SvoёMesto KAYFUN 4

[raitizz]

For you sub-ohm tank enthusiasts, yet another has hit the market, the Heatvape Sniper, if you didn't know already
Top-filling, top-air inlets.....


"Vape storm!!!"

R

 

[dems86]

So InTaste already created my shipping label and (according to the FedEx website) I'm supposed to get that tomorrow. I'll believe that when I see it because as you all know, I just ordered YESTERDAY! I'm hoping for Friday.

Good turn around times for both ProVape and InTaste! (Ordered a Provari P3 LATE Friday night and it's currently showing as "sorting complete" at my local post office. Not bad.)

Too bad I'm stuck at work. And my retired mother is at my house babysitting my daughter and has been put on "high alert" to watch for a "vapackage" to sign for!




-Sent via Tapatalk

Everytime i order from InTaste, the initial estimate from FedEx is like the next day.

Like clockwork though, assuming you don't hit weekends or holidays, it's always on the third day (2 nights). It's awesome how fast products get here, almost always they will beat out products by way of USPS going from Lid Angeles to Sacramento *facepalm*

Congrats on the purchase, you are definitely going to love it no matter what day it arrives

 

[Kaoself]

Looks like a re arranged Atlantis.

 

[ethermion]

Great! Yep looking forward to it! And I too love my EHPro Kayfun Lite Plus. Hoping for an even better experience from the KF4 (authentic this time obviously. Sorry I didn't mention that above... Haha)

On a related note is there anyone making a plain non threaded poly replacement for the glass section? My juice is easy on poly tanks and it would be nice to replace it with poly so as to be less prone to breakage.

Just a thought. I know I'm going to at least drop this sucker a couple times when getting up from the couch and forgetting that my mod is on my chest! Haha. I try not to, but it's inevitable...


-Sent via Tapatalk

I would not fret too much about the glass. The bulging top and bottom help to protect. I had at one time three KFLs with SOV glass kits in rotation. Never lost one tank, and I am a complete klutz. Spectrum tanks has replacements in different colors for about the same price but cheap shipping.


Sent from my brain using An iPad

 

[Bronze]

Great! Yep looking forward to it! And I too love my EHPro Kayfun Lite Plus. Hoping for an even better experience from the KF4 (authentic this time obviously. Sorry I didn't mention that above... Haha)

On a related note is there anyone making a plain non threaded poly replacement for the glass section? My juice is easy on poly tanks and it would be nice to replace it with poly so as to be less prone to breakage.

Just a thought. I know I'm going to at least drop this sucker a couple times when getting up from the couch and forgetting that my mod is on my chest! Haha. I try not to, but it's inevitable...


-Sent via Tapatalk

I'm thinking Friday is more likely from inTaste as well. They have some kind of time warp over there and it seems you have to add a day from what they initially tell you. Making out a sticker and actually getting the product to move tend to have different starting times. Not sure if that is an inTaste thing or a FedEx thing.

 

[Poisontail]

Just got my second kayfun v4 with 4s kit and Chris mun bell cap!

 

[ethermion]

I'm thinking Friday is more likely from inTaste as well. They have some kind of time warp over there and it seems you have to add a day from what they initially tell you. Making out a sticker and actually getting the product to move tend to have different starting times. Not sure if that is an inTaste thing or a FedEx thing.

All the tracking info is from a FedEx web site. Not sure there is a mystery here.


Sent from my brain using An iPad

 

[ethermion]

Just got my second kayfun v4 with 4s kit and Chris mun bell cap!

I have two KF4s, and a 4s kit. I am clueless as to a Chris mun bell cap. Tell me more. I live to accessorize.


Sent from my brain using An iPad

 

[stanleybb50]

I would not fret too much about the glass. The bulging top and bottom help to protect. I had at one time three KFLs with SOV glass kits in rotation. Never lost one tank, and I am a complete klutz. Spectrum tanks has replacements in different colors for about the same price but cheap shipping.


Sent from my brain using An iPad

Good to hear! I actually already have extra glass in smoke and clear from Fasttech. Guess I was just worried about it falling right on the drip tip and that impact pushing up on the glass, but that would be my fault.

For the record the reason in thinking of this is because just yesterday, I was getting out of my slightly lifted 4Runner and my Provari 2.5 mini in 18490 mode and EHpro Kayfun Lite plus fell right off my lap directly down onto the drip tip (all impact straight down) and I just picked it up and cleaned off the tip and it didn't miss a beat.

Just got me thinking was all. I was impressed!

I'm thinking Friday is more likely from inTaste as well. They have some kind of time warp over there and it seems you have to add a day from what they initially tell you. Making out a sticker and actually getting the product to move tend to have different starting times. Not sure if that is an inTaste thing or a FedEx thing.

