Tootle Puffers, Part Three! (The Sequel of the Redux)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
Today was out of the frying pan and into the fire. Between shuttling trailers I was sent text and had to figure out a way to get home ASAP. TWO of the neighbor ladies found the neighbor who's wife just died passed out on the garage floor! It was ugly, I learned a LOT and he REALLY wants to "go home" and see Linda (his wife) The guy I was helping move still thinks I'm ...... at him, he's got so much going on I didn't feel the need to vent about this, just left ASAP.
I guess he's been eating the wife's pain killers and wants to see her and "go home". It's a mess!
Dropped the Pico/Theorum again today, hard! The top cap came off of the Theorum , not the drip tip, the whole top! Cleaned it off, it bounced off concrete and landed in sand, and went on about my business!
No wire today yet, so I can't play with the TC yet, and the wattage still keeps changing? The resistance has been steady at 1.44 ohms, but I'm going from 13-12.2 watts for some reason?
I'm beyond tired.
I guess he's been eating the wife's pain killers and wants to see her and "go home". It's a mess!
Dropped the Pico/Theorum again today, hard! The top cap came off of the Theorum , not the drip tip, the whole top! Cleaned it off, it bounced off concrete and landed in sand, and went on about my business!
No wire today yet, so I can't play with the TC yet, and the wattage still keeps changing? The resistance has been steady at 1.44 ohms, but I'm going from 13-12.2 watts for some reason?
I'm beyond tired.
My hand check today. I switched the internals of a dinged up BB in to a blue case. Pretty 
So now I have a blue one in the collection.
So now I have a blue one in the collection.
They just hauled the neighbor off in an ambulance. He'd eaten a bunch of pills and chased it with a pint of tequila.
I'm really considering loading up the notch coil and feeding it tonight!
I'm really considering loading up the notch coil and feeding it tonight!
You're something to watch, XX. So casually described too. [emoji106]My hand check today. I switched the internals of a dinged up BB in to a blue case. Pretty [emoji14] So now I have a blue one in the collection.
Hope you get some relief from all the things going on around you. I know it is real, but it sounds like a TV show. Take care of yourself.
First time TP poster. I can't believe I finally caught up! I stumbled upon this incredible thread a couple of months ago, and I've been hooked since. Bravo to the creator(s) and everyone who contributed along the way. I didn't realize there was a name for my low power / MTL affliction.
So much high powered knowledge, about low power vaping. Started vaping almost 10 months ago. After a brief affair with a leaky, Lava starter kit. I realized vaping wasn't just a novelty, and was my ticket off the cigarette train, after 45 years of 1 to 2 packs a day. I quickly graduated to a Nautilus Mini & MVP 20. With that set up I was totally off the cigs within 3 days. I'm a tobacco lover, and unable to find a decent tobacco juice at any of my local vape shops, I jumped into DIY and have had wonderful results.
I loved the Mini (still do), but disliked having to buy coils, so I started building & wicking on a Subtank Mini. I received an evic mini kit for Christmas, and didn't give the Tron-S tank that came with it, much thought, for a month or so. I gave it a try, with the CLR coils and discovered I liked it, and have been using that since.
All the info in this thread, about the Kayfuns convinced me to try it. I picked up four Ehpro Kayfun Lite+ V2 tanks. They were just a tad tighter than I like, so I fired up the drill press and drilled out the air tubes to 5/64. Ooh la la... bingo! That put them right in my wheelhouse for draw and flavor. I might get 4 more and just stash them.
The Noob does not come to the thread empty handed. Hopefully this might help another Kayfun user. I read about a few folks having issues with the side airflow holes on the air tube, not aligning with the air holes on the base. While reassembling my 4 tanks after drilling & cleaning, I ran into that issue with one of the four. I tried flipping the positive block / post over and threading the tube in from the other side. Worked perfectly. I didn't see that mentioned (or missed it) so I thought I'd share.
Please pardon the long winded first post, and Happy Mother's Day to all the TP Moms.
So much high powered knowledge, about low power vaping. Started vaping almost 10 months ago. After a brief affair with a leaky, Lava starter kit. I realized vaping wasn't just a novelty, and was my ticket off the cigarette train, after 45 years of 1 to 2 packs a day. I quickly graduated to a Nautilus Mini & MVP 20. With that set up I was totally off the cigs within 3 days. I'm a tobacco lover, and unable to find a decent tobacco juice at any of my local vape shops, I jumped into DIY and have had wonderful results.
I loved the Mini (still do), but disliked having to buy coils, so I started building & wicking on a Subtank Mini. I received an evic mini kit for Christmas, and didn't give the Tron-S tank that came with it, much thought, for a month or so. I gave it a try, with the CLR coils and discovered I liked it, and have been using that since.
All the info in this thread, about the Kayfuns convinced me to try it. I picked up four Ehpro Kayfun Lite+ V2 tanks. They were just a tad tighter than I like, so I fired up the drill press and drilled out the air tubes to 5/64. Ooh la la... bingo! That put them right in my wheelhouse for draw and flavor. I might get 4 more and just stash them.
The Noob does not come to the thread empty handed. Hopefully this might help another Kayfun user. I read about a few folks having issues with the side airflow holes on the air tube, not aligning with the air holes on the base. While reassembling my 4 tanks after drilling & cleaning, I ran into that issue with one of the four. I tried flipping the positive block / post over and threading the tube in from the other side. Worked perfectly. I didn't see that mentioned (or missed it) so I thought I'd share.
Please pardon the long winded first post, and Happy Mother's Day to all the TP Moms.
What a great into to our little part of the vaping world.
That kayfun tip is brilliant and will help anyone annoyed by the issue.
What a great into to our little part of the vaping world.
That kayfun tip is brilliant and will help anyone annoyed by the issue.
Thanks for the welcome.
It may not work for everyone, but it's easy enough to try.
My hand check today. I switched the internals of a dinged up BB in to a blue case. Pretty
Such classy gear ... simply Beautiful.
Great tip, Doug, and welcome to the thread!
Yep, flipping the block might let the threads "catch" at a slightly different point and let the holes line up easier.
Similar threads
- Locked
