~The Billet Box~ page 1559 continued...
- Thread starter Doug Dino
- Start date
- th_trl_thread_readers 0
- Status
That's a Squape [E]. I have all the revisions of Squape and really enjoy their machining and vape quality.
Well I did try to edit one picture with that site, and while I was successful, I don't know how I did it. Some how after it was uploaded it was changed to a PNG file, once I changed it to JPG the file size was correct, it was confusing because I needed the image to be less than 20 mb, and they listed it in KB. My computer only showed it in MB. The BBCode Again! Ahhhh! Those are hard for me to remember.
KAS
Have you got a Google account, KAS?
One of the early ones? You can get it (I've got one too). I usually use the rounded end of a tweezers, applying force.
I was able to get it off ok. I cut a couple thin strips of paper to go across the top edge across the magnets to weaken them. Now when I get the new button I can get the panel off real easy.
I do, I have heard a bit about what they have for pics, but I have not really looked into it. I got almost everything on Imgur today and it looks like it will work fine for me. I might look into it anyway, I have not heard of anyone using it as a host for something like this though.
KAS
This was my last group shot I took of my Rev 3's, it is missing the pink and the other RPG and that I got later, but here it is anyway. 
I need to do a new BB collection pic.
KAS
I need to do a new BB collection pic.
KAS
I have 1 REO 2.1 Mini (packed up - not used), and handful of MMV Nanos (packed up - not used - mech tubes - love them), 2 Microsticks (not used - 1 with MiniAtty and 1 with a MicroDrip).
I use to be a mech only girl (cept for a few ProVaris I had but have long since sold all of them) and while I will always have mechs - the BB just stole my heart.
BBs are all I use nowdays - I love the form factor. I do have my Spheroid v4 (I have 2) set up and swap out on a gorgeous JM16 14500 mech tube. I just don't have a need for anything else. I love the Boro tanks (I have around a bakers dozen set up with Exocets/juice) and just swap them around to whatever I want to take with me that day.
I need to get a family photo of my BBs - I have a few more coming and some custom DTs and buttons.
Family pic minus the ones coming from the sale yesterday and a couple duplicate colors. The orange v3 is my project BB - got the front panel off with the help of Krisma (thank you!) so now just to decide what I want to do with it.
Sent from my iPhone using Tapatalk
and a couple duplicate colors. The orange v3 is my project BB - got the front panel off with the help of Krisma (thank you!) so now just to decide what I want to do with it.
Sent from my iPhone using Tapatalk
Hey guys, just introducing myself. Ordered a Rat Black Blem on Saturday and I am eagerly awaiting shipment!
I have done a lot research and read through a bunch of the recent pages in this thread, and still have some questions, if you could help I would greatly appreciate it. Here we go:
1) I am in need of a drip tip. Any websites besides DHD offer a decent selection of tips? I am looking mainly for Ultem but I'm open to other suggestions. I know Dee Mods makes some nice ones but it seems they work best with the flush drip tip adapter, and I can't find those anywhere.
2) I ordered an OCC Adapter direct from BB website. Does this work with the Kanger RBA Plus rebuildable head?
3) I am planning on ordering a clone Exocet because I don't want to drop money on an authentic RBA for the BB yet. Is this even worth it? Seems most people are 50/50 on the clone, any recent reviews? It's only 15 bucks I guess it's worth it no matter what.
I am looking to have options. I want to be able to MTL if I need to, and have a DTL also. I think the subtank coils are fine for DTL because I used to actually like those coils, but I always prefer rebuilding, any suggestions? I hear a far as MTL goes I can get the Kayfun inserts and put them into the Exocet and that should be a perfect way to dial in a good MTL.
Thanks for any help you guys can offer!
I have done a lot research and read through a bunch of the recent pages in this thread, and still have some questions, if you could help I would greatly appreciate it. Here we go:
1) I am in need of a drip tip. Any websites besides DHD offer a decent selection of tips? I am looking mainly for Ultem but I'm open to other suggestions. I know Dee Mods makes some nice ones but it seems they work best with the flush drip tip adapter, and I can't find those anywhere.
2) I ordered an OCC Adapter direct from BB website. Does this work with the Kanger RBA Plus rebuildable head?
3) I am planning on ordering a clone Exocet because I don't want to drop money on an authentic RBA for the BB yet. Is this even worth it? Seems most people are 50/50 on the clone, any recent reviews? It's only 15 bucks I guess it's worth it no matter what.
