I love me some old blues. I'm studying jazz at the moment. I have a fair amount of technical ability from 14 years of playing bass, but my musical vocabulary is abysmal. Studying jazz is proving fun and a great way to really "learn the fretboard" and the theory. Plus, I just love jazz.
that's kewl. Love me some jazz! All types.
My very first guitar was a 1960's Fender music master like this one. I really miss that old guitar. I let a "friend" use it for awhile, and never got it back.
so sorry that happened.
Loved all the guitar pics folks put up
Anyone know if those 10ml Cappy bottles fit the 2015 woodvil? I swore I'd never get one because they're insanely priced, but I'm considering it now that I've found a
juice that will likely not ever leave the woodvil.
Now that I"ve seen a pic someone posted in the 10 or so pages I was behind
I do see that these have that silicone seal. Is that the big draw to these over the FIBs rob sells? Or is there something else? I've always said I have zero leaking issues with the FIBs, but yesterday I did have an issue with one bottle, so I put it in time out til I can investigate and get it's heart right about that.
For those of you who have the O-16 clone or the authentic, I ordered and received these set screws from McMaster carr. They are the same as the one's in my clones, and should also be the one's for the authentic. I got the extended dog screws, M3 X 3mm.
McMaster-Carr
ok......you know Imma idiot when it comes to these things.....but the link you put up showed a buncha screws. Doubtful I'll get an 016, but just in case I ever do, can you post a link to the specific one pleasey please. Several said extended, but none of em said anything bout being a dog.
Also, does bolt depot carry them by chance?
Bolt Depot - Nuts and Bolts, Screws and Fasteners online They usually have better prices and a bit better shipping.
When I ordered from Mc Master, I didn't see any shipping options, I probably just missed them, but the pack of 25 shipped "next day" for $9.54 w/tax total.
They seem a bit arbitrary with their shipping. The one time I ordered from them it was because I wanted derringer and nuppin screws, and bolt depot only had one of them, not the other. I called em (or maybe emailed, don't recall) cuz the no shipping thing confused me. They don't tell you what it is. I reckin they're used to folks buying 100's of $ or maybe more of stuff and they aren't as concerned about shipping. They said small things usually run between 6.00 and 10.00 for shipping. I really didn't like that answer but they ended up charging me 6.00ish
This is another useful alternative for screwing. You'll like it.
I got a similar set at harbor freight. It only has a few hex bits, but seems to have the ones I need.
I'm setting on 25 screws that I will probably never use!!
So if I ever get one, maybe I'll
buy some from you
Law of Slothdom: if a Sloth has spare screws a sloth never loses the originals. If a Sloth has no spares, all the originals are lost.
^Truth.
I've long suspected it, but now I am certain...........we're all sloths!!
Throttle" data-source="post: 18971061"
class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">
that made me giggle
I just had a problem with McMaster Carr
The screws on the web site were about $4.25
My final bill they sent for approval was $4.25
This morning after they shipped they added another $6.00 for shipping.
I yelled alot and they dropped the shipping charge
kewl, I didn't yell and paid the 6.00 cuz I knew about it from having contacted them ahead of time, and I was glad it wasn't 10.00
X-Mas Greetings from Vienna to all
View attachment 623245
love yur new avi and banner thingy
Not sure if this is in the right place.. although I finally found the reonauts lounge. Anyone have the reomizer 9 or a vector? I found the authentic vector online for about 30 bucks and I have the reomizer 9. I was wondering if I could possibly switch out the center posts so I could have an authentic bf vector.. the rm9 is great but would like a backup
welcome!! Never used one, so dunno........but just wanted to welcome ya to the lounge.
Sounds kinda selfish but they pretty much have you by the short and curly's on these... Where else are you going to find this screw that cheap? I sold fasteners for almost 30yrs and I can tell you that their price with shipping is about $50 cheaper than any metric house in the country. You can buy cup point metric all day long, but dog point is like finding a needle in a hay stack in a quantity of 25!!!
Jup. LIS bolt depot was a lot cheaper......like on the one they had, I could have gotten 100 for less than what MC charged for 25, but they didn't have the other one. I'd never need 100, but figgered I could toss 10 or so in an envelope to a few folks if they needed em. But they didn't have the other one I needed, and I wasn't paying shipping from 2 places.
Up here, bad traffic means waiting for 3 cars to pass before turning left.
used to be that way here but no more. This area used to be small Texas town paradise, but it's all been built up so much in the last 10 yrs.
but not nice like Palm Springs,
My granny used to live in palm springs. I got to visit her once but I was only 4 or 5 so I don't remember
but the fact remains...it won't or rather can't drain completely and in my book its a leaker!!
I do have that issue with the Rm8 but like someone else said, I rarely go anywhere with em. But my son's phone smelled really good last time he was in the hospital. While leaving, I was pushing his wheel chair, so asked him to hold it. Forgot to tell him to hold it upright and it musta had a fresh squonk in it when they told him to git (yes I vaped for 3 days in his room and they never knew)..... he laid it down on top of his phone on his lap.
Top air attys would be a good solution, for those who carry mods around in their pocket, or are always tipping them. Unfortunately, there aren't many good ones. About the only ones I like are the Maker, Manta2, and the Thump. I didn't care much for the Rogue.
jup that was one thing I loved about the nuppin. anyone make a postless nuppin with derringer airflow? and I only heard 1 or 2 folks say they did like the rogue. One lady that used to come to the lounge liked em, but can't recall who it was. Quite a few folks who used to come in there never made their way here...
and I only have to wick my coils once every 6+ months or so. They can be dry burned with RxW in place...
so, since a sweetie sent me some to try, how ezactly do ya know when to replace the rxw? does it just start tastin funny? I am enjoying not having to take it out and put new in like with cotton. As to flavor......I think I like kgd a bit more, but this isn't bad at all. It does speak to the lazy in me.
did a search for this on their site but it said "we never heard of the stuff" I'm paraphrasing. What's the flavor profile of this?
Just a word of caution,
I ordered a few things off gearbeast because I wanted to try the clone before I dropped the coin on the real deal (lovin the charm). My order came to $112 and $35 shipping. They were nice enough to take over a month to deliver and split my order in 2 shipping bags (5 items in one bag and 1 item in the second) even though I requested all items in one box. Got the stuff, had to scrap the Narda because the squonk pin would only grab by a half a thread and messed up the positive plate in the RDA. The other RDA I got specifically for squonking didnt even come witha squonk pin like it said it would. I do like the Coppervape tho. I got a notice from Fed Ex saying I had to pay an additional $29 for the first box and $21 for the second box! Are you kidding me?! Thats the last time I ever order anything overseas again. I should have just ordered the Charm from Vapinart.
someone on another thread had an issue with fex ex charging that fee and theirs was on prizes they'd won. They eventually got it removed, but two people had to deal for about a month I think with GB just trying to get the right prizes and get em delivered to em. It was a mess.
Hope everyone had a fabulous Christmas.
