SXmini M = PWM "Probably Worth More" than the $200 bones I laid down for it.
I see what you did there...
lolSXmini M Class (TEMP CONTROL)
- Thread starter whitewidows
- Start date
- th_trl_thread_readers 0
- Status
I see what you did there...
lol
SXmini M = PWM "Probably Worth More" than the $200 bones I laid down for it.
I see what you did there...
OK - guys, I don't follow either post. It is early and I have only had one cup of coffee. Would you mind explaining what you are talking about.
Yesterday folks were getting enthusiastic about what type of signal the SXmini M was using, PWM, DC-DC ect.. and apparently there were some problems with other threads that were getting into some of the technical aspects that had to be closed. So it was suggested those discussions be taken elsewhere. So I was just goofing and saying that.
The SXmini m is Probably Worth More than $200 "PWM"
For what it's worth, I've heard my provari humming too but I can't replicate it. We all know that's not PWM. It may also be because of the bees in my head??
Or is that technical term buzzing?
Sent from my iPhone using Tapatalk
Or is that technical term buzzing?
Sent from my iPhone using Tapatalk
PWM is Pulse Width Modulation.....in case you didn't know.... Good one Vlad
Vlad,
I am really having a bad day I had to stare at your reply for a couple of minutes before it dawned on me. I guess I am going to have to return my "Mensa" member card.
Last edited:
PWM is Pulse Width Modulation.....in case you didn't know.... Good one Vlad
Bike,
I got the PWM part I just didn't see the acronym he was building. - Ugh!
Just to clarify... Since the M Class has been released, there are folks coming to this thread looking for instructional information / discussion. Most do not want to wade through blocks of postings regarding technical info which does not interest the typical end-user of this device. They simply want to know how to make it work..
I'm officially assigned to both the APV and RBA forums / sub-forums. My job is difficult enough without needing to watch a few select threads like a hawk..
Just to clarify... Since the M Class has been released, there are folks coming to this thread looking for instructional information / discussion. Most do not want to wade through blocks of postings regarding technical info which does not interest the typical end-user of this device. They simply want to know how to make it work..
I'm officially assigned to both the APV and RBA forums / sub-forums. My job is difficult enough without needing to watch a few select threads like a hawk..
Ok boss! Sorry bout that. Back OT I think....
It is very possible that the hum (noise) that people are hearing it just the DC to DC converter's transformer buzzing. if any of the turns on the toroid are a smidge lose or the entire assembly is not snug down on the circuit board they will tend to vibrate (usually at a sub-harmonic of the converter frequency).
PS - at over sixty my ears have a tough time hearing a Cuisinart Food Processors.
I'm not saying it cannot be discussed.. Just clarifying .. The thread title alone is bringing many folks looking for help over this way. Just Google SXmini M Class to see what I mean..
As I suggested earlier, perhaps someone could open another thread to discuss the more in-depth technical aspects of the SX350J.. Hopefully it could be discussed in a manner which will not allow it to be closed down like the other..
Last edited:
Vlad,
I am really having a bad day I had to stare at your reply for a couple of minutes before it downed on me. I guess I am going to have to return my "Mensa" member card.
More coffee. I've finished a pot already. Getting ready to make another. That will get you started
Just to clarify... Since the M Class has been released, there are folks coming to this thread looking for instructional information / discussion. Most do not want to wade through blocks of postings regarding technical info which does not interest the typical end-user of this device. They simply want to know how to make it work..
I'm officially assigned to both the APV and RBA forums / sub-forums. My job is difficult enough without needing to watch a few select threads like a hawk..
I came here lookin for both, but you're right on that point. It would be easier for me.
I found a joules to watts calculator which makes no sense to me. 20J for 10sec my average puff=2w
Vaporshark just announced Atlantis nickel coils:
Vapor Shark has collaborated with Aspire to bring the groundbreaking temperature limiting technology of the Vapor Shark rDNA 40 to the massively popular Atlantis tank. These replacement atomizer heads for the Atlantis tank feature coils wrapped from pure Nickel (NI-200) wire at 0.15 ohms, allowing you to monitor and limit the temperature your coils are reaching. Because these coils are only for use on devices capable of temperature sensing and limiting technology, we have changed the color of the silicone ring on the atomizer heads from clear to Vapor Shark blue for increased safety and ease of identification.
$21.25 for a 5-pack
Aspire Atlantis Nickel Coils (5 Pack) - Aspire - Accessories
Last edited:
I am a long time lurker and saw that technonut wanted someone to start a thread on the chip in this mod. It is here http://www.e-cigarette-forum.com/fo...echnology-discussion-thread.html#post15634922
It seems to be a very nice mod. I don't know much about temperature protection, but I may buy one to try.
It seems to be a very nice mod. I don't know much about temperature protection, but I may buy one to try.
- Status
