I used Chutulu tanks for a year. I can build and wick these things in the dark with my hands tied. But I had one that would leak no matter what I did. Over and over. So I finally took a magnifing glass and found a small pin hole in the deck. As I used it the heat thinned the juice and she's pee herself.
The Womper Woom, Womp it again Sam.
- Thread starter Lessifer
- Start date
- th_trl_thread_readers 0
- Status
I used Chutulu tanks for a year. I can build and wick these things in the dark with my hands tied. But I had one that would leak no matter what I did. Over and over. So I finally took a magnifing glass and found a small pin hole in the deck. As I used it the heat thinned the juice and she's pee herself.
Ive got a really stupid thought but Im out of idea's, what mod do you use this on. if it's a long mod and you have to tilt the tank a lot to vape it, it will flood out, this tank needs to be pretty much upright. Im scraping the barrel now I know
Geez Lannie how high are those stairs LOL or did I miss your post with the number ?
Yeah must be as there is no plans on making a V2. These new laws looming certainly aren't helping matters.
Geez Lannie how high are those stairs LOL or did I miss your post with the number ?
Yea, I read that earlier today. All the places say in the carryon luggage, I want to put it in my purse. I guess that's the same thing??
If your deck is not equally seated and pushed in to the barrel, it will leak. Also, on the bottom screw on cap, make sure you have a small o ring in there. I'll take mine apart tonight and reassemble and take step by step pics.
Wow! That's sharp!Also, in other news, I love this Series VV box. Simple and hits quick!
As for the flight, I've decided to take my cheap spinner. That way, if it's confiscated, I won't care. And, I have stuff waiting that I ordered at my sister's house. YEAH BUDDY! Ok, I'm getting excited........but I need to pack......but I'm excited too. And I need to leave here by 5am to get in my 8 hours tomorrow. So, that said. Goodnight peeps. I'll be back again in around a week.
((((Atcha))) Enjoy yourself and safe journey xxxxx No idea about flying regs with vape stuff, I used to but I think it may have changed.
Sorry that took longer than I thought. Had some "things" to take care of when I went upstairs. The serial number on the bottom of the tank is 4952.
I guess I might have to do that.
Oh. Most people can't stand when I talk too much, and I've never been accused to saying too little.
I bottom-filled it yesterday, but I top-filled it today, so I've done it both ways and it puked both times. It took LONGER to puke on me today, but still... it puked.
OK, then maybe I should get my bag of spares and replace all the o-rings then? Maybe one of the ones in the tank has a cut out of it or something that's letting juice through? They all APPEAR to be there, but looking for black o-rings on a black tank is kinda hard.
Also, I don't think I have mine broken down into enough pieces. I have gotten as far as having the top cap, the bottom cap, the deck, and the bottom-middle piece that has the airflow control on it. That leaves the glass and the top bit around the top of the glass that the chimney is part of. Rixy's picture has more parts. No, looking again, I guess it's just that I haven't gotten the AFC ring off, but would there be something in there that I need to check. Isn't that just metal sliding on metal? And if I need to get it off, how does it come off?
They still had the black ones, so that's why I have a black one. I figured they didn't want to mess with all the deeming regs, so they decided to quit early and cut their losses.
But both the decks I used did it. Now, the one with the bigger juice holes might have leaked just because the juice holes were too big, but now I've got the smaller juice hole deck in.
OK, wait, it can't be TIPPED? Like I have to set it on the table and lean down to take a "level" hit off it? Both times it's peed on me, it was EXACTLY when I tilted the mod to adjust the wattage. That's a tiny bit more tilted than when I go to take a hit off it, but REALLY?
The deck is in solid, tabs in notches, and yes, that little o-ring is in there. It keeps wanting to fall out, but I keep putting it back in. Maybe THAT o-ring is slightly too small? Maybe? Would that do it? That's the very bottom o-ring, though.
And you guys have to let me catch up! LOL! I keep thinking I'm done with this post, and something else shows up and I have to quote and respond!
(Well, I don't HAVE to, I guess. And there's another one. I'm just gonna hit post anyway.
I guess I might have to do that.
I'm not complaining, I'm impressed
Oh. Most people can't stand when I talk too much, and I've never been accused to saying too little.
I bottom-filled it yesterday, but I top-filled it today, so I've done it both ways and it puked both times. It took LONGER to puke on me today, but still... it puked.
OK, then maybe I should get my bag of spares and replace all the o-rings then? Maybe one of the ones in the tank has a cut out of it or something that's letting juice through? They all APPEAR to be there, but looking for black o-rings on a black tank is kinda hard.
Also, I don't think I have mine broken down into enough pieces. I have gotten as far as having the top cap, the bottom cap, the deck, and the bottom-middle piece that has the airflow control on it. That leaves the glass and the top bit around the top of the glass that the chimney is part of. Rixy's picture has more parts. No, looking again, I guess it's just that I haven't gotten the AFC ring off, but would there be something in there that I need to check. Isn't that just metal sliding on metal? And if I need to get it off, how does it come off?
They still had the black ones, so that's why I have a black one.
I figured they didn't want to mess with all the deeming regs, so they decided to quit early and cut their losses.But both the decks I used did it. Now, the one with the bigger juice holes might have leaked just because the juice holes were too big, but now I've got the smaller juice hole deck in.
OK, wait, it can't be TIPPED? Like I have to set it on the table and lean down to take a "level" hit off it? Both times it's peed on me, it was EXACTLY when I tilted the mod to adjust the wattage. That's a tiny bit more tilted than when I go to take a hit off it, but REALLY?
The deck is in solid, tabs in notches, and yes, that little o-ring is in there. It keeps wanting to fall out, but I keep putting it back in.
Maybe THAT o-ring is slightly too small? Maybe? Would that do it? That's the very bottom o-ring, though.And you guys have to let me catch up! LOL! I keep thinking I'm done with this post, and something else shows up and I have to quote and respond!
(Well, I don't HAVE to, I guess. And there's another one. I'm just gonna hit post anyway.
It's all good. Taking the cheap stuff. lol.
Hugs to you and Ems too!!! Ok, I'm outta here.
I've missed everyone so much.
Love ya Lannie the Mod Womping Queen!And you guys have to let me catch up! LOL! I keep thinking I'm done with this post, and something else shows up and I have to quote and respond!
HAVE FUN!
I said it was a silly idea but I do know it leaks if tilted to much but that's mostly lying flat.... The bottom O ring does fall out easy, it's not that and my new Boreas is 0403, wow, they must of dug mine up from the depths of the warehouse lol.
Maybe it's just a faulty tank x
Maybe it's just a faulty tank x
I hope not. I hate wasting money.
Send it to me.
Give me a day or two.
You will get a working tank back.
I hope not. I hate wasting money.
There are two o-rings that hold the air/juice control on and the one that is on the bottom of the shaft that screws in the bottom and the last one I can think of that would cause leaking is on the build deck that goes into the base. If any of these 4 are bad or missing then that would cause leaking.
Truthfully the new laws should make things stay on the market longer. After August 8 no new products can be introduced in the US, so they will have to keep selling tanks that already exist or stop selling anything at all in the US.
- Status
Similar threads
