That's a good suggestion, highping, and it may very well work. Here's an easier method, which I have posted on another thread to help someone out, but it definitely belongs here.
As soon as you get the burnt atty taste, hold the button down and blow into the hole on the side of the atty. If you don't want to take the cover off you can blow into the hole where the bottle is, it works the same. Do this for a while to burn off all the excess juice. Now, and here's the tricky part.
If you have the bottle filled more than halfway with juice, then BARELY pump the bottle. As soon as you feel the plastic indent, let go. You are now ready to vape, and it will not be flooded. I promise. Repeat this step until...
If The bottle is less than half full of juice, When you get to this point, you have to push it in a little more. If you look inside the bottle, you can see the plastic tube inside. Push on the bottle until you see the juice go upwards. You will not have to push the bottle no more than halfway. Once you see juice go up, let go. You are now ready to vape, and it will not be flooded. I promise. Repeat this step until...
If You are almost out of juice, At this point, it's pretty much the same as last time, except you have to push even harder. Watch the tube carefully, and as soon as you get juice to go up the tube, let go. You are now ready to vape, and it will not be flooded. I promise. Repeat this step until...
If You are out of juice, now make sure you rinse out your bottle before refilling to get all of the atty crud out from the bottom. This is key to making the most out of the life of your atomizer.
I have been doing this for a while now, and have had absolutely zero flooding issues and always a great vape. This mixed with holding the button down in between drags until you get your fix makes this the best vapor, flavor, and TH producing PV I've ever used.
Question. When fluid starts up the tube and you let go is the fluid suppose to continue up to the atty or drop back down in the bottle? When I do this it either stays where it is when I release the bottle or it drops back into the bottle.