SXK Billet box...

[gsmit1]

I split my wicking and fed each side over so that it sits right under the holes. Just seemed like the thing to do I got no leaking on my first try.

Wadda bonehead I am.

I just realized I was answering this for the wrong rba.

 

[Andy freeth]

Hi all,

have a question if any of you can assist it would be greatly appreciated.

I want to put some authentic inners on my SXK bb, this obviously means there is no USB port on the inners.

Does anyone know where would be best to put some electrical tape to stop shorting and also allow the inners to fit?

thanks

 

[Andy freeth]

Just to add these are the inners I am buying.

The Plate [BB Vapes Brvnd x Marc MPR]

underneath the inners is acrylic, is there even a need to tape over anything?

 

[gsmit1]

I've never done it, but I know that many have tucked the usb port inside to use inners that don't nave the space for one.

 

[badinfluence357]

Hi all,

have a question if any of you can assist it would be greatly appreciated.

I want to put some authentic inners on my SXK bb, this obviously means there is no USB port on the inners.

Does anyone know where would be best to put some electrical tape to stop shorting and also allow the inners to fit?

thanks

If you dont use the micro usb just clip the wires and get rid of it. Just make sure to install updates or whatever it is that you may need from escribe befor cutting the cord...I only use wattage but if your into the temp control thing then just tape away.

Sent from my SM-G950U1 using Tapatalk

 

[badinfluence357]

I need to know what are the best wire gauges to use on the dna 60 and if anyone has links to good silicone wire...

Sent from my SM-G950U1 using Tapatalk

 

[dwcraig1]

I was thinking that Fatdaddyvapes had it but has no 16 or 18
SHOP
Here's some 18:
BNTECHGO 18 Gauge Silicone wire 5 ft red and 5 ft black Flexible 18 AWG Stran... 799705989429 | eBay

 

[gsmit1]

How do you find the condensation build up? I stopped running my supbox in BB mode with a Vapesnail because the condensation was so bad. Also felt like the af was too constricted with the way the abs cage doesn't really allow direct airflow. Kind of wooshes in from all the little cracks and gaps

I just took mine apart to rewick it after about 2 and a half tanks. Like I say, low power mtl tc.

So help me friend, this is what it looked like when I pulled the boro.

 

[Pigs]

I just took mine apart to rewick it after about 2 and a half tanks. Like I say, low power mtl tc.

So help me friend, this is what it looked like when I pulled the boro.
View attachment 925625

Sounds like I'm pretty much at the opposite end of the BB spectrum. If I'm using a Boro I normally vape a Xeta wide open/RDL with a little 0.4 to 0.6 Ohm fused clapton at around 25 to 30W. Pretty steamy.
Glad it's working for you though. I do love the Supbox in it's other modes - currently got a 25mm diameter, 63mm tall hunk of steel on mine (Kayfun 5 Squared SE)

 

[badinfluence357]

I was thinking that Fatdaddyvapes had it but has no 16 or 18
SHOP
Here's some 18:
BNTECHGO 18 Gauge Silicone wire 5 ft red and 5 ft black Flexible 18 AWG Stran... 799705989429 | eBay

What about the very thin wire thats used for the switch and buttons any clue what gauge or type of wire is best?

Also those anyone know a source for the up and down buttons switch? I burned a pad off mine while rebuilding the gold BB. Its been a nightmare...

Sent from my SM-G950U1 using Tapatalk

 

[dwcraig1]

What about the very thin wire thats used for the switch and buttons any clue what gauge or type of wire is best?

Also those anyone know a source for the up and down buttons switch? I burned a pad off mine while rebuilding the gold BB. Its been a nightmare...

Sent from my SM-G950U1 using Tapatalk

30 AWG Gauge Stranded Hook up Wire Kit 5 FT EA 8 Color Ul1007 300 Volt for sale online | eBay

 

[badinfluence357]

30 AWG Gauge Stranded Hook up Wire Kit 5 FT EA 8 Color Ul1007 300 Volt for sale online | eBay

Thanks again my friend

Sent from my SM-G950U1 using Tapatalk

 

[badinfluence357]

So got the Dna board installed. fire button is good on the sxk gold bb but I mucked up the up and down button pad...anyone have a source for this part?

Sorry for being a pain in the ... my friend's but this is how we learn...

Sent from my SM-G950U1 using Tapatalk

 

[dwcraig1]

Thanks again my friend

Sent from my SM-G950U1 using Tapatalk

I don't believe those are silicone, still probably OK.
Here is some that is silicone:
30 Gauge Silicone Wire Kit 10 Color 200 deg C 600V Total 100 ft Each Color 10 ft 742271698080 | eBay

 

[badinfluence357]

I don't believe those are silicone, still probably OK.
Here is some that is silicone:
30 Gauge Silicone Wire Kit 10 Color 200 deg C 600V Total 100 ft Each Color 10 ft 742271698080 | eBay

Thanks, added to cart to purchase...

Sent from my SM-G950U1 using Tapatalk

 

[badinfluence357]

Need that up and down button pad. any sources?

Sent from my SM-G950U1 using Tapatalk

 

[Tamer El-Meehy]

Just got the SXK Evl Alien. It’s really a tight fit inside the BB. I managed to put it once. But when I got it out to work on my coil I can’t put it back. Help..anybody?


Sent from my iPhone using Tapatalk

 

[dwcraig1]

Just got the SXK Evl Alien. It’s really a tight fit inside the BB. I managed to put it once. But when I got it out to work on my coil I can’t put it back. Help..anybody?


Sent from my iPhone using Tapatalk

How about a photo of the atty/box? Not the BB, the Boro

 

[Tamer El-Meehy]

How about a photo of the atty/box?

Victory!! I just pressed upwards a tad bit and it worked!!

Sent from my iPhone using Tapatalk

 

[Tamer El-Meehy]

Victory!! I just pressed upwards a tad bit and it worked!!

Sent from my iPhone using Tapatalk

Great flavor and excellent MTL vape. Tried it with the 1 mm air insert and a 1 ohm build.


Sent from my iPhone using Tapatalk