The Lemo RTA: A Build With Pics

[Dobo]

I think eleaf just dropped a bomb!

Eleaf LEMO 2 Review On TVC

The only thing to address, IMHO, is a way to remove deck without emptying the tank.

 

[Dobo]

Lemo 2 is only a pre-order right now:

Eleaf Lemo II Rebuildable Atomizer Kit - 3.8ml, Silver

1. Convenient air adjustment
2. Top side filling
3. More fluent airflow, bigger vapor than LEMO

 

[skyboxer1968]

I think eleaf just dropped a bomb!

Eleaf LEMO 2 Review On TVC

The only thing to address, IMHO, is a way to remove deck without emptying the tank.

I was thinking that too, but I don't do anything but refill for 2 weeks at a time. When you don't get dry hits the wick lasts forever.
I'm excited!

 

[Dobo]

Comparison pictures:

 

[BNEAT]

Glad I didn't order a Goblin yet, this looks promising

 

[BNEAT]

I think Eleaf just dropped a bomb!

Eleaf LEMO 2 Review On TVC

I wish people wouldn't criticize the original Lemo for being 23mm without pointing out WHY they made it that size to begin with.

 

[Dobo]

I'm using my Lemo with DNA40 chip and Ni200 wires and sometimes I really need an access to my build deck after filling (to fiddle with wicking, etc.).

I was thinking that too, but I don't do anything but refill for 2 weeks at a time. When you don't get dry hits the wick lasts forever.
I'm excited!

 

[Dobo]

I have no idea why they made it 23 mm, can you please clarify the reasons? Thanks.

I wish people wouldn't criticize the original Lemo for being 23mm without pointing out WHY they made it that size to begin with.

 

[BNEAT]

I have no idea why they made it 23 mm, can you please clarify the reasons? Thanks.

It was made to fit hybrid style on the eVic Supreme. Which, in my opinion, is one of the best connection designs in all of vaping. Too bad it didn't catch on.

edit: maybe if Provape would've copied the eVic/Lemo design instead of that idiotic P3 connection, the archaic 510 would be a thing of the past!

 

[MidwestGuy]

Oh geez... I want three now. New Lemo improving on the original design, but still sticking to the basics that made the original awesome. I can't wait for this one to become available!

My only slight concern is the now truly floating 510 connection in the base. If your DNA40 mod doesn't push up hard enough on that thing, there may be some connection issues/floating resistances ...

 

[WeirdWillie]

I think Eleaf just dropped a bomb!

Eleaf LEMO 2 Review On TVC

The only thing to address, IMHO, is a way to remove deck without emptying the tank.

Emptying the tank to me is not an issue, that my friend is just a necessary evil to insure you get proper wicking and ultimate flavor delivery, while retaining optimal juice capacity.

I don't like the 2 piece bottom, just another point for potential connection issues, Eleaf needs to get away from using that.
Unlike the Lemo that was purposely built for the for the Evic supreme for hybrid mode, there is no need for a 2 piece bottom on on the Lemo 2
Also I'm not too sure on the air flow slots if it's going to sound like a tin whistle like the Delta2 I have does, man I've filed and polished trying everything to get the whistling to stop with that thing.

 

[NCCTC]

It was made to fit hybrid style on the eVic Supreme. Which, in my opinion, is one of the best connection designs in all of vaping. Too bad it didn't catch on.

It sure caught on here.



(too bad my phone camera sux)

 

[Dobo]

How do you know it's floating? It looked to me just like Delta II 510 connector, which, on the side note, doesn't work well with rDNA40 floating pin.

My only slight concern is the now truly floating 510 connection in the base. If your DNA40 mod doesn't push up hard enough on that thing, there may be some connection issues/floating resistances ...

 

[MidwestGuy]

How do you know it's floating? It looked to me just like Delta II 510 connector, which, on the side note, doesn't work well with rDNA40 floating pin.

I don't know for sure... sorry I should have mentioned that. I'm basing this off of what I saw in the TVC review video. It looks like a post that isn't screwed to anything/is held in by an insulator grommet.

 

[Dobo]

It really looks like the Delta II 510 pin, which is not floating. This is also based on my observation of TVC review. Hope it will work well with rDNA40, as I'm definitely buying one.

I don't know for sure... sorry I should have mentioned that. I'm basing this off of what I saw in the TVC review video. It looks like a post that isn't screwed to anything/is held in by an insulator grommet.

 

[skyboxer1968]

At around 7:36 in the video he shows the pin and it looks to move when he presses with his fingernail. Is that what you mean? Is that an issue?

 

[BNEAT]

It sure caught on here.

View attachment 420381

Same here, I still use mine. Not as much as I did before I got my DNA40, but I still use it. I wonder what Joyetech's answer to temp control is going to be like?

 

[Dobo]

Just re-watched the video and he says at that moment that "Seems pretty stable there". I assume it's not moving up and down.

And it looks like it's protruding quite a bit.

At around 7:36 in the video he shows the pin and it looks to move when he presses with his fingernail. Is that what you mean? Is that an issue?

 

[BNEAT]

I don't know for sure... sorry I should have mentioned that. I'm basing this off of what I saw in the TVC review video. It looks like a post that isn't screwed to anything/is held in by an insulator grommet.

Looks like a floater to me, too

 

[puffon]

At around 7:36 in the video he shows the pin and it looks to move when he presses with his fingernail. Is that what you mean? Is that an issue?

Yes.
Could be, with nickel.