The Darwin From Evolv!!!

Status
Not open for further replies.

my2heartboys

Super Member
ECF Veteran
Oct 2, 2010
474
27
Kansas, USA
Thank you for the information, Jack. Think I might email them about mine. I have noticed that the arm is getting wobbly and the darn watts keep changing without me even using the adjuster for them. I gotta say, though, it still vapes like a champ.

On the good side, I have really taken back to the regular attys instead of the LR's. Before it would seem like I had draw on a regular atty super super hard to get the vapor production....now I get huge vapor production at just 6 watts. That really helps on battery life.

Anne

I just wanted to let everyone know my recent experience with Evolve. I purchased the Darwin when it first came out. I think it's been close to a few months now. The last week or so when I would flip the arm up, sometimes it would not turn on. I would have to flip it up and down a few times and it would eventually work.
 

Sewknitty

Ultra Member
ECF Veteran
Nov 12, 2010
1,425
98
NY
shesaquitter.wordpress.com
Thank god for the manual. I had no idea how to use this thing.

We are supposed to rotate the arm up prior to vaping????????

LOL I'm so glad I peeked back over here! :laugh: :lol:

Edit to add: Cuse, I've seriously fallen behind in my vape shopping. Did you pick up anything recently that I should be tossing money toward?
 

Sewknitty

Ultra Member
ECF Veteran
Nov 12, 2010
1,425
98
NY
shesaquitter.wordpress.com
I just wanted to let everyone know my recent experience with Evolve. I purchased the Darwin when it first came out. I think it's been close to a few months now. The last week or so when I would flip the arm up, sometimes it would not turn on. I would have to flip it up and down a few times and it would eventually work. I emailed Evolve letting them know. They responded within a few hours. I was told they would send a new one out, and to send back mine. Not only did they send me a replacement, but they overnighted it to me! Just wanted to share with the board how they went above and beyond. It cost them $18.00 to do so. If something else comes up, I'm going to kindly ask them to send it regular mail. :)

For the folks reading this forum trying to decide on buying a Darwin or not, I want to share something else. Lately, a few of my atty's for some reason have lost some ohms. On another mod I use, I have no way of knowing until I get an error, or the atty starts getting hotter than normal. With the Darwin, it automatically changes the volts so I'm not using to many volts on a lower ohm atty. I might not sound like a big deal, but when you actually are using that feature, it really is a big deal. That along with the no hassle battery make this to me the PV to get.

Thanks for listening!

This has been my experience as well with Evolv and the Darwin. (Pssst...I think Brandon is Santa's delivery guy. If they go weirdly silent...oh, around December...we'll know why.)
 

Liv2Ski

Vaping Master
ECF Veteran
Verified Member
Sep 14, 2010
5,692
2,198
Burnt Hills NY
LOL I'm so glad I peeked back over here! :laugh: :lol:

Edit to add: Cuse, I've seriously fallen behind in my vape shopping. Did you pick up anything recently that I should be tossing money toward?

Not sure what CG added (it has to be something since he gets as many packages a week as I do) but I am waiting on some of those dual coil cartos from Drew. I hope they show up tomorrow and if so I will post how they hit.
 

Sewknitty

Ultra Member
ECF Veteran
Nov 12, 2010
1,425
98
NY
shesaquitter.wordpress.com
Not sure what CG added (it has to be something since he gets as many packages a week as I do) but I am waiting on some of those dual coil cartos from Drew. I hope they show up tomorrow and if so I will post how they hit.

Cool! I saw a review of those on YouTube. I'm willing to give fill another chance for them. Gonna put some in my Nhaler cart. I haven't had a delivery all week...so slippin'.
 

VAPlN'

Super Member
ECF Veteran
Verified Member
Mar 1, 2011
418
974
Iowa
Cool! I saw a review of those on YouTube. I'm willing to give fill another chance for them. Gonna put some in my Nhaler cart. I haven't had a delivery all week...so slippin'.

