TAE (Tilemahos Armed Eagle)

[imeothanasis]

guys, in about 10-15 days, eagle at 23mm will be in stores ready for sale

It seems that the only thing that prevented some customers to buy eagle was its diameter. We solved that too

 

[Chodi]

I understand prong. But the base is used only to make a coil. If you want to do the rest (fine tuning, measure resistance etc), you can do it with eagle itself. Just put everything in place except mouthpiece body and cap

If I understand this correctly what you are suggesting would require dumping the liquid first or starting with a dry tank? If you remove the body from the build deck wouldn't that dump the liquid? If so, that would not work for dry firing coils and re-wicking.

 

[imeothanasis]

hi chodi. I mean that brass ring is used just to make a coil. If you want to test it for hot spots or anything else you can use eagle by itself like you do on every other atomizer

 

[Chodi]

hi chodi. I mean that brass ring is used just to make a coil. If you want to test it for hot spots or anything else you can use eagle by itself like you do on every other atomizer

Thank you so much for your quick reply I wasn't expecting that. Very interesting having the designer respond directly. A welcome change.

I guess I will have to wait for one of the English speaking Youtube reviews to get their hands on this model. From your video it looks like you must have the plastic third party lock ring to build and fire on a mod or something like a Coilmaster. I realize from your video it is possible to break the tank down and use it for this purpose but that is more difficult and it appears it would not retain liquid at that point. That 3D printed plastic lock ring is really the solution.

 

[tifozi]

A build that makes a MTL rta to be equal or even exceed a rda in flavor; SS316L 0.25mm wire, colis 3 x 2mm with CottonBacon with Tilemahos Armed Eagle

 

[Chodi]

A build that makes a MTL rta to be equal or even exceed a rda in flavor; SS316L 0.25mm wire, colis 3 x 2mm with CottonBacon with Tilemahos Armed Eagle

View attachment 706483 View attachment 706485 View attachment 706487 View attachment 706489 View attachment 706491 View attachment 706493 View attachment 706495 View attachment 706497

You are something of an artist. I have no doubt that the results of that build would be amazing. I think it would require exceptional patience to perform that build. I fear that might be beyond my level of competence.

 

[imeothanasis]

chodi, its easy. The tank is 3 pieces, so:
Unscrew the bottom piece.
Put the deck inside it.
Screw the 510 base.

Put it on your mod

 

[GusE]

Hi Thanasis, I went to a machine shop and they managed to make a pin with 1mm hole for the Eagle atomizer. Unfortunately they couldn't do it on a stainless steel because they didn't have the drill for it. I just did it for a test. The flavor with a 1mm pin hole is outstanding!! No comparison. Now the difference in flavor is day and night than before. This is my favorable atomizer but too bad the pin is not Stainless Steel and I can't use it. You must make 1mm pins. Maybe a .8mm might be good also. I can't wait for it.
Thank you Sir.
Gus

 

[imeothanasis]

good morning gus my friend!

No worries because I have already made the below pins:

0,8
1
1,2
1,6
1,8
2,5
3
3,5

They are on the cleaning process right now so they will be ready soon!

 

[Fabrick]

Hi everybody. I'm a new ECF member. I love Greece and The GG creations.
Now I'm vaping by an SX Mini M class and Tilemahos Armed 22mm. I like too much this atom, it's the best I've ever used (as well as Ithaka).
I'm waiting for Tilemahos Armed Eagle 23mm; tomorow it should be available in my trusted e-cig shop: Bitfumo in Rome, right near where I leave.
Imeo, I'm nice to know you (I seem to know you really, so many times I watched your videos) and all members that I follow since many months.
I'd like to know if all spare parts will be availavle for Armed Eagle 23mm like Armed. Particularly: glass tank and pins you just shown above. I understand that the pins are the same of Armed Eagle 25mm, it's right?
Thank you.

 

[imeothanasis]

thank you very much for your kind words Fabrick! Its nice to meet people like you

I am glad that you will receive soon your eagle and I wish you a nice flight with it! And yes, all spares will be available. If not in all shops, but they will be available in general. As for the pins, they are not ready yet, but very soon

 

[imeothanasis]

 

[nickwerner]

Hi everyone,

this is my first post, so please be kind

I want to love the TAE. It looks great and fits perfectly on my Dani 25 tube mod. I have a little bit of a problem with the wicking though. Everytime I wick, I get a good draw for a few hours. I leave the TAE on my mod over night and when I come back in the morning, looking forward for a good vape, It has completely leaked (by completely I mean that it is flooded and liquid is running down my mod).

I have tried more cotton, less cotton, springs or self made coils, always the same issue. I have checked and replaced all O-rings with no effct. I have also made sure that I insert the deck correctly with the cotton towards the liquid holes so I am out of ideas. The only possible culprit could be my liquid. I use 65%PG, 30% VG, 5% H2O liquid. I works perfectly in an other tank so I would assume it should work in the TAE as well.

