The Womper Woom, Womp it again Sam.

[LJFinFLA]

Wow that's a pile o wire...
It was my understanding that Ni200 doesn't form an oxidization layer between the wraps so that is why they have to be spaced. I am wondering if you are getting shorts between the loops causing your lower resistance.

Wow that's a pile o wire...

Yea I had to rest between coils!!
I'm not getting any hot spots or shorting. The thing is actually vaping pretty well. I haven't used Ni200 in a real long time and just decided to give it another whirl. Not something I would build constantly. I might mess around with some combo of SS316L and Ni200. Maybe a fused Clapton if I get the energy or the time. I was also thinking of making some Titanium coils for it as well. We'll see.

 

[TrollDragon]

I found a great build for one of my V-Mini's @DingerCPA!

Dual 22g, very nice!

 

[LJFinFLA]

I found a great build for one of my V-Mini's @DingerCPA!

Dual 22g, very nice!

Nice! I might pick up some 22ga from Lightning vapes this weekend. I don't have any right now.

 

[TrollDragon]

Yea I had to rest between coils!!
I'm not getting any hot spots or shorting. The thing is actually vaping pretty well. I haven't used Ni200 in a real long time and just decided to give it another whirl. Not something I would build constantly. I might mess around with some combo of SS316L and Ni200. Maybe a fused Clapton if I get the energy or the time. I was also thinking of making some Titanium coils for it as well. We'll see.

Enjoy!
Be sure to post pics of any great combo builds for us to try.

 

[TrollDragon]

Nice! I might pick up some 22ga from Lightning vapes this weekend. I don't have any right now.

That's Kanthal, some SS would be good with the 30% off sale!

 

[LJFinFLA]

Enjoy!
Be sure to post pics of any great combo builds for us to try.

If I come across anything worth while I definately let ya know.

That's Kanthal, some SS would be good with the 30% off sale!

Yup probably get both and maybe some ribbon wire to try some things out with.

 

[DingerCPA]

I found a great build for one of my V-Mini's @DingerCPA!

Dual 22g, very nice!

NOICE! What does it ring in at?

 

[TrollDragon]

NOICE! What does it ring in at?

Comes in at 0.22 ohms and I run it at 480F/100W.

 

[Sir Kadly]

I found a great build for one of my V-Mini's @DingerCPA!

Dual 22g, very nice!

22g? What's the ramp up? I tried a 24g coil and hated how long it took to heat up and cool down.

 

[Boden]

Is working

 

[Eskie]

Is working
View attachment 594799

Beautiful!!

 

[Rixsta]

When a tank is this good, better get another one

Finally get to try out these zipper coils

Nice mod btw Boden

 

[LJFinFLA]

When a tank is this good, better get another one

Finally get to try out these zipper coils

Nice mod btw Boden

Saweeeet looking coils!!!

 

[Rixsta]

Saweeeet looking coils!!!

Hi buddy, they perform well, 0.15ohm, 95w..

Look forward to trying the postless deck with 2 x twisted dual Claptons on the Hammer of God, got to get them no lower than 0.4ohm I feel, although the mod is parallel series for battery safety, it's still 8.4v so gonna chuck some ha.

Gotta love these tanks though, I have used nothing else since getting the first one

 

[LJFinFLA]

Hi buddy, they perform well, 0.15ohm, 95w..

Look forward to trying the postless deck with 2 x twisted dual Claptons on the Hammer of God, got to get them no lower than 0.4ohm I feel, although the mod is parallel series for battery safety, it's still 8.4v so gonna chuck some ha.

Gotta love these tanks though, I have used nothing else since getting the first one

What's up Rix. Hope your guys enjoyed your vacay! That setup is going to be a beast for sure!!
Any leaking problems with the Modfather??

 

[Boden]

One more solder joint and is done. Waiting for the epoxy holdng the battery contacts down to cure.

Apparently my tolerances are so tight all the wires are where they are supposed to be.

Still going to solder that last contact though.

 

[Rixsta]

What's up Rix. Hope your guys enjoyed your vacay! That setup is going to be a beast for sure!!
Any leaking problems with the Modfather??

No leaks but as with this design, Supreme, Boreas, juice does collect under the AFC but they have thought about that and unlike the Sup and the Boreas, where you have to dismantle the whole tank, with the Modfather, unscrew the base and lift the AFC off, clean and put back together, that makes a massive difference in every day use.
Just got to pack the bottom of the deck with cotton, the whole lot, juice it up and gently pat the cotton down away from the bottom of the coils..
Another thing worth mentioning, if you put the tank on it's side, because there is no juice control, it will leak, I managed with it on holiday, which was great by the way thanks, well except the burns ha, erm, so yeah, I would say this is at home setup or placed upright in the car, putting this in your pocket and sitting down is a no no..

It's just a really well made, great flavor, big, awesome RTA buddy...

@Boden, skills bro, looking sweet as.......

 

[Debadoo]

Is working
View attachment 594799

Is it black? that's what it looks like in the photo. But looks nice

 

[Rixsta]

@Debadoo, I know it's the wrong thread but just wanted to say Hi, I've missed you x

 

[LJFinFLA]

No leaks but as with this design, Supreme, Boreas, juice does collect under the AFC but they have thought about that and unlike the Sup and the Boreas, where you have to dismantle the whole tank, with the Modfather, unscrew the base and lift the AFC off, clean and put back together, that makes a massive difference in every day use.
Just got to pack the bottom of the deck with cotton, the whole lot, juice it up and gently pat the cotton down away from the bottom of the coils..
Another thing worth mentioning, if you put the tankl on it's side, because there is no juice control, it will leak, I managed with it on holiday, which was great by the way thanks, well except the burns ha, erm, so yeah, I would say this is at home setup or placed upright in the car, putting this in your pocket and sitting down is a no no..

It's just a really well made, great flavor, big, awesome RTA buddy...

@Boden, skills bro, looking sweet as.......

Thanks Buddy. I'm still trying to figure a way to stop the Boreas from seeping. I've gone through numerous o-rings but can't seem to get one that will stop it. It really is a shame because I like it so much. I just can't Take the damn mess. I've been bottom filling it like you suggested but it still seeps. I'm sure the Modfather is a great tank as well but I wouldn't be able to deal with another seeping tank especially one so big! One of these days maybe but not now.