The kayfun conversion kit for terminator/nautilus

[deezdrama]

What he said

From all I can tell from posts and pics...

1) the short MP stays inside the tank;
2) then the condom/interface to;
3) the SS carto-body that extends outside the top-nut & tank-cap;
4) to take a 510 driptip.

 

[deezdrama]

Ok... I put the rubber from a vivi on the short chimney


The tube was a very tight fit

I left the hole in the rubber piece, it doesnt affect draw

pressed on

I dont see this sliding off or twisting when using juice control

 

[tagster]

Yes, you've got it right now. You could use the longer chimney, but it sticks up too far for my liking.

From what I understand, the smaller mouth piece was initially designed for use on the Oddy in short mode, but the kayfun core unit ended being to large for that. Then Vochu came up with idea of using the silicon piece and sleeve as a drip tip adapter.

 

[deezdrama]

1/16" micro/cotton





with driptip tube,had to use the bigger diameter o-ring but its a tight fit and the top nut doesnt screw down as far but still works out

 

[Thrasher]

are you proud of yourself?

For the drip tip mouthpiece, I didn't have the appropriate silcone cap (the T3 one is too small) but in desparation I found that a cartomizer condom cut short did the trick. It looks to be a little too big but simply slip the condom over the mouth piece (don't put a hole in the top yet) and then push the outer carto sleeve that comes with the kit over the condom sleeve. It'll compress the condom enough and actually provides a nice tight fit. Once it's all put together just poke a hole in the condom with a small screwdriver.....works great and is tight enough to allow for easy turning of the juice control. The main advantage of this over the silicone cap method is that the condom is in contact with the sleeve over it's entire length making it a much firmer and stable assembly....

Geez it was hard to stop laughing at some of the points in this description....

feel like a big man now pokin holes in condoms?

 

[fordski]

are you proud of yourself?

feel like a big man now pokin holes in condoms?

Haha, not after admitting my condom was too large...


Sent from my iPad using Tapatalk HD

 

[dasfast]

Where do you get these fantastic toys?

Sent from a message in a bottle.

 

[upsetter21]

Poland:
Discussion: Upgrade Nautilusa | Kopie / Klony | E-papierosy-forum.pl - najwi
List: Zaloguj | E-papierosy-forum.pl - najwi

Looks like we all have the Drip Tip adapter figured out. Nice photos Deez! I'm also spreading the word about how this same trick works with a Tobeco Oddy clone MP/Chimney to convert a Terminator/Nautilus to be drip tip enabled.

The long NautyFun Chimney or Mouthpiece lets you build 3 tank sections for massive juice capacity! In that mode it has "Road Trip" written all over it. Yes, I used to have a problem "Dripping & Driving".

 

[misterD]

wanted to thank deezdrama for taking all these pics and coming up with this tutorial making me want this kit even more so. also wanted to blame him for that cos this is going to be a looonnnggg wait............

looks like they're working on #163 now so theres 100 peeps b4 me at the moment

 

[Barton]

Just out of curiosity where can this be ordered from ?

Or is it get on a list and wait forever type of item ?

 

[deezdrama]

The list is linked 2 posts above, its a polish site.

You have to registero the site and then the link will work, google translation or google chrome helps.

You quote the list and just add your name to it in the same format, when your kits ready he will pm you with payment info... he speaks english

Total time is probablly 1-2 months.

I think im #231 on the list but I got lucky and received one on a trade.

Vaped through a whole tank of hhv georgia peach tobacco on a cotton micro coil, its been performing great!

Basically its sorta like a get on a list and wait forever type of thing.

 

[ktombs1]

wanted to thank deezdrama for taking all these pics and coming up with this tutorial making me want this kit even more so. also wanted to blame him for that cos this is going to be a looonnnggg wait............

looks like they're working on #163 now so theres 100 peeps b4 me at the moment

# 163 has shipped

 

[deezdrama]

Just get a kayfun lite to tide you over

Ive been on a complete ocd overspending spree and need to quit now...

First the mkb-ts, ggts base and term-c.... couldnt get the term c to stop leaking so got on this list.... couldnt wait that long so ordered a kayfun lite and a couple provari rings, kayfun is taking forever to get here so ordered another term c to trade for one of these kits, then discovered cotton in a microcoiled dripper so now have a reo grand/ era on its way to me, then ordered some 28g kanthal and 10 more bottles of juice to go with all this stuff.

Im done for a while, I have to be, im done, im done, ....

Crap I need some new 18650's :-/

wanted to thank deezdrama for taking all these pics and coming up with this tutorial making me want this kit even more so. also wanted to blame him for that cos this is going to be a looonnnggg wait............

looks like they're working on #163 now so theres 100 peeps b4 me at the moment

 

[deezdrama]

I will say... this kit has made my term a whole new animal, and the juice control feature works great (something the kayfun lite doesnt have, nor air control)

Hopefully my kayfun lite will be in my mailbox this upcomming week to compare

 

[misterD]

thought I was doing bad... I got myself a kayfun 3.1 and I do like how it vapes but I think it might work even better with juice control so Im on the list for 2 of them. think Im #265

Just get a kayfun lite to tide you over

Ive been on a complete ocd overspending spree and need to quit now...

First the mkb-ts, ggts base and term-c.... couldnt get the term c to stop leaking so got on this list.... couldnt wait that long so ordered a kayfun lite and a couple provari rings, kayfun is taking forever to get here so ordered another term c to trade for one of these kits, then discovered cotton in a microcoiled dripper so now have a reo grand/ era on its way to me, then ordered some 28g kanthal and 10 more bottles of juice to go with all this stuff.

Im done for a while, I have to be, im done, im done, ....

Crap I need some new 18650's :-/

 

[tagster]

thought I was doing bad... I got myself a kayfun 3.1 and I do like how it vapes but I think it might work even better with juice control so Im on the list for 2 of them. think Im #265

I would have got the Kayfun 3.1 too but I need the juice control.

 

[villarino1k]

To those who have the kit already. Any leaks coming from the 510 pin when mouthpiece is open? Can you open it a few turns without leaks?

 

[deezdrama]

I have mine open up quite a bit, probably 4 full turns, or about half of the juice channels exposed to juice... no leaks or gurgles at all... I did have your problem with the regular term-c though and nothing fixed it and it drove me nuts.

Are your wicks covering the juice supply holes?
I have a very small cotton wick (probablly 2mm) on a microcoil, I just made sure to sit my wicks down and have them lay across the holes to cover them up.

Do you have gurgling as well?
I would check your orings and put vaseline on them.


I did have a tiny bit of gurgling this morning from leaving the mod on its side overnight, but just closed juice control untill it started to taste dry.... beens good since, no juice leaked though... just a tiny bit of gurgle I think from wick being oversaturated

 

[fordski]

# 163 has shipped

Cool, mines 168 but I haven't received a payment request yet....

 

[deezdrama]

Hmmm, might be a good idea to pm vouchu or whatever his name is... he speaks english I was told.