SXmini M Class (TEMP CONTROL)

[Hitcat44]

Bugs? Dog's got Bugs. No thanks....
Looks a ton like the EK and other than Base-Side AFC, Designs are identical at the Core.
Dig the Looks and I bet it does nicely.
But at $175 I'm gonna need some serious time to squirrel away more Sock-Money. The SXMM & EK done tapped me out.
And, the Wife is on to me. Have to get her that S6 Edge she wants first to distract and lull her into a State of ambivalent Complacency.

 

[Hitcat44]

No help here 2legs.
My only advice is to look up the Voodoo Witch Doctor I fired last week. He did say once that he used to work for Bill Gates.
Think he headed up the Windows Vista Project or something.

 

[Yozhik]

Bugs? Dog's got Bugs. No thanks....
Looks a ton like the EK and other than Base-Side AFC, Designs are identical at the Core.
Dig the Looks and I bet it does nicely.
But at $175 I'm gonna need some serious time to squirrel away more Sock-Money. The SXMM & EK done tapped me out.
And, the Wife is on to me. Have to get her that S6 Edge she wants first to distract and lull her into a State of ambivalent Complacency.

If I had to give up one or the other, it would be the ErlK. Gem is the perfect atomizer for the SX Mini. Much easier to build, wick, re-build, change AFC, etc., and it also has top flavor. I do love the ErlK as well, but it requires more time and patience than I sometimes have to offer my atomizers.

 

[2legsshrt]

I get a message when I try to do the upgrade that this file is not supported

 

[ThunderDan]

Got my yihi SX sleeve in today, definitely has a nice fit, and feel in the hand IMO. My wife liked it too, so much so she just put her Triton on it to "see how it looks on it", now I'm sitting here using the DNA40 she took from me last month.

 

[krackpot]

Thinking about getting a SXMM, but worried about battery life. How is it with the new/latest firmwares?

My subox lasts about 1-1.5 days on the rba with the way I vape. I do a battery swap once a day.

 

[JimScotty0]

Thinking about getting a SXMM, but worried about battery life. How is it with the new/latest firmwares?

My subox lasts about 1-1.5 days on the RBA with the way I vape. I do a battery swap once a day.

It all varies depending on your build. Somedays I go through 3-4 batteries like on the weekend, and other days only 2. But my batteries are a bit tired and my builds more often these days are dual Ti coils built to low ohms which do suck up the power.

 

[Haylon357]

Thinking about getting a SXMM, but worried about battery life. How is it with the new/latest firmwares?

My subox lasts about 1-1.5 days on the RBA with the way I vape. I do a battery swap once a day.

I consider myself a heavy hitter. I go through no less than 2 a day. A max of 3. That's using dual 26 gauge kanthal chiming in at 0.5. Temp control is pretty close to the same so far.

Tapped From My LG G4

 

[refuzeandrezizt]

Moderated.

Sorry! Didn't realize that was an issue...

 

[ThunderDan]

These HG2s are the bees knees. I'm at 17k on the joules counter, and the battery is still at 3.84v charge.

 

[Hitcat44]

Only hit mine in after Work in Evenings then next morning until leave for work. Battery (25R) lasts for a couple days and I do hit it often at those times of day.
No issues for me anyways regarding Battery life.

 

[2legsshrt]

Man I wonder what is taking YiHi so long to come up with a better Ti firmware. Or if they are even working on it. Seems like they could've come up with something by now. I figured out my problem with the upgrade. On my other computer when I changed the SXI I didn't reload the driver and I uninstalled the old one. Duh.

 

[2legsshrt]

Just put my first HG2 in so will report back haven't gotten them all charged yet.

 

[2legsshrt]

It kind of pisses me off that they haven't even put a word out about the Ti. Now I have all this Ti wire. Unkamen and Vape Mesh. Going to build my first coil today and give it a try, but I was hopiing they would've come up with something by now. Think I will try the vape Mesh first and see how it is. Doesn't seem that much springier then Kanthal but it is vacuum annealed. Pretty nice wire looks like Kanthal to me. Finally rested up from the trip so time to set up my mobile lab.

 

[Vlad1]

It kind of pisses me off that they haven't even put a word out about the Ti. Now I have all this Ti wire. Unkamen and Vape Mesh. Going to build my first coil today and give it a try, but I was hopiing they would've come up with something by now. Think I will try the vape Mesh first and see how it is. Doesn't seem that much springier then Kanthal but it is vacuum annealed. Pretty nice wire looks like Kanthal to me. Finally rested up from the trip so time to set up my mobile lab.

C'mon 2legs... I kind of chuckled at this initially. Does it really piss you off they haven't released more information about a feature that wasn't present on the device when you bought it and was thrown in for free after the fact and still in development? Think about it 60W to 75W single battery, 120W to 150W dual battery, Eco mode, 5 additional Mx locations, Ti support just to name a few off the top of my head that's all been icing on the cake to me and none of them cost me a dime more than what I originally paid. That's what I call after sales service.

 

[JimScotty0]

It kind of pisses me off that they haven't even put a word out about the Ti. Now I have all this Ti wire. Unkamen and Vape Mesh. Going to build my first coil today and give it a try, but I was hopiing they would've come up with something by now. Think I will try the vape Mesh first and see how it is. Doesn't seem that much springier then Kanthal but it is vacuum annealed. Pretty nice wire looks like Kanthal to me. Finally rested up from the trip so time to set up my mobile lab.

2Legs, maybe you should consider a SXM Clone instead? lol

SX Mini M Class CLONED

They did a damn good job and not so easy to detect. Check it out with lots of pictures of Authentic and Clone versions.

 

[ThunderDan]

Just put my first HG2 in so will report back haven't gotten them all charged yet.

I got 29k joules from my first one. That was vaping on a dual Ti build, 40J at 270F under ni200 profile.

 

[Vlad1]

2Legs, maybe you should consider a SXM Clone instead? lol

SX Mini M Class CLONED

They did a damn good job and not so easy to detect. Check it out with lots of pictures of Authentic and Clone versions.

No one is immune to cloning in the vaping industry. Looks pretty nice from the pics but they say the electronics are garbage in the clone. I'm sure some unsuspecting vaper will end up buying them thinking they're getting a great deal to find out they have a POS.

 

[2legsshrt]

Well I did my first Ti coil. 3mm 5 wraps 26awg Vape Mesh Ti. Came out at .29. Not sure if I like it. It's kind of making my throat feel funny and my lungs hurt a little. Maybe I am just imagining it I am only using it at 390 15J in Ti mode. Holding temp pretty well but not sure if I like it or not. Just bumped it up to 440 and 20J. I am not buying any clones I have 3 of these and love them on nickel.

 

[Ardy]

8-9 wraps of Ti G1 on a Clouper z4 RBA head .48 ohm. Set at 23J @ 410f and I'm getting stronger hits than with Ni at the same temp. I like the better flavor I'm getting with Ti. So far no complaints.