Happy Fourth Vapersary and congrats papaw! [emoji2][emoji322][emoji106]
Sent from my iPhone using Tapatalk with my paws
Rachel
Sent from my iPhone using Tapatalk with my paws
Rachel
The Reonauts new lounge
- Thread starter Sterno
- Start date
- th_trl_thread_readers 0
- Status
Happy 4th PapawB... I used to hate going somewhere to make a pick up and was held up 30-45 min. so I could only imagine the displeasure you are feeling right now...
definitely try the easy squeeze bottle! Just make sure that the top is screwed on correctly, not as simple as you might think. Tightened all the way down. Then...... pinch the tube, and squeeze the bottle. You should not hear anything. If you hear gurgling, or hissing or any kinda noise, redo the cap cuz it's not on right or not fully tightened. then you'll have absolutely no leaking from the bottle.
Too funny! I just now understood your instructions, after having read them about 20 times in various places. Each time before, I envisioned the tube on the connector thingymabob in the mod. Couldn't for the life of me figure out how to squeeze it!definitely try the easy squeeze bottle! Just make sure that the top is screwed on correctly, not as simple as you might think. Tightened all the way down. Then...... pinch the tube, and squeeze the bottle. You should not hear anything. If you hear gurgling, or hissing or any kinda noise, redo the cap cuz it's not on right or not fully tightened. then you'll have absolutely no leaking from the bottle.
I wonder about me, sometimes...
Woo Hoo!!
I haven't gotten that far.definitely try the easy squeeze bottle! Just make sure that the top is screwed on correctly, not as simple as you might think. Tightened all the way down. Then...... pinch the tube, and squeeze the bottle. You should not hear anything. If you hear gurgling, or hissing or any kinda noise, redo the cap cuz it's not on right or not fully tightened. then you'll have absolutely no leaking from the bottle.
I felt like it was a major accomplishment of the day that I got the tube in the dang bottle.
Course it went in MUCH easier once I put some e-liquid on the tube.
I'm going to wait until my original bottle needs filled and swap em.
Any hints on getting it on the ?? nipple thing??
...I'm just glad no one was around to see me fighting with that tube...pre-juice lube.Too funny! I just now understood your instructions, after having read them about 20 times in various places. Each time before, I envisioned the tube on the connector thingymabob in the mod. Couldn't for the life of me figure out how to squeeze it!
I wonder about ME too!!
We should meet up sometime.
See what kinda trouble we can get ourselves into.
I can just imagine! Lemme know if you're ever in or around D.C. I know lotsa ways to get into trouble ... I can do it by just reading ecf!...I'm just glad no one was around to see me fighting with that tube...pre-juice lube.
I wonder about ME too!!
We should meet up sometime.
See what kinda trouble we can get ourselves into.
I just ordered the other half of the parts that I wanted, plus some of the other things I had crossed of the list. I still did not order the 510 connectors, but next order I will get a few of them. Some of the things, I don't think I will need to order again, but I would like to get more springs, I think I am almost there with my REO stockpiling of parts.
KAS
KAS
Will DO!!I can just imagine! Lemme know if you're ever in or around D.C. I know lotsa ways to get into trouble ... I can do it by just reading ecf!
I have a list, I'm letting it rest a couple days in case I think of, or read something else I want to add.I just ordered the other half of the parts that I wanted, plus some of the other things I had crossed of the list. I still did not order the 510 connectors, but next order I will get a few of them. Some of the things, I don't think I will need to order again, but I would like to get more springs, I think I am almost there with my REO stockpiling of parts.
KAS
Course, it never fails, I always think of something after the fact.
too funny! I always take the bottle off to fill it. Just so much easier that way. Plus the more you take it on and off, the easier it is to do that. But I haven't had mine stretch out too far at all.Too funny! I just now understood your instructions, after having read them about 20 times in various places. Each time before, I envisioned the tube on the connector thingymabob in the mod. Couldn't for the life of me figure out how to squeeze it!
I would say just squeeze some juice through the tube so the inside is lubed. I hold it up close to the top of the tube, and I kinda lay my mod down (still in my hand though) so I can see the nipple. It will be a lil difficult to get on the first time or two, but you'll get it. I have lousy hands so if I can get it on there, probably anyone can with enough patience or determination lol
me too! me too! are ya anywhere near Texas?? If we could all meet the 3 of us would have a blast! I've been wanting to meet my birdy so bad for a long time. I came close to it, but t'weren't meant to be at that time I reckin.We should meet up sometime.