I am looking to have options. I want to be able to MTL if I need to, and have a DTL also. I think the subtank coils are fine for DTL because I used to actually like those coils, but I always prefer rebuilding, any suggestions? I hear a far as MTL goes I can get the Kayfun inserts and put them into the Exocet and that should be a perfect way to dial in a good MTL.
Thanks for any help you guys can offer!
Where are you planning on getting those drip tips? Really in need of some good options, thanks!
I use the Exocet clone and love them - its all I use in my Boros. I hear the Kayfun MTL plug works in them too and quite well. I don't use drop in coils but my son seems to like the Aspire Nautilus coils and the Comfort Bridge. I have a BB Bridge that uses the Aspire BVC Coils coming for him to try as well.
As far as drip tips - I love Chris Gillard's tips - again - all I use. They are integrated and flush - check out my pic above. The orange and green rev4 has Chris' tips and buttons. Check him out of FB or do a google for Tripple C's.
The Kanger RBA uses the Racing Bridge BilletBridge Racing
Here are other bridges Advanced search :: Search results
As far as drip tips - I love Chris Gillard's tips - again - all I use. They are integrated and flush - check out my pic above. The orange and green rev4 has Chris' tips and buttons. Check him out of FB or do a google for Tripple C's.
The Kanger RBA uses the Racing Bridge BilletBridge Racing
Here are other bridges Advanced search :: Search results
Thanks, I am going to look into those drip tips, they look really nice. I appreciate the help.
I know the Racing bridge is the RTA Base Bridge, was just hoping the OCC Adapter would work as well (wishful thinking). I am going to call it quits for "round one" buying because once the Exocet clone comes in I will have a nice pre-built option (OCC) and then a nice rebuildable option, the Exocet.
Thanks again!
Family pic minus the ones coming from the sale yesterday
Sent from my iPhone using Tapatalk
Beautiful collection!!!
Since I got it, My Billet Box has been my primary go to device as I primarily do MTL.
I recently found Squonking and enjoy that for the hobby of it. I use a Noname NFG, and an HCigar VT inbox, may sell my Therion BF.
I use my Vaporshark DNA 40 with a Vika Tank for yard work. I have a Vapor Shark rDNA 60 because I really like it, I have my Provari Procyon Stealth and Radius Stealth with Stealth Kabuki's that will never leave the collection. I have the Therion DNA166 and SX Mini G Mini for high wattage on the occasion that I need it.....and that's after a big selloff I had because my BB is the device I grab 90% of the time, I'm hoping to grab a Dober to mix things up.
Sent from my iPhone using Tapatalk
I'm getting rid of the Radius, either. It would literally have to be pried out of my cold, dead hands. I'm definitely going to pick up another Billet Box sometime in the future, just to have a backup. I really don't need more than 3 mods, one for its own style of vaping. I have to admit, I always wanted a nice stab wood mod, but could never justify an expense for something so impractical.
Come on now, we could justify the most outrageous things.
We use it more than our cell phone.
For the amount we saved from no longer smoking, you are still way ahead. Well....maybe?
Quality material, you KNOW you have a premium product with Stab wood.
Just a little color when we want to change things up.
Color coordination with what you are wearing.
Would you like me to come up with some more justifications for you?
you'd be surprised at what I can come up with for myself. Sent from my iPhone using Tapatalk
Come on now, we could justify the most outrageous things.
We use it more than our cell phone.
For the amount we saved from no longer smoking, you are still way ahead. Well....maybe?
Quality material, you KNOW you have a premium product with Stab wood.
Just a little color when we want to change things up.
Color coordination with what you are wearing.
Would you like me to come up with some more justifications for you?
Sent from my iPhone using Tapatalk
Hahaha, you're definitely not wrong. I am known to make some completely unjustified, extravagant purchases every now and again.
Considering that a pack of cigarettes costs $13-$15 in NYC and I smoked a pack every two days, I definitely saved a ton of money.
I wish someone would make a true MTL rebuildable for the BB that does NOT have ginormous wick holes or airflow.
The Exocet can be made to MTL but you still have to build a large diameter coil to fill the wick holes. Same with the Doggy and Flow. The Kanger RBA and Insider have smaller wick holes but huge air flow.
I guess I could try DIY reducer in the Kanger RBA but I really wish highend modder would make something truly dedicated to MTL.
The Exocet can be made to MTL but you still have to build a large diameter coil to fill the wick holes. Same with the Doggy and Flow. The Kanger RBA and Insider have smaller wick holes but huge air flow.
I guess I could try DIY reducer in the Kanger RBA but I really wish highend modder would make something truly dedicated to MTL.
- Status
Similar threads
- Locked
- Locked
