playing with it until your meter rings out between the 510 pin to the positive post screw.
Just ordered this one from FT. Glass and 3 decks, with and w/out logo. $24.70 free shipping
I got the EHPro one, it works pretty well but I do get a dry hit every here and there, not sure if I'm wicking it right. I'm just putting short tails on the vertical channels about 1/4th of the way down..
- Status
Similar threads
