That was an experimental design and never went public. After testing and pondering it evolved into the ones shown in the link Laoboi posted.
The "WeekEnder"
- Thread starter mikepetro
- Start date
- th_trl_thread_readers 0
- Status
That was an experimental design and never went public. After testing and pondering it evolved into the ones shown in the link Laoboi posted.
Thanks all, I've had that link bookmarked for a while, but never saw any with that lip.
I think the 5600 saddle packs might be a better size
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=33220
I think the 5600 saddle packs might be a better size
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=33220
Not drop in if those are each 7.4v.
I have the 5000, 5600, and the 6000, all 3.7v and have the same size hard shell. 3 5/8" x 1 13/16" x 3/4".
So a 1/4" longer for the 510 and 3/8" thicker for the dna. Size feels good in the hand and easy for beginner modders. And me...
Last edited:
Not drop in if those are each 7.4v.
I'm pretty sure they are 1S each
I think the 5600 saddle packs might be a better size
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=33220
Yeah, I have been eying them up ever since BJ first posted about them. Pricey at $50 but you could get 2 nice Mods out of it. I just need to play around with soldering those tabs to see if it is within my skillset.
Well they are shown with a series plug and the individual packs don't have a balance port
By the thickness of each, they have 3 cells parallel per pack.
Three 1866.66666 mAh cells Strange size.
Why is each pack marked with 7.4v?
Three 1866.66666 mAh cells
Strange size.Why is each pack marked with 7.4v?
Last edited:
Here is the 6000 next to the 5000 that is getting a Groove board and a plywood fiber glass case.
Last edited:
Here is the 6000 next to the 5000 that is getting a Groove board and a plywood fiber glass case.
I want to see if the 5K is smaller
I found this on Hobby King 100-500mah Li-Poly or Li-Ion 1 cell micro USB Charger, any chance it's a good alternative to the Evolv charging board? The price is right, if it is suitable. I might just make myself a portable one cell charger for the car, or possible incorporate it into a "FridayNighter". The WeekEnder is a great design and I will build one, but something more portable/pocketable would also be nice.
It would work, but I think Evolv's is more Mod friendly. Evolv's is flatter and doesnt have those jumpers and header pins. Also, this board is mini-USB vs the the more commonly found micro-USB. But, I like the large LED on this board, it could easily be incorporated into your case design somehow, even unsoldered and remote mounted.
EDIT: The description says "micro" but the picture is a "mini". I wonder which is correct? If it is micro I might try one just because of that LED.
Setup a second Russian with a 1ohm R41. Wrapped at 2mm dia to reduce clogging. Am I the only one still using the R41? This new set up is hitting very good on my weekender Raptor at 22watts.
Setup a second Russian with a 1ohm R41. Wrapped at 2mm dia to reduce clogging. Am I the only one still using the R41? This new set up is hitting very good on my weekender Raptor at 22watts.
I'm loving 29g in my TGT's
But I need to get my Raptor put together and knock the dust off my Russian and 3.1 clone and give the R41 vertical build another go. Actually I'm going to open up the vertical channels a little bit on my 3.1 clone, just to see what difference it makes.
I'm loving 29g in my TGT's
But I need to get my Raptor put together and knock the dust off my Russian and 3.1 clone and give the R41 vertical build another go. Actually I'm going to open up the vertical channels a little bit on my 3.1 clone, just to see what difference it makes.
By vertical channels you mean the juice channels? IMO not necessary, I have to pack it tight to keep it from flooding.
Got six going with R41. From 1 ohm to 1.8ohm. If i pump the watts up it actually boils the juice back out the vertical channels and down the vertical coil. 24 watts on the 1 ohm and it becomes a squirter...
Last edited:
Rotating 3 TGTs and playing with 2 Aquas (no biggie with them, probably go into the scrap bin).
Gotta say though, the TGTs have totally weened me off the Gennys.
Gotta say though, the TGTs have totally weened me off the Gennys.
Yea, they're great, but I still like the flavor that the genny's give with certain juices.
And I would have to add the Fogger's are pretty darn good except for the occasional leaky issue.
I've been giving away genny's left and right, gave away my Fogger too with a few spare tanks. SQuape and Taifun for the win! Kayfun's for certain mods, 23mm atty + 22mm mod gives me an eye twitch.
Are 25C "Zippy" bats worth putting in a Mod? They are a good bit cheaper than the A-spec.
- Status
Similar threads
