SXmini M Class (TEMP CONTROL)

[2legsshrt]

The Yihi SX Mini Sleeve is definitely better than the ones you find on eBay. Individually boxed and tighter fitting. Nice complement to an already awesome mod. Well worth the price...

Yep I got the ones from Ginger Vapes and they are like I thought they would be. The buttons are hard to push and they slip which I fixed with double sided tape. My SX's are wrapped with Jwraps too and the tape comes right off. My new ones should be here tomorrow. I am glad I tried the Ti at first I wasn't sure but now using it on the Ni mode it works great and the flavor is great. I have about 100' of 26awg 35 Unkamen and 65 vape Mesh. Haven't tried the Unkamen yet but the vape mesh is easy to use and nice and shiny. Now getting the wicking down which I know I will and YiHi coming out with some decent firmware I'll be very happy.

 

[2legsshrt]

Oh I got the same as Dan on the HG2 29000J. Pretty good. I don't have a real problem with battery bar drop either. Pretty damned nice for 8 bucks. Plus I got free shipping 1st Class but just as fast as Priority. Not sure if Free shipping is normal or it's that I am a regular customer. I've been buying batteries from them for a few years. Also free cases for each pair. RTD is the best IMO.

 

[mr.fabe]

Oh I got the same as Dan on the HG2 29000J. Pretty good. I don't have a real problem with battery bar drop either. Pretty damned nice for 8 bucks. Plus I got free shipping 1st Class but just as fast as Priority. Not sure if Free shipping is normal or it's that I am a regular customer. I've been buying batteries from them for a few years.

I'll have to give those a try... I just bought a bunch of sammy 25R's which gives me 23-26k joules

 

[2legsshrt]

I'll have to give those a try... I just bought a bunch of sammy 25R's which gives me 23-26k joules

Yeah I was getting 22000 with the HE2's so a pretty good jump. I was tempted to get the VTC5's but $11 stopped me. These are good for 30a pulse and 20a continuous. 3000mAh

 

[Hitcat44]

Thanks for the Hook-Up Gents
2 HG2's from RTD acquired & inbound to Ft. Vape.

 

[ThunderDan]

Are any of you using contact Ti coils or not? If so how many wraps 26awg

I did, not sure if I was supposed to, but it seems to be working fine. I'm using a Hastur RDA, which has a kinda smallish build deck for a RDA, so I used 8 wraps around a 2.5mm mandrel, dual coil, reads .18ohm on my SX M.

 

[m00shie]

HG2 rocks! I'm usually half bar at this stage with the 25R

 

[footbag]

I think my post got lost, but what does the line through the battery indicator mean? Voltage drop below what it's calling for?

 

[Hitcat44]

Saw your Post....
I personally have No Idea. Checked the Owner's Booklet and it doesn't mention or depict such a Symbol. Only an "X" through the Battery or actually Wording to indicate the Issue specifics.
Have you done a Search on ECF or elsewhere on the InterWebz regarding that?

 

[2legsshrt]

I think my post got lost, but what does the line through the battery indicator mean? Voltage drop below what it's calling for?

I don't know either. Have never seen it do you have it plugged in?

 

[2legsshrt]

Checked with YiHi again about firmware here is the answer:
Dear Patrick
The titanium firmware is only a test version. If you are professional and have interested in,you can try to test it which will be working better.
Welcome to feed back to us. Our engineer is try to test now.

Best Regards
Fancy

 

[2legsshrt]

I did, not sure if I was supposed to, but it seems to be working fine. I'm using a Hastur RDA, which has a kinda smallish build deck for a RDA, so I used 8 wraps around a 2.5mm mandrel, dual coil, reads .18ohm on my SX M.

Ok thanks Dan what settings and mode do you use for that, that is with 26awg?

 

[Hitcat44]

Checked with YiHi again about firmware here is the answer:
Dear Patrick
The titanium firmware is only a test version. If you are professional and have interested in,you can try to test it which will be working better.
Welcome to feed back to us. Our engineer is try to test now.

Best Regards
Fancy

Awesome!
Clear as Mud.
No sweat as I am perfectly happy to continue to run Ti in the Ni200 Profile and thoroughly enjoy the Device As-Is.
Remain Calm & Vape On.
Mmmmmmmm, tasty Ti Vapors

 

[HolmanGT]

I think my post got lost, but what does the line through the battery indicator mean? Voltage drop below what it's calling for?

Mine does the diagonal line thru the battery bar also. It is my opinion that it does it when the battery sag is going far below 3.2 volts. And oh by the way it only does it when I use some junky "MXJO" batteries that I bought. They are terrible, don't last long and sag really bad during firing.

 

[TheotherSteveS]

Checked with YiHi again about firmware here is the answer:
Dear Patrick
The titanium firmware is only a test version. If you are professional and have interested in,you can try to test it which will be working better.
Welcome to feed back to us. Our engineer is try to test now.

Best Regards
Fancy

Fancy that!! lol!

 

[TheotherSteveS]

Mine does the diagonal line thru the battery bar also. It is my opinion that it does it when the battery sag is going far below 3.2 volts. And oh by the way it only does it when I use some junky "MXJO" batteries that I bought. They are terrible, don't last long and sag really bad during firing.

one of the nice thing on the dicodes is that you can set a minimum voltage allowed under load so the batt will never get too creamed!! Cool feature. Twould be an easy feature for yihi to add in to a FW update I reckon!

 

[Hitcat44]

They will release a "Test Version" containing that feature

 

[TheotherSteveS]

They will release a "Test Version" containing that feature

lol! Presumably engineer is try to test now...

 

[2legsshrt]

Fancy that!! lol!

Probably testing it with shark fin soup.

 

[HolmanGT]

Probably testing it with shark fin soup.

Legs,

Have you had your coffee yet? A little cruel for this early in the day.