Tootle Puffers, Part Three! (The Sequel of the Redux)

[Bob Chill]

Great advice. Appreciate it. I'm going to order some v3 mini clones from FT. I might like it as well. I use older kayfuns myself (haven't had a need to upgrade. My need for "next best thing" days are long long) and some aerotanks.

I had a subtank and gave it away. I'm MTL and the subtank wasn't my thing. I never needed big clouds and warm vapes. My kayfuns are perfect but too big for my wife. She thinks they are too airy as well. She vapes with her genitanks with the airflow @ 1-2 holes open. I set them wide open. The attractive thing with the kayfun is the airflow control. She'll probably run it with a tight draw. It may not be tight enough but she'll have to get used to it. Unless the regs get drastically altered, as it stands now the only way to go is a stock of rta's.

I build my Kayfuns @ 1 - 1.5 ohms and rayon wick. Cotton is fine too. They are both easy as heck to build.

 

[Maytwin]

I used protank minis before I went to single coil rebuildables,I've tried a few and glad I found the kayfun.I have three 3.1 ES's and pretty much use them exclusively.Once you get the hang of making coils and wicking they're "easy peasey lemon squeezy"

I vape basically clear juices,I roll 2 ohm coils with 30 gauge kanthal,8 wraps 2.24mm inner I.D. @6 watts.The coils last a long long time and I rewick about once every 1 to 2 weeks

Glad I found Kayfun!

I hope the Kayfun v3 mini will be "easy peasey lemon squeezy" for me 'cos I've got one coming on the slow boat from China (along with a few other bits and pieces and an eleaf Pico )

I've also got something else on its way to me that my husband has ordered for my birthday later this month but he won't give me any clues as to what it is, but as a non-vaper he did assure me he'd done some research

 

[Krisma]

I hope the Kayfun v3 mini will be "easy peasey lemon squeezy" for me 'cos I've got one coming on the slow boat from China (along with a few other bits and pieces and an eleaf Pico )

I've also got something else on its way to me that my husband has ordered for my birthday later this month but he won't give me any clues as to what it is, but as a non-vaper he did assure me he'd done some research

Oooooooo pressies. I am sure whatever he gets you will be wonderful. And if it's purple.....even better

Remind us to celebrate with you on the day.

 

[Kenna]

I did this today. #4!

Thank you for your order

Your order has been received and is now being processed. Your order details are shown below for your reference:

Order #24973ProductQuantityPriceLimited Edition Hexohm v2.1
Color: Rainbow's End

 

[sorrynomore]

I hope the Kayfun v3 mini will be "easy peasey lemon squeezy" for me 'cos I've got one coming on the slow boat from China (along with a few other bits and pieces and an eleaf Pico )

I've also got something else on its way to me that my husband has ordered for my birthday later this month but he won't give me any clues as to what it is, but as a non-vaper he did assure me he'd done some research

You should get along fine with the KF v3 (I have no experience with it though) it'll work out for you,I'm sure.

Birthdays are fun...I'm sure your husband got you something you'll really,really like.

 

[sorrynomore]

Some Canadian places still have replacement glass available.
Replacement Tank For Kraken Atomizer

http://www.canadaejuice.com/replacement-glass-turbine-kraken-doc-dave

With the price of shipping here in Canada it would be better to just another Kraken from FT, FC or 3F unless you have a bigger order with the Canadian company.

Thanks TrollDragon,The Kraken's been tossed into the spare parts bin.I'm quite content with my Kayfun 3.1 clones they work perfect for me.......for now.

 

[ckquatt]

This wasn't anything to do with what's coming down the pike. Poor Issac's had a tough go of it. Damn near bankrupt twice from getting ripped off by vendors, etc., then with everyone going RDA/RTA he just couldn't afford to make all the changes in inventory to keep up.
It really sucks! I love the guy! Had a few late night, one too many, phone conversations with him! Need to give him a call for a pick me up sometime honestly! He's one of a kind and sure did a lot to help the vaping community!

Ikenvape was my go-to for cartos! Great prices and great cartos! It hit me hard when I got the email a while back. Luckily I still have about 150 in my vapeocolypse stash.

But all this FDA stuff got me thinking... If the grandfather date of the deeming doesn't get changed from 2007, all we'll be vaping on is cartos, as that's all I think we're available back then, albeit "pre filled". Seems he could be making money hand over fist if that's all that will be available.

But that's just me thinking silly!

 

[DingerCPA]

Y'all have been chatty. Please consider all "liked" (well, y'all are LOVED in my book )

In "honor" of Master @TrollDragon, I had to revive the "Rayon TD Mullet" (and to give you ALL a hearty laugh this evening) I present:

Spoiler: Mary's Mullet

This is circa 1994 when I was working for an engineering firm which developed test equipment for electric motor manufacturers. Sooooo NOT pretty (but at least my hair was not grey!)

