I ordered on Aug. 2 and shipped on Aug 4. Still waiting because of usps not vaporescence.
Tank-O-Matic Liquinator v4.1
- Thread starter Wylie
- Start date
- th_trl_thread_readers 0
- Status
UPDATE: SS tank is absolutely awesome! Performing like the Derlins but twice as nice! ... Still looking for a local 901 for Pete sakes!
I don't get the point of this system since it still requires cartos with filler. Is the only advantage the ability to hold more liquid?
If you've ever used cartomizers, you find out that the hit from that first vape from a new carto doesn't last that long.
With this tank, every hit is like my first hit on a new carto, even tho my carto is 5 days old and has had untold refills already.
To me...that advantage goes well beyond the ability to hold more liquid.
It makes every vape like a new cartomizer, vape after vape after vape, and some of my cartos last more than 5 days too.
To me, that's a pretty darn good vaping experience from 1 cartomizer.
The point is hassle free vaping... To be able to NOT think about vaping all day strong... No juice to carry, paper towels, pulling out bottles of juice to refill (eeep, that though makes my skin prickle
) your carto/atti every 5-30 minutes (depending how much you vape)... It's like having a full pack of smokes all the time without having to light em... Hell, I haven't thought about that in a looong time... I don't even own a lighter.... Hehe
After almost one full week of ownership of my delrin liquinator I can pretty safely say I've found a good system that works for me.
One thing I did learn was to have extra o-rings on hand. I happened to take a large chunk out of one of the inner o-rings that hug the cartomizer. Also one of my pre-cut carto's was DOA. Sent an email over to vaporescence and received a swift reply asking for my address so they could shoot me over a couple o-rings and carto's! I had already placed an order for backups so hopefully they just toss a few more in my order.
Either way I'll be ready for a short while. I need to expand my juice collection a bit so I stop almost running out and eventually find a good deal on a bulk order of quality LR carto's.
This is really what makes this system work. It holds so much juice that I won't be afraid of running out at the end of the night. You grab the PV, fill up the tank and a freshly charged battery and you will have several hours of chain vaping before you need to re-fill it.
One thing I did learn was to have extra o-rings on hand. I happened to take a large chunk out of one of the inner o-rings that hug the cartomizer. Also one of my pre-cut carto's was DOA. Sent an email over to vaporescence and received a swift reply asking for my address so they could shoot me over a couple o-rings and carto's! I had already placed an order for backups so hopefully they just toss a few more in my order.
Either way I'll be ready for a short while. I need to expand my juice collection a bit so I stop almost running out and eventually find a good deal on a bulk order of quality LR carto's.
The point is hassle free vaping... To be able to NOT think about vaping all day strong... No juice to carry, paper towels, pulling out bottles of juice to refill (eeep, that though makes my skin prickle
This is really what makes this system work. It holds so much juice that I won't be afraid of running out at the end of the night. You grab the PV, fill up the tank and a freshly charged battery and you will have several hours of chain vaping before you need to re-fill it.
Last edited:
I saw that some of the other companies are using similar style tanks, but they use "punched" cartos instead of "slotted". I think several small circular holes in the carto would remedy the resistance tearing of the inner o-rings caused by the dremel slots when contact is made... I am going to give the punching method a go next time I pick up some more cartos.. if anyone as used these in the tank, please feel free to chime in...
I can not find there Email address I would like to find out what O-Rings are need for these tanks so I can pick up some backups to have on hand.
I think I am going to punch or drill out mine. there is a lot of info on how to do this on a few threads. I got two boxes of cartos marked and ready to go.
I think I am going to punch or drill out mine. there is a lot of info on how to do this on a few threads. I got two boxes of cartos marked and ready to go.
i punched a hole in mine with a hammer and roofing nail , worked great
Thats what I ve been using in my avs for over a year now.. punched 808 cartos
Feeds just as great as the slot on the 510 in the liquianator.Careful with the drill! You don't wan to end up wrapping the filler around the drill bit!
But a small nail and hammer will do
I got a jig for my 808 cartos, but there is really no need for something that spiffy.working great, i took a bloog maxxfusion and removed the filling and tube made a atty out of it. it works great to and no adapters needed unless you uses it on a 510 devise. i used a hammer and roofing nail to punch out hole. took me all of 2 minutes.
Check out Vapor-Age, he just put up some punched dual coil cartos for $1.00 less the another supplier and soon he will have a SS tank for them too (called the Depth Charge)! Great vendor and super fast shipping, along with great customer service.
READ post # 502 for carto's -
http://www.e-cigarette-forum.com/fo...r-forum/194116-introducing-torpedo-tanks.html
Last edited:
Liquinator O-Ring Set
Set of four O-Rings for the Liquinator. 2 internal and 2 External.
Available in any color you want as long as it's black.
precise punch or drill hole definitely a must for the DC cartos....slotted DC's are hit or miss with leaking probs, mostly a miss
Set of four O-Rings for the Liquinator. 2 internal and 2 External.
Available in any color you want as long as it's black.
precise punch or drill hole definitely a must for the DC cartos....slotted DC's are hit or miss with leaking probs, mostly a miss
Jonah from Vapor-Age makes top quality tanks. I hope he starts to offer punched Boges as I don't really care for the Dual Coils.
- Status
Similar threads
