The REACTOR Atomizer Tank!!!

[Killjoy1]

debook, here's to hoping the fire works out to be nothing more to you than a light show in the distance. I can't imagine being that close to something like that



The Reactor is working out pretty nice. I look forward to single coil attys being available for it, but the dual coil that's in there is a good vape. Overall this thing is awesome
I'm working my way through different consistencies of juice and so far the thickest one (BB) doesn't work so great, it gets air-locked and stops feeding after only a couple hits and popping the top off and on is about the only way to get it to feed again. Switched to something a little bit thinner and it's working pretty good, though I do occasionally have to dry hit it to fill the atty back up, but only occasionally. Next up will be one of my 50/50 DIY mixes (which is the thinnest juice I usually vape), but I like the current juice so much I just keep on refilling

 

[debook]

Just got back from dropping my daughter off in CO Springs, about a 4 hour round trip. Tank worked really well the entire trip, didnt have to pop the top off except to fill halfway through.

I am looking forward to higher ohm dc attys if they will have them. I like fruity mentholated stuff at LR, darker stuff at higher voltages.

 

[debook]

Here's the view from my driveway this evening...View attachment 107742

 

[hellsh0cked]

Wow, that Reactor tank produces more vapor than I thought, almost looks like you got a forest fire going on.
I hope they get it under control soon and the winds remain favorable for you. I hope you and yours continue to be safe.

Here's the view from my driveway this evening...View attachment 107742

 

[debook]

Lol...probably what it looked like at Vapestock.

 

[Andy Thatcher]

Nope, definitely more vape in Florida this weekend

Sent from my MB860 using Tapatalk 2

 

[Tasiamay]

Got my 2 Reactor tanks. Both are working great so far - nice, clean vape and no leaking!

My two tubes seem to be slightly too short. The atty sticks out the bottom just enough passed the threads that the tanks won't sit flush on the PV. Not a deal breaker, but a bit annoying aesthetically.

Will you guys have spare tubes available down the road?

 

[Pete54]

Got my 2 Reactor tanks. Both are working great so far - nice, clean vape and no leaking!

My two tubes seem to be slightly too short. The atty sticks out the bottom just enough passed the threads that the tanks won't sit flush on the PV. Not a deal breaker, but a bit annoying aesthetically.

Will you guys have spare tubes available down the road?

Is the top of the atty pushed past the top o-ring? It's hard to tell with this design but it sounds like maybe you have the atty pushed in just enough to make contact with the upper o-ring. You need to carefully move it past the o-ring. It's a bit worrisome doing this without having a drip tip on the atty because the edge could cut the o-ring. You could leave it the way it is but I believe that would adversely affect the vacuum.

 

[Tasiamay]

Is the top of the atty pushed past the top o-ring? It's hard to tell with this design but it sounds like maybe you have the atty pushed in just enough to make contact with the upper o-ring. You need to carefully move it past the o-ring. It's a bit worrisome doing this without having a drip tip on the atty because the edge could cut the o-ring. You could leave it the way it is but I believe that would adversely affect the vacuum.

Thanks Pete! I'll take a look and see. Everytime I push the top on the atty comes out slightly. I haven't had any issues with either tank with the atty poking out a bit, but next time I top off I'll make sure.

 

[cuseguy]

Is the top of the atty pushed past the top o-ring? It's hard to tell with this design but it sounds like maybe you have the atty pushed in just enough to make contact with the upper o-ring. You need to carefully move it past the o-ring. It's a bit worrisome doing this without having a drip tip on the atty because the edge could cut the o-ring. You could leave it the way it is but I believe that would adversely affect the vacuum.

Perfect explanation Pete!

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

 

[dirquist]

Just joining the club. Mine was shipped today so hopefully by the end of the week Ill share my impressions on it also. I sure hope there isnt a gap between the device and the tank though as Im crazy picky about funky looking connections like I saw in one video. I like the way my cartomator tank sits so I hope its similar.

 

[Pete54]

Just joining the club. Mine was shipped today so hopefully by the end of the week Ill share my impressions on it also. I sure hope there isnt a gap between the device and the tank though as Im crazy picky about funky looking connections like I saw in one video. I like the way my cartomator tank sits so I hope its similar.

It sits identical to the Cartomator. They both share the same bottom cap. the rest of it is magic!

 

[x GRE x]

I used my tank all weekend with no troubles. Today I took it to work and got the leaking that I have been hearing about from others. It is definitely coming from between the tank and the outside of the atty. I haven't removed the atty from the tank yet so I thought it couldn't have gotten ripped up. I got home and took it apart, no nicks in the o-ring like I thought. I dried the o-ring and filled it back up and it seems to have seated again. I have no idea why this has happened but to everyone having leaks it may just be a matter of wiping your o-ring off and trying again.

 

[DjCaptainKiddo]

I just got my tank in an hour ago. Got her filled up and she rips like a freight train. Loving the look and feel of this tank. The flavor is good and vapor production is out of this world. It is a bit pricey but i would recommend this thing to anyone. i may be purchasing another one in the near future. Thanks Nhaler.

 

[DCB305]

I used my tank all weekend with no troubles. Today I took it to work and got the leaking that I have been hearing about from others. It is definitely coming from between the tank and the outside of the atty. I haven't removed the atty from the tank yet so I thought it couldn't have gotten ripped up. I got home and took it apart, no nicks in the o-ring like I thought. I dried the o-ring and filled it back up and it seems to have seated again. I have no idea why this has happened but to everyone having leaks it may just be a matter of wiping your o-ring off and trying again.

Could it be due to the heat, when in use, causing expansion?

 

[Drewsworld]

Be sure that the bottom of the atomizer is seated level with the bottom of the TANK...NOT the slot...The slot is slightly recessed and can cause it to leak some if in too far...Also I wouldnt recccomend leaving these in the car full... Temperature changes from air conditioning to heat can cause issues as well...I had one leak some the other day after it sat inside for several hours and went into the heat...Not alot of profuse leaking or anything but I did notice a sweat of liquid on my device.
Drew

 

[Drewsworld]

Just updated the inventory of these with a few colors and styles...Not alot just a few! Thanks
Drew

 

[dirquist]

Just updated the inventory of these with a few colors and styles...Not alot just a few! Thanks
Drew

Edit, Nevermind. I see the drop down does not correlate with the #'s in the pics. I really like the green and purple. Oh well, my red one is already on its way

 

[Matt815]

I got mine yesterday. I like it a lot!!! the draw is a bit airy and a little loss of flavor, but it is the best tasting tank in my opinion. I cant stand cartos at all.

 

[Sense Field]

Got my replacement tank today...works much better so far. Only been in use for 45 min but no leaking so far.