Has anyone esle experienced anything like the above? Is there anything I can do?

Thanks
Niklas

 

[Chodi]

Hi everyone,

this is my first post, so please be kind

I want to love the TAE. It looks great and fits perfectly on my Dani 25 tube mod. I have a little bit of a problem with the wicking though. Everytime I wick, I get a good draw for a few hours. I leave the TAE on my mod over night and when I come back in the morning, looking forward for a good vape, It has completely leaked (by completely I mean that it is flooded and liquid is running down my mod).

I have tried more cotton, less cotton, springs or self made coils, always the same issue. I have checked and replaced all O-rings with no effct. I have also made sure that I insert the deck correctly with the cotton towards the liquid holes so I am out of ideas. The only possible culprit could be my liquid. I use 65%PG, 30% VG, 5% H2O liquid. I works perfectly in an other tank so I would assume it should work in the TAE as well.

Has anyone esle experienced anything like the above? Is there anything I can do?

Thanks
Niklas

So you have been running your Armed Eagle with 65% PG. That is going to be like water. You don't get leaking when you vape only when left unused to sit overnight. I would ask if you are closing the juice flow control(screwing it down) when you set it down after you vape? Using 65% PG when left to sit for a long time if the juice flow is open it would probably work through the cotton and flood through the tank.

 

[Yaya]

Hi everyone,

this is my first post, so please be kind

I want to love the TAE. It looks great and fits perfectly on my Dani 25 tube mod. I have a little bit of a problem with the wicking though. Everytime I wick, I get a good draw for a few hours. I leave the TAE on my mod over night and when I come back in the morning, looking forward for a good vape, It has completely leaked (by completely I mean that it is flooded and liquid is running down my mod).

I have tried more cotton, less cotton, springs or self made coils, always the same issue. I have checked and replaced all O-rings with no effct. I have also made sure that I insert the deck correctly with the cotton towards the liquid holes so I am out of ideas. The only possible culprit could be my liquid. I use 65%PG, 30% VG, 5% H2O liquid. I works perfectly in an other tank so I would assume it should work in the TAE as well.

Has anyone esle experienced anything like the above? Is there anything I can do?

Thanks
Niklas

Hi. Can you tell where it is leaking from? Try checking the edges of the glass, I had a little problem with that. The thin washers tend to distort if you’re not careful.

 

[subver]

Hey everyone! Very long time no see... I've been out of the loop for a long time now but I've got my eye on that TAE, 23mm.. the Cybrillion is 23mm as well, yeah?

Right now I'm using an Esterigon with original Tilemahos. I love it but I am itching for an upgrade.

I still need to go through these threads and watch the videos, so I'm sorry if this has been asked or shown but, the TAE 23mm is still able to do one single coil, yeah? I haven't really played around with dual coils or anything fancy in a long time... maybe I'll change it up, but right now I tend to just stick with a simple single microcoil with cotton wicks.

Having trouble finding a Cybrillion but hopefully I can snag an Armed Tilemahos Eagle!

As far as US shops (that will carry the TAE), are they out of the question now? Not sure which site I should order mine from if I'm based in the US.

Sorry guys, I know I need to read threads more, I'm at work now and don't have the time, I just want to make sure I can get a TAE when they come out!

When I get home I'm gonna watch your video(s) and read more into the TAE and make sure it fits my needs, but a quick look and scrub through some of the video it looks great! Would be an excellent Christmas present to myself

Thanks everyone!

 

[nickwerner]

So you have been running your Armed Eagle with 65% PG. That is going to be like water. You don't get leaking when you vape only when left unused to sit overnight. I would ask if you are closing the juice flow control(screwing it down) when you set it down after you vape? Using 65% PG when left to sit for a long time if the juice flow is open it would probably work through the cotton and flood through the tank.

I have now changed it to 50/50 liquid, but it is still leaking. The liquid comes out of the airflow hole on the bottom. There is a lot of liquid in there . I only open the LC half a turn, so this can‘t be the issue either I think.

 

[nickwerner]

Hi. Can you tell where it is leaking from? Try checking the edges of the glass, I had a little problem with that. The thin washers tend to distort if you’re not careful.

Out of the air flow hole on the bottom. This morning it was running down my mod

 

[subver]

I still gotta check out the Tilemahos v2 23mm as well (not sure of the major differences between V1 and V2 yet).. not sure which one I want... I've been out of the GG loops for so long I feel so lost now! I should have been keeping tabs on everything

So yeah... still have a lot of research before deciding on keeping my Tilemahos, go to Tilemahos v2 or get the TAE.. hmmmmm...

 

[subver]

Sorry for all the posts.. saw the official retailers.. for US Future Mod Shop - will this have the TAE for sale? I heard it would be back out on the 30th?