Haha yes u fully agree. Friday is my hope! And I'd put it on FedEx. Looks like it says it was picked up already in my case. They must have an afternoon pickup over there. I didn't look up the time difference - but I do know they're ahead of us.

Can't wait!


-Sent via Tapatalk

 

[Bronze]

All the tracking info is from a FedEx web site. Not sure there is a mystery here.


Sent from my brain using An iPad

InTaste can put a sticker on their box at 10PM but it wont get picked up till the next day. Yes, FedEx records it but just because they said the sticker is made out doesn't get the meter started.

 

[finagle69]

I finally got a V4 (tobeco) with the 4S kit. I'm able to run it upwards of 30 Watts with a 30/70 juice no problem, but the airflow is still a little too restrictive for a nice lung hit. I have a drill press and can just start going at it, but have others opened specific things up for better airflow?

 

[BNEAT]

I finally got a V4 (tobeco) with the 4S kit. I'm able to run it upwards of 30 Watts with a 30/70 juice no problem, but the airflow is still a little too restrictive for a nice lung hit. I have a drill press and can just start going at it, but have others opened specific things up for better airflow?

Not yet. I've been trying to get the juice flow to keep up at 30ish watts. When I do start on the air flow, I plan on attacking the small horizontal air holes in the bottom of the Center Post. The large vertical hole is as big is it can be without destroying the threads.

 

[Junny89]

Anyone got the new updated gold spring?
Just got mine yesterday from c9v. Going to install it later on a new build and see what difference it makes if any.

Sent from my Passport using Tapatalk

 

[Mtek]

Anyone got the new updated gold spring?
Just got mine yesterday from c9v. Going to install it later on a new build and see what difference it makes if any.

Sent from my Passport using Tapatalk

Please follow up with that, I'm curious to know if it will make the JC harder to manipulate. Most likely not, but I'd like to know what you think. Thx

 

[Junny89]

Please follow up with that, I'm curious to know if it will make the JC harder to manipulate. Most likely not, but I'd like to know what you think. Thx

Just thrown a new build on with the spring.
Straight away it's very very hard to screw the juice control. You can just hear the threads crunching and grinding.
Once you change the spring, you have to screw the base back on which is impossible until you screw the whole tank section back on and twist hard. It's opened up kinda now though.

It's probably made it worse as I'm having a poor vape. It's lacking quality. Think it could be my coil, so going to rebuild again as I'm having no joy at all.

Will keep u updated.

Sent from my Passport using Tapatalk

 

[finagle69]

Not yet. I've been trying to get the juice flow to keep up at 30ish watts. When I do start on the air flow, I plan on attacking the small horizontal air holes in the bottom of the Center Post. The large vertical hole is as big is it can be without destroying the threads.

Gotcha. I've got a set of simple numbered bits and a cheap drill press. I'll try to work on that this weekend. I'm thinking it's mainly those four exterior holes as well. I'm assuming it's not the 1mm holes on the center pin, as the bottom of it is completely open.

 

[Mtek]

Just thrown a new build on with the spring.
Straight away it's very very hard to screw the juice control. You can just hear the threads crunching and grinding.
Once you change the spring, you have to screw the base back on which is impossible until you screw the whole tank section back on and twist hard. It's opened up kinda now though.

It's probably made it worse as I'm having a poor vape. It's lacking quality. Think it could be my coil, so going to rebuild again as I'm having no joy at all.

Will keep u updated.

Sent from my Passport using Tapatalk

Thanks, I thought this may be the case. Perhaps it will break in. I know exactly what you are describing hearing the spring compress, the pos clone I used for reference to my auth made the same noise...the spring was noticeably stiffer too.

 

[BNEAT]

Gotcha. I've got a set of simple numbered bits and a cheap drill press. I'll try to work on that this weekend. I'm thinking it's mainly those four exterior holes as well. I'm assuming it's not the 1mm holes on the center pin, as the bottom of it is completely open.

You may be right, but the hole at the bottom of the Center Post is within .3mm (.012") of the 510 pin when JC is open, so it doesn't let much air through there. I'd like to know where the log-jam is, so post up what you figure out.

 

[Kaoself]

I'd think the 6 side air intake holes on the centre post would be the place to start. Looking at them though, it doesn't seem like they could be made much larger and still have the post retain enough structural integrity.

 

[Junny89]

Thanks, I thought this may be the case. Perhaps it will break in. I know exactly what you are describing hearing the spring compress, the pos clone I used for reference to my auth made the same noise...the spring was noticeably stiffer too.

Yeah it's not as stiff anymore. So it's ok, but still is grinding etc which isn't good.
Put a new build on but it's better than before but still not getting that satisfying vape.
1ohm 2.5mm id 0.32mm wire. 5wraps.

Sent from my Passport using Tapatalk