I'm waiting for Drew to get the holsters in and hopefully those new tanks he's been hinting around about. I hit my quota for March already. I bought: Darwin, TTT Gooseneck, Empire Drip Shields, 15 atty's, 4 Cherry Vapes Drip Tips, and four different sample packs of juice.

Good thing April is next week! I want to restock carto's and 901's and try a few more of Drew's juices. And my vapestand is under construction. Thanks for turning me on to the vape stands Cuse. Perfect for the Darwin with a Gooseneck. Though I don't to put it down much.
 

Sewknitty

Ultra Member
ECF Veteran
Nov 12, 2010
1,425
98
NY
shesaquitter.wordpress.com
....

On the good side, I have really taken back to the regular attys instead of the LR's. Before it would seem like I had draw on a regular atty super super hard to get the vapor production....now I get huge vapor production at just 6 watts. That really helps on battery life.

Anne .


Evolv will take good care of you when you fill out that Contact form at their site.

And, low watts...amazing, right? I didn't know from watts when I got my Darwin and I still don't know. All I do know is, I looked down and saw I'd been vaping 306s (2 ohm) at 7.6 whatevers HAPPY AS HECKADOODLES...The most perfect temperature, great flavor...truly delightful. I popped on another atty - without checking the device - and, yep, still one happy fool was I. Letting go of numbers (and keeping track of odd sized batteries...can't say that too much ever) is such a relief.

Good luck, My2!
 
Last edited:

Sewknitty

Ultra Member
ECF Veteran
Nov 12, 2010
1,425
98
NY
shesaquitter.wordpress.com
I'm waiting for Drew to get the holsters in and hopefully those new tanks he's been hinting around about. I hit my quota for March already. I bought: Darwin, TTT Gooseneck, Empire Drip Shields, 15 atty's, 4 Cherry Vapes Drip Tips, and four different sample packs of juice.

Good thing April is next week! I want to restock carto's and 901's and try a few more of Drew's juices. And my vapestand is under construction. Thanks for turning me on to the vape stands Cuse. Perfect for the Darwin with a Gooseneck. Though I don't to put it down much.

Um...one has to build the vape stand? Darn and I was kinda fond of that... I'm so distracted waiting on the Drew Solution for tanks I'm finding it hard to think straight about much else. Will be getting a drip shield though and try those cartos, collect more Drew drip tips and the Pyrex drip tips for 306...may get a mechanical with a native 801 connection...
 

VAPlN'

Super Member
ECF Veteran
Verified Member
Mar 1, 2011
418
974
Iowa
One of the drip tips I picked up from Cherry Vapes is a 306 Cannon. Very impressed with the quality and feel of their tips AND they look really good too. I think I like the 901 natives for the stronger connection with better threads. You can also adapt it to 801 or 510. I am using a 510-510 bridge on the Darwin so I won't mess up the brass threads when I change out my atty's anyway.

I noticed that I am getting a super vape from a lot of juices at 5.5 to 6.2 watts. Who would have guessed? That's only 4.3 volts on these 3 Ohm BE112's and they perform like champs. That's the lowest voltage I've used with them. Wish I would have tried them at that before...... It's so awesome just to turn the dial and forget about it. And change batteries out to drop down to LR? Not a chance baby!

We are soooooooooooo spoiled SK.
 

Sewknitty

Ultra Member
ECF Veteran
Nov 12, 2010
1,425
98
NY
shesaquitter.wordpress.com
The server was so busy it ate my answer so apologies for any dups.

Vapin', which is adaptable...the Cannon or the drip shield? Doesn't matter since I want both. :lol: And I guess I'm going to have to try a 901, huh? Now that there are drip shields I have no reason not to, I guess.

And, yep, spoiled we are, sir! Vaping like royalty at low pixies...er, watts... Would you have it any other way?
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,591
167,870
Utopia
Ok ok ok, you guys are all making me jealous! I have no Darwin (yet) and just reading this is making me flustered! I guess I'll be 3rd or 4th generation, eh?

A Darwinian grandchild... Spoil me.

Drew, where is my Knight in Shining Armour?

No more new from me for today/tonite.
 
Status
Not open for further replies.

Users who are viewing this thread