- Status
Apparently not for this redhead. I keep checking and it keeps showing OOS. Plus I joined the "wait list" a short time ago and I've never been notified that the 23mms were available. *sigh* I guess I will just go back and try to get my Sophia into the 22mm SnP I received today.
OK, now I'm starting to think it's personal. You are talking about domo vapor, correct? I just used my iPad in case this was a cache issue and still, 23mm is showing OOS.
*Phew* - I was starting to get a little paranoid, there.
Plus it is my fault, since I didn't see macerate's response to my first post on this on the prior page. He also said vapourart, but I missed his post entirely.
Plus it is my fault, since I didn't see macerate's response to my first post on this on the prior page. He also said vapourart, but I missed his post entirely.
Well - I am thinking that this forum is starting to cost me~! VapourArt just got my PayPal info - that's gotta be the most I have ever paid for shipping online - what happened to free shipping???
OK, another noob question - for those using the 22mm SnP with the Sophia - do you also use the ProRing?
The pro ring I believe is for provari. That seems to be what I remember in a vid.
Why does everyone want the 23mm over the 22mm as most mods are 22mm or am I mussing something here?
Oh ok, but it will overhang on most mods. I guess whatever floats your boat lol.
I would use the tapered ring for a Kayfun on a 22mm tank. Kayfun V3.1 ProVari ring - Kayfun 3.1 I have the 23mm SnP. One couldn't pry it out of my cold, dead hand. Best carto tank I ever had.
Looks Perfect on the 23mm ProVari. It's especially nice with the optional ProVari base for a clean, seamless look.
No Problem..
I'm glad you are enjoying Sophia as much as I do. I really don't try to "sell" anyone on a device. After 3 years of vaping, if I come across something that actually works well, and consistently does so, I will let folks know about it. Thanks for taking the time and effort to post here about your experience.Sophia is one that I have no issue raving about whatsoever.
Right. And it says the same on the vendors' pages as well. So I bought a ProRing along with my 22mm SnP, because I intended to use both on my ProVari.
So I get my package today from domo (super fast shipping by the way), I first swap out the top cap inner o-rings for the red ones that come with the SnP (thanks, technonut!), get the Sophia in the tank and set her up on the ProVari WITHOUT the ProRing just to see if it all connects nicely. Which it does.
I take the Tank/Sophia off, put on the ProRing, go to reconnect the tank/Sophia....and it's no bueno.
I can't thread the Sophia to the ProVari, it just keeps spinning.It looks to me like the ProRing raises the tank far enough off the top of the ProVari that in order to make the connection between the Sophia and the ProVari I had to raise the tank up higher on the Sophia. OK, fine, now there's enough of the Sophia to reach down through the ProRing and make the connection with the ProVari. I slide the SnP tank back down so it is now sitting on top of the ProRing...
And the juice control segment (where the two pieces connect) of the Sophia is now nestled smack dab in the middle of the tank's bottom cap, completely blocked.
If anyone has successfully used the ProRing with a Sophia and a ProVari, please let me know how you did it. I am completely ready to have egg on my face for missing something entirely obvious. I would rather be embarrassed as a noob than realize that I just purchased a $25 beauty ring that I can't use.
I would use the tapered ring for a Kayfun on a 22mm tank. Kayfun V3.1 ProVari ring - Kayfun 3.1 I have the 23mm SnP. One couldn't pry it out of my cold, dead hand. Best carto tank I ever had.
I don't have a Kayfun ring. I'm using my Loki Labs ring at the moment. and let me tell you, that s*#& is tight. And I don't mean that in a good way. It almost completely cuts off the airflow.
Last edited:
I was just suggesting the Kayfun ring since it is tapered to 22mm on the top. I generally use the Hippo V2 for any device which does not have it's own airflow control. It gives the ProVari three important features that ProVape will not... AF control, an adjustable pin, and a flat top.
When I use the SnP ProVari base / ring, I only need to move it slightly upwards for decent AF.
I generally use the Hippo V2 for any device which does not have it's own airflow control. It gives the ProVari three important features that ProVape will not... AF control, an adjustable pin, and a flat top. When I use the SnP ProVari base / ring, I only need to move it slightly upwards for decent AF.
I was just suggesting the Kayfun ring since it is tapered to 22mm on the top.
When I use the SnP ProVari base / ring, I only need to move it slightly upwards for decent AF.
But my real problem is that I cannot use - or at least I have not yet figured out how to use - the GP ProRing with the Sophia in the 22mm SnP tank.
I swapped the Loki Labs ring out for my $15 Tatroe ring and that's working like a champ, airflow issue solved. I also have the Hippo V2 so I could put that on and give it a go.
So while I'm content vaping along here with the ProVari+Sophia+22mmSnP setup using my Tatroe ring, I'm trying really hard not to be miffed about buying the GP ProRing just yet, and hoping that someone else here can point out what I'm missing.
- Status
