- Status
"got one off the classies"
tried numerous genesis setups, hybrids, whathaveyou. my mac 350 is by far my favorite. everything about this mod is super CLEAN, low profile (almost same exact height as my zen mini) and hits like a champion. got the newest run and its got nice brass contacts. the button has a great feel and perfect throw, liking the pocketfriendlyness of the recessed button, no misfires yet either. this is for sure a keeper in my collection.
tried the dual coil dual wick.. only way i could really get the ohms on each wick high enough was using 32gauge, and im so used to the 28g i feel almost weird using it... any suggestions for coils on a dual wick+coil setup? i was getting one wick and coil to glow nice, but the other wick coil was kinda lagging behind it or not glowing as bright. maybe should use just one piece of kanthal and start at the positive and use peter k method ? i tried just wrapping one at a time.
just sed f it and rocked my usual 1.0ohm 5/4 28gauge on a fat solid double wick - i use the ones that ship with zen mini--wrap another piece of ss mesh on top of it--wicks ridiculously well never get a dry hit even holding it vertically, i dont have macs 'long lungs' but you get the point.
tried numerous genesis setups, hybrids, whathaveyou. my mac 350 is by far my favorite. everything about this mod is super CLEAN, low profile (almost same exact height as my zen mini) and hits like a champion. got the newest run and its got nice brass contacts. the button has a great feel and perfect throw, liking the pocketfriendlyness of the recessed button, no misfires yet either. this is for sure a keeper in my collection.
tried the dual coil dual wick.. only way i could really get the ohms on each wick high enough was using 32gauge, and im so used to the 28g i feel almost weird using it... any suggestions for coils on a dual wick+coil setup? i was getting one wick and coil to glow nice, but the other wick coil was kinda lagging behind it or not glowing as bright. maybe should use just one piece of kanthal and start at the positive and use peter k method ? i tried just wrapping one at a time.
just sed f it and rocked my usual 1.0ohm 5/4 28gauge on a fat solid double wick - i use the ones that ship with zen mini--wrap another piece of ss mesh on top of it--wicks ridiculously well never get a dry hit even holding it vertically, i dont have macs 'long lungs' but you get the point.
If you want to do dual coils I would suggest trying a U wick with .5 Kantal D ribbon wire. I seem to have more luck with the ribbon wire. Plus that gauge is more likely to get you to 1.0 if you do 6 wraps on each leg of the wick.
What is the best solution if you run a single wick in stopping the juice from flying out of the tank when needing a tilt?
I throw the excess wick that I snip off in the second wick hole on my 350 (I always roll an extra cm). I also tried using some XC-116. It's still going to leak when on its side but it helps.
I'm interested to hear other solutions too.
Well all my holes are filled. Screws in all unused holes? That doesn't sound any better. All the holes are threaded.
Not seen Mac for a while. 
Here's a pic of him so we don't forget what he looks like.
Mac's the 1 on the left.
Here's a pic of him so we don't forget what he looks like.
Mac's the 1 on the left.
That a Mac 650/500 right? The atty deck on my 350 doesn't have threaded wick holes like my big one.
Last edited:
Hey, SantaNot seen Mac for a while.
Here's a pic of him so we don't forget what he looks like.
Mac's the 1 on the left.
Yeah that's right. Now I kinda want the 350 version. Will the 350 version take the 490 and 650 tubes?
Yes it does
the throw can get pretty short or long (can't remember which way) but you can adjust with washers to make it work.
tried u-wick, didnt have much luck couldnt get the coils on how i want them with my 28gauge.. ordering some ribbon kanthal from cov (Thanks Dan). buuut i did get it to work nicely with just two wicks. check it out:
.8-.9ohms or so its a fresh coil itll end up at around 1.0-1.1 after awhile.
no hot spots ! a testament to how great the mac is, great positioning of elements on the atty deck.
its not crazy high amps.. like 5.3 or something....
still safe for the 18350s, they just dont last very long pushing those coils, maybe like 3 hours max on a full charge.
no hot spots ! a testament to how great the mac is, great positioning of elements on the atty deck.
its not crazy high amps.. like 5.3 or something....
still safe for the 18350s, they just dont last very long pushing those coils, maybe like 3 hours max on a full charge.
Last edited:
Anywhere besides 310 to get glass tanks for the 350? Getting tired of staring @ the "Out of Stock" that they are known for... Moreso, staring @ the 350 with a tank that looks like it is about to explode..
donno but i just baught some pluid from 310.
hopin mac brings some extra quartz and tubes to vapebash WINK WINK
hopin mac brings some extra quartz and tubes to vapebash WINK WINK
anyone see the black and gold mac in pbusardos vid? Im wondering if that has been released or is it a special edition of some sorts!
New to the thread hi!
New to the thread hi!
more mac eye candy.
this time got some ribbon kanthal. RIPS CLOUDDDSSSSSSS. mac, again, best hybrid out there.
check description for info.
this time got some ribbon kanthal. RIPS CLOUDDDSSSSSSS. mac, again, best hybrid out there.
check description for info.
Hey all. Got an issue I am hoping I can get some advise with. Have the Mac 350. I have a max voltage reading of 3.2 v on brand new batts. Also my switch gets very hot when pushed. I have had this happening since I got it. I would like to use my Mac. But this is a problem. No shorts on the wick and this is not my first genesis rodeo. I have a sneaking suspicion is have something to do with the switch.
- Status
Similar threads