 

[sawlight]

Ikenvape was my go-to for cartos! Great prices and great cartos! It hit me hard when I got the email a while back. Luckily I still have about 150 in my vapeocolypse stash.

But all this FDA stuff got me thinking... If the grandfather date of the deeming doesn't get changed from 2007, all we'll be vaping on is cartos, as that's all I think we're available back then, albeit "pre filled". Seems he could be making money hand over fist if that's all that will be available.

But that's just me thinking silly!

I'm not getting in a tither about this FDA stuff, been hearing about it for too long to get excited about it. I've got enough mechs, and the means to make more, the juice and nic are the kickers. I'm doing fairly well on the NET's and that's just something I'm not comfortable trying DIY.

 

[Vapez]

My life right now. Trigger warning!

Spoiler

I'm suffering severe. My hallucinations has gotten worse. My depression is worse than ever. I've gotten into serious self harm. And during the night before today I took an drug and pill overdose so severe I nearly died. My life barely got saved. My brother was who saw me and called the ambulance. I'm now on observation and they suspect my liver is severly damaged after months of drug, alcohol and pill abuse and overdoses.

I don't know how to cope anymore. I've picked up smoking again. I

Thus why I haven't been posting here. Just thought you guys deserved an update.

Sent from my SM-G900F using Tapatalk

 

[sawlight]

My life right now. Trigger warning!

Spoiler

I'm suffering severe. My hallucinations has gotten worse. My depression is worse than ever. I've gotten into serious self harm. And during the night before today I took an drug and pill overdose so severe I nearly died. My life barely got saved. My brother was who saw me and called the ambulance. I'm now on observation and they suspect my liver is severly damaged after months of drug, alcohol and pill abuse and overdoses.

I don't know how to cope anymore. I've picked up smoking again. I

Thus why I haven't been posting here. Just thought you guys deserved an update.

Sent from my SM-G900F using Tapatalk

I understand and feel your pain more than you may ever know! I'm very sorry to hear of your struggles! I'll be more than happy to give you my cell number if you want it. Sometimes misery loves company?
Take care of you and do what you need to do for now.

 

[3mg Meniere]

All my prayers for you, Vapez. I suspected you weren't doing well.

 

[DingerCPA]

Ohhhhhhhhhhhhhhhhhh, I have just discovered my own little corner of Nirvana.....

Got my first Nemmy (clone) on Friday. I wanted to throw it into rotation this evening. Grabbed a Subtank Mini (shorty V2) and a PT2 coil. Flipped the grommet so I block the chimney and minimize (eliminate) leaking.

Happy, happy, happy, happy, happy

 

[3mg Meniere]

Ohhhhhhhhhhhhhhhhhh, I have just discovered my own little corner of Nirvana.....

Got my first Nemmy (clone) on Friday. I wanted to throw it into rotation this evening.

Another convert to the Nemenati! The ultimate in Vapapocalypse-proof equipment. Kickit!

 

[sawlight]

Love me some Nemi! Just wish the lock ring wasn't so slick!

 

[DingerCPA]

Another convert to the Nemenati! The ultimate in Vapapocalypse-proof equipment. Kickit!

Got 3 more kicks en route along with two more Nemmies. The first one was the "inexpensive" <$9 model, just to give it a try. Grabbed a couple more over the weekend, and they already are marked as shipped! Love how compact they are - even in 18650 mode. Simple elegance IMHO.

I'm going to order sets of copper contacts to replace the plated ones. Also ordered magnets to update all the switches.....

Very nice with a simple 1.6Ω PT2 head..... Very nice

 

[3mg Meniere]

Love me some Nemi! Just wish the lock ring wasn't so slick!

If I were to get some spare change, I would try J-Wraps for a more satisfying feel in the hand-- like traction.

 

[DingerCPA]

Love me some Nemi! Just wish the lock ring wasn't so slick!

Vape band?

 

[juskiddin]

Y'all have been chatty. Please consider all "liked" (well, y'all are LOVED in my book )

In "honor" of Master @TrollDragon, I had to revive the "Rayon TD Mullet" (and to give you ALL a hearty laugh this evening) I present:

Spoiler: Mary's Mullet

This is circa 1994 when I was working for an engineering firm which developed test equipment for electric motor manufacturers. Sooooo NOT pretty (but at least my hair was not grey!)

*cough* *sputter* *snort*
That is a keeper!

 

[DingerCPA]

*cough* *sputter* *snort*
That is a keeper!

I know, RIGHT????? I thought a giggle for you would make you feel better (didn't quite expect the guffaw! )