The Reuleaux by JayBo Designs

[Kataphraktos]

DNA200 edition stopped powering up after one week. Swapped batteries, tried to charge, won't fire, so it isn't just the screen. I did not realize this only came with a 90-day warranty - I'll be asking for my money back or store credit on this one, perhaps build my own DNA200 at home instead.

 

[Carnage9270]

DNA200 edition stopped powering up after one week. Swapped batteries, tried to charge, won't fire, so it isn't just the screen. I did not realize this only came with a 90-day warranty - I'll be asking for my money back or store credit on this one, perhaps build my own DNA200 at home instead.

Building your own wont help with those problems. It's a board problem.

 

[Tpat591]

DNA200 edition stopped powering up after one week. Swapped batteries, tried to charge, won't fire, so it isn't just the screen. I did not realize this only came with a 90-day warranty - I'll be asking for my money back or store credit on this one, perhaps build my own DNA200 at home instead.

Evolv warrants board for a year. That is the most important part. Would have thought less Wismecs would exhibit the blown fuses issues since they debuted so late in the game, especially since the batteries cannot be put in backward under any circumstance but I guess there are a few rotten apples in every bushel.

 

[Kataphraktos]

Building your own wont help with those problems. It's a board problem.

Evolv warrants board for a year. That is the most important part. Would have thought less Wismecs would exhibit the blown fuses issues since they debuted so late in the game, especially since the batteries cannot be put in backward under any circumstance but I guess there are a few rotten apples in every bushel.

Thank you. I did not realize the DNA200 had issues - I have not really kept up, after RMAing a whole bunch of DNA40 boards, I lost interest.

 

[Haylon357]

After letting my mod sit the day out, I decided to go ahead and use it. If there is a problem with the display ribbon, I will find out b4 my warranty expires. I'm a chain vaping, coil making, constantly wicking , tank filling., son of a gun.

Sent from my VS986 using Tapatalk

 

[Shigura]

So I woke up a little too early on my weekend off (about as early as I do for work ). Decided to go ahead and attempt to tuck the ribbon away from the fire button. I'm amazed on how easy it was to do this. Although my nerves were getting to me not wanting to mess anything up but its done and closed up and back to working order. Glad that's over with now I can completely enjoy this without that niggling of the ribbon.

Had to go back through the Facebook group, which is now closed but still easy to be accepted. Now for my replacement DX200 to come back to me and I'll be all set on the DNA200s.

 

[ashtrayogdc]

So this ribbon issue. Is this an issue with the RX200's also?

 

[Shigura]

So this ribbon issue. Is this an issue with the RX200's also?

Don't think so, but then again it hasn't been out very long. But at this time no just the DNA200 version.

 

[iteevision]

Happy to share that I finally got my stainless steel to work. Uploaded DJaquith's v4 profile. And the vape is exactly like my thunderhead nickel.

For whomever interested in tc with ss, do take note.


Sent from my iPhone using Tapatalk

Care to share?

 

[Haylon357]

Is there somewhere else that has a walk through of the ribbon fix other than Facebook?

Sent from my VS986 using Tapatalk

 

[AtmizrOpin]

Is there somewhere else that has a walk through of the ribbon fix other than Facebook?

Sent from my VS986 using Tapatalk

Reuleaux DNA 200 Screen Ribbon Fix Yes/No - DNA 200 Early Adopters Forum i posted the important steps a few posts below.

 

[Haylon357]

Reuleaux DNA 200 Screen Ribbon Fix Yes/No - DNA 200 Early Adopters Forum i posted the important steps a few posts below.

I missed it. Thank you

Sent from my VS986 using Tapatalk

 

[rob33]

After fixing my ribbon I took a good look and this would be a fun mod to build. Wonder how long it take fasttech to have a enclosure and battery tray, lol

 

[teyres]

 

[rob33]

a #00 phillips is what is needed, less than 10 minutes you're done. I think you can get a cheap set of precision screwdrivers at Harbor Freight for about $5, just make sure you get an #00 phillips in the set.

 

[Mowgli]

@upStomp

 

[donnah]

a #00 phillips is what is needed, less than 10 minutes you're done. I think you can get a cheap set of precision screwdrivers at Harbor Freight for about $5, just make sure you get an #00 phillips in the set.

I didn't realize we were so close.

 

[MegaVap]

So this is my first DNA200 and compared to my VS rDNA40 and VTC mini, my Reuleaux reads everything .01 lower then the other mods. I have the messed with the "mod resistance" setting using the recommended Wismec settings and a Youtube reviewer's recommended setting and still get .01 lower resistance reading. Am I messing something? Can resistance readings of atomizers be adjusted on the DNA200?

 

[Haylon357]

@upStomp

This looks like the screen is sitting on the ribbon. Am I seeing this correctly?

Sent from my VS986 using Tapatalk

 

[rob33]

This looks like the screen is sitting on the ribbon. Am I seeing this correctly?

Sent from my VS986 using Tapatalk

As the ribbon comes off its connector it is between the screen and board(which the ribbon can be removed or come off so be careful not to pull it from the board). It will loop around and go the the screen here is the problem that loop is in or very near the fire button. You are just directing the loop away from the fire button.