~The Billet Box~ page 1559 continued...

[ibndevilish]

Depends a bit on your location. I would suggest a google search.

JWraps do sell the "billet box condensation plug" on amazon.
You can also go to 3D Hubs and let them print nearby your location.
Or ask a friend with a 3D printer.
Swiss vaping Technology offer it as well. SVT - Swiss Vape Technology
Drip Tip with the screw in negative part are from Koncio mods Billet Box Drip Tip

Here is a google search but it is from my location which is Switzerland
billet box drip tip - Google Search

Thanks for the info. I did find Jwraps after I posted this. Trying to find affordable drips tips in the USA as I just think 42.00 for a drip tip is extreme. lol

 

[Vapefiend]

Update:

I spoke with atmistique; I don’t know where the emails I didn’t get went but apparently I didn’t receive a few. I was sent the tracking and to my surprise found the package in my mailbox this morning. So strange but sorry I doubted you @Konstantinos thank you.

 

[Vapefiend]

Anyone try a kayfun insert in the kanger rba? I’m bout to give it a go.

 

[autobiogphnation]

Anyone have an uno v2? Really like the concept but heard it wasn’t great for mtl.

I've got one and I love it. It's a bit more open but I enjoy it. My condensation plug on bottom of boro has MTL AFC inserts and I have a 1mm one in there.

My only dislike on the Uno v2 is that when liquid is low on the tank, like down to the cotton tails, it will start to flood on inhale because of pressure differential.

But in the end I love it and I was using vape shell before.

I'm also going to be trying out MF bridge with the 1.3Ω mtl coils soon. Heard that's supposed to be really good. Tighter than uno, but it was also recommended to drill out the mtl base of my bridge to match airflow of uno, I'll see if I can find what size they said for reference.

Sent from my Pixel 2 XL using Tapatalk

 

[autobiogphnation]

Typical O-Piss problems.

Their Ultem panels fit like garbage when they were released...”we have a fix/new version coming out that are 100% true to original panels!”

Their atomizer (Flow) had so many issues...”email us and we will get you a new chimney, so it won’t pull off with the drip tip adapter, and/or so your drip tip will fit in the first place! Also, make sure to build a massive 3.0mm coil or else it will flood and gurgle and leak all over your BB.”

And now the Boxxer has issues...”We have a fix coming soon!” (You’re not the first person I’ve read having these issues.)

O-Piss likes to market themselves as a fancy boutique vape gear company, but they always release products without them being fully tested and ready for use.

Yes, I know they make more than just the items listed above, but a guy can b|t¢h right???

Especially with the prices they charge, you’d think they could afford a little QC and design testing before they launch a product.

They did just say last week that the gasket fix for boxxer is in its final stages to verify it works.
I probably could care less now because in the end I don't think boxxer fits my style of vape anymore, just glad I won one in a waffle instead of paying full price.

Sent from my Pixel 2 XL using Tapatalk

 

[raqball]

Update:

I spoke with atmistique; I don’t know where the emails I didn’t get went but apparently I didn’t receive a few. I was sent the tracking and to my surprise found the package in my mailbox this morning. So strange but sorry I doubted you @Konstantinos thank you.

K is an awesome dude...

 

[Vapefiend]

Using the smallest kayfun insert with the afc on the racing bridge closed almost all the way off I’m getting a nice loose mtl. Not bad flavor is good too considering it’s my first build/wick. I think this ones a winner

 

[Robfisher]

Despite the flimsy grub screws, the Flow is still my favourite bridge!

 

[autobiogphnation]

Don't mind the ridiculously low level of liquid (I just filled my other tank with the Uno in it earlier today) but I got the MF bridge today and wanted to try but not have two full tank going.

Running the 1.3Ω MTL EUC coil (drizzle) currently, did drill out one of the two plastic mtl bases (they're both the same airflow size I believe) with a #62 bit.
Still tighter than my uno but it's enjoyable.

So anyone on the fence about this and you like proper tight MTL, get it. It's tight, so tight that I couldn't even measure the airflow hole! Just make sure you get the full kit with the MTL pieces if so, otherwise you can only run the non-MTL EUC coil

Edit: the two MTL bases are different. Both are advertised as 1mm size airhole, but one has two holes and the other has one. Holes on mine were definitely smaller than 1mm so hence why I drilled to rectify that.

Sent from my Pixel 2 XL using Tapatalk

 

[Vapefiend]

Drilled out the wick holes on the kanger today idk why I just figured it’d be better. So far so good

 

[kas122461]

View attachment 791217 Drilled out the wick holes on the kanger today idk why I just figured it’d be better. So far so good

Just a tip, when you install the coil in your tank with that, always make sure that screw on the side is on the left like it is now. If it is on the right it can spin and break the glass. I know this from experience.

KAS

 

[Vapefiend]

Just a tip, when you install the coil in your tank with that, always make sure that screw on the side is on the left like it is now. If it is on the right it can spin and break the glass. I know this from experience.

KAS

I believe I read that somewhere and it may have been from you! Well aware but thank you kas!

 

[ArminF]

Anyone knows if there are bridges for SMOK, Eleaf or Joytech coils?
They do offer quite a wide range of coils.
thanks

 

[Bamrz]

From FB:

For tomorrow we'll have black, orange, dark blue (yes, finally!!) and bronze.

 

[Bamrz]

My apologies!! That must have been today!

 

[ArminF]

Good Morning,
does anyone have experience with 3D printed parts for the BB?
On thingiverse are panels, buttons, plugs etc...

Search Thingiverse - Thingiverse

Does they just fit out of the box?
thanks

 

[autobiogphnation]

Anyone knows if there are bridges for SMOK, Eleaf or Joytech coils?
They do offer quite a wide range of coils.
thanks

Don't believe so. The coils that are out for existing Bridges do have some variety already.

Sent from my Pixel 2 XL using Tapatalk

 

[ArminF]

Thanks @autobiogphnation
the existing ones especially the kanger are hard to get as they are old and do cost the same as the "newer" version from the mentioned companies.

 

[ArminF]

Morning,
are there any news about the Haku Bridge?
Release date?
MTL set?

 

[Uncle]

Morning,
are there any news about the Haku Bridge?
Release date?
MTL set?

View attachment 792461