See what kinda trouble we can get ourselves into.
That's how I got the one that came with it on. Didn't know if I'd done it properly, so I'll do the same with the softer bottle.too funny! I always take the bottle off to fill it. Just so much easier that way. Plus the more you take it on and off, the easier it is to do that. But I haven't had mine stretch out too far at all.
I would say just squeeze some juice through the tube so the inside is lubed. I hold it up close to the top of the tube, and I kinda lay my mod down (still in my hand though) so I can see the nipple. It will be a lil difficult to get on the first time or two, but you'll get it. I have lousy hands so if I can get it on there, probably anyone can with enough patience or determination lol
me too! me too! are ya anywhere near Texas?? If we could all meet the 3 of us would have a blast! I've been wanting to meet my birdy so bad for a long time. I came close to it, but t'weren't meant to be at that time I reckin.
. Thanks for explaining all that!!I'm about 45 minutes outside of St. Louis, to the S and E, in IL, surrounded by corn and soy beans.
Well, not literally. We would have a blast!!!
Off to get some breakfast. Workday today, I work PT (M,W,F normally.
). Three day weekend ahead!! 
Here's an update on my project of vaping REOs only. If you recall, I put everything away and was going to vape only REOs for a week. More specifically, just one REO. How did it go?
Well, it was largely successful. I was reminded about the simplicity of the REO and how easy it is to maintain, switch flavors and the "no need to worry" feeling I had when out and about. The REO is brilliant on so many levels!
But, I did break down and pull out the Billet Box. It, too, is simple and very hardy for being away from home...plus, the size and having everything all contained, fits my needs.
In the end, I learned that the REO is a must have...it is my quarterback. The Billet is the perfect, nice to have. And, everything else is just superfluous!
Sent from my iPad using Tapatalk
Well, it was largely successful. I was reminded about the simplicity of the REO and how easy it is to maintain, switch flavors and the "no need to worry" feeling I had when out and about. The REO is brilliant on so many levels!
But, I did break down and pull out the Billet Box. It, too, is simple and very hardy for being away from home...plus, the size and having everything all contained, fits my needs.
In the end, I learned that the REO is a must have...it is my quarterback. The Billet is the perfect, nice to have. And, everything else is just superfluous!
Sent from my iPad using Tapatalk
So you're NOT coming for breakfast?...
I'm about 45 minutes outside of St. Louis, to the S and E, in IL, surrounded by corn and soy beans.
We would have a blast!!!
Off to get some breakfast. Workday today, I work PT (M,W,F normally.
P67 and smooshy bottles arrive today! The question is, Will the postal worker come early or late?
My two favorite mods, as well. I hadn't shown the Reos and love for months, then picked one up again, a couple of weeks ago. That's all it took! Two spectacular mod makers; two wonderful options. Life is good.
I haven't used the RM2 since I got the Chalice a month back or so. Cleaned it up, dry burnt, and re-wicked this morning. It's a great vape. Chalice all cleaned up in preparation for my new arrival.
My two favorite mods, as well. I hadn't shown the Reos and love for months, then picked one up again, a couple of weeks ago. That's all it took! Two spectacular mod makers; two wonderful options. Life is good.
I was looking at my bookshelf, or more accurately, mod shelf yesterday, and I realized that I hadn't vaped my first REO and RM4 atty in quite a while; what with my newer attys, P67s, Woodvils, and all. My very first REO purchase, 2 years ago, was a black ano Grand, and an RM4. I did send it in last year for the 510 upgrade; but I don't think I'd used it since. So I got it out, coiled the atty up with a dual 316L ss set up, wicked it up, and WOW!
It just doesn't get any better.
Good Morning Reonauts from Westminster SC. And special thanks to all the well wishes from yesterday.
My first Two is but a distant memory for me - a silver anodized mini.
About two years in I "upsized" from Mini's, Mini 2.1, and mini Woodvil to Grand, VV Grand and Woodvil.
But REO mods are still the only mods I use. I still have two pro-things gathering dust. Maybe someday I will post them on the Classifieds...
Have a Safe and Blessed Day
My first Two is but a distant memory for me - a silver anodized mini.
About two years in I "upsized" from Mini's, Mini 2.1, and mini Woodvil to Grand, VV Grand and Woodvil.
But REO mods are still the only mods I use. I still have two pro-things gathering dust. Maybe someday I will post them on the Classifieds...
Have a Safe and Blessed Day
- Status
Similar threads
