Tootle Puffers, Part Three! (The Sequel of the Redux)

[Sugar_and_Spice]

Sugar; i have assembled 50+ of these and sold them in eBay. The link i provided is the correct base.

Now you are correct that one Monster V3 that WILL NOT work with kayfun pieces because it needs a wider barrel.

Here is the base you are thinking of.

$3.73 Free Shipping Replacement Base for Kayfun Monster V3 RTA Atomizer (Base (Kayfun Monster V3), Silver) at m.FastTech.com

For a while 528 Customs made their own bases that was a 1:1 clone of the standard kayfun. Then with Version 3 they went their own way or svoemesto sued them and they made the barrel about 1-1.5 mm wider than tge standard Kayfun barrel

No. I am only going by your link that you posted and said below the link that it was to a monster mini base, when in fact it is the link to a monster base. Pls read the description that is posted on ft where it says the chimney thread size is M13x.05.

 

[Sugar_and_Spice]

View attachment 631689 Kayfun Monster Mini V3 base i listed. It fits perfectly.

Could you post a link please.

 

[beckdg]

They got back to me within 24 hours and are sending a replacement!

But Eee... ewwwe...

Tapatyped

 

[Two_Bears]

No. I am only going by your link that you posted and said below the link that it was to a monster mini base, when in fact it is the link to a monster base. Pls read the description that is posted on ft where it says the chimney thread size is M13x.05.

I too got the WRONG base but they had 528 Customs on tge bottom

Then use this link.

$4.12 Free Shipping Replacement Base for Kayfun Monster Mini V3 RTA Atomizers (Base (Kayfun Monster Mini V3), Gold) at m.FastTech.com

 

[Two_Bears]

Here is tge complete list again with the updated Kayfun Monster Mini V3 base.

Short Kayfun parts

$0.91 Free Shipping Replacement Screws for Kayfun V4 (5-Pack) (Screws, 5-Pack) at m.FastTech.com
Spare screws for trapping leads.

$0.80 Free Shipping Rubber O-Ring Seals for E-Cigarette (20-Pack) (17*1mm: 20-Pack, Black) at m.FastTech.com
Spare O rings for Kayfun and Orchid bases

$1.69 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (Kayfun Mini Bell Cap, Acrylic, Translucent) at m.FastTech.com
Short bell cap

https://m.fasttech.com/products/3023/10009156/2056700-spare-parts-kit-for-kayfun-lite-plus-v2
Spare parts for Kayfun lite plus V2
The base i use

https://m.fasttech.com/products/302...lacement-five-pawns-styled-chimney-for-kayfun
Barrel and Nano chimney for Kayfun. You will only use the barrel

https://m.fasttech.com/products/3023/10009156/2019500-replacement-base-for-22mm-kayfun-lite-plus-v2
The Kayfun base i use for MTL.

https://m.fasttech.com/products/302...placement-base-for-kayfun-monster-mini-v3-rta
Kayfun Monster Mini V3 base if you want a direct lung vape. I have both kinds of bases.

https://m.fasttech.com/products/302...lacement-acrylic-bell-cap-for-kayfun-mini-rta
LOT of 5 flat top bell caps

 

[beckdg]

what sold me was I can vape their straight un flavored NIC , AND LIKE IT
so adding ANY flavor works out great...

good prices too...

Not very convincing @ 18mg/ml.

Tell me how you like it @ 100mg/ml & 80ish watts.

That's my taste test.

And even 120ml of 50mg/ml still comes out to just over $6 flavored, albeit not overly so, even with the nic I use.

So price is inconsequential unless you're looking for free.

My freezer only contains NN Nude Armour and VT clean nic.

Tapatyped

 

[iBloke]

All this talk of nicotine has just reminded me to go and buy some coz I'm gettin' low.

200 ml of 100mg/litre on its way.

Ta for the remoinda

 

[Bea-FL]

@Dash Riprock I noticed you hanging around this thread for a while and I think it's time for a proper welcome, so

This is a very friendly and knowlegable bunch so feel free to join in if you want.

 

[Plettschner]

Here is tge complete list again with the updated Kayfun Monster Mini V3 base.

Short Kayfun parts

$0.91 Free Shipping Replacement Screws for Kayfun V4 (5-Pack) (Screws, 5-Pack) at m.FastTech.com
Spare screws for trapping leads.

$0.80 Free Shipping Rubber O-Ring Seals for E-Cigarette (20-Pack) (17*1mm: 20-Pack, Black) at m.FastTech.com
Spare O rings for Kayfun and Orchid bases

$1.69 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (Kayfun Mini Bell Cap, Acrylic, Translucent) at m.FastTech.com
Short bell cap

$1.92 Free Shipping Spare Parts Kit for Kayfun Lite Plus V2 (Spare Parts Kit (Kayfun Lite Plus V2)) at m.FastTech.com
Spare parts for Kayfun lite plus V2
The base i use

$2.26 Free Shipping Replacement Five Pawns Styled Chimney for Kayfun RTA (Chimney & Base, Five Pawns Logo, Silver) at m.FastTech.com
Barrel and Nano chimney for Kayfun. You will only use the barrel

$4.00 Free Shipping Replacement Base for 22mm Kayfun Lite Plus V2 & Kayfun Lite Five Pawns (Base (Kayfun Lite Plus V2), Silver) at m.FastTech.com
The Kayfun base i use for MTL.

$4.12 Free Shipping Replacement Base for Kayfun Monster Mini V3 RTA Atomizers (Base (Kayfun Monster Mini V3), Gold) at m.FastTech.com
Kayfun Monster Mini V3 base if you want a direct lung vape. I have both kinds of bases.

$5.85 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (5-Pack) (Kayfun Mini Bell Cap, Acrylic, Translucent, 5-Pack) at m.FastTech.com
LOT of 5 flat top bell caps

Something just struck me... if the barrel and the tank are both threaded and assembled together, is there any binding when screwing the base on?

I see they are both the same thread pitch, but they are still two separate sets of threads.


Sent from Uranus using Tapatalk

 

[Bea-FL]

@Two_Bears last summer I bought a monster mini and per your advice I bought a Kayfun lite plus. I found that the Monster base was too airy for MTL and you suggested I switch the Monster base with the KL+ base. That worked. So now I use the Monster tank and barrel with the KL+ base (1st photo). There is no chimney/cone in this. Not counting the 510 pin and driptip it measures 30.16mm (rounded to 30mm). To me it looks like to what you've been suggesting in the last few pages and I assume this is the smallest it can be.

So if this is it, all I need is replacement bells (how likely are they to break BTW?) and spare screws and o-rings?Please verify I got it right. Thanks.

You're a doll for being so patient with us and explaining all this over and over

 

[pufZeppelin]

Not very convincing @ 18mg/ml.
Tell me how you like it @ 100mg/ml & 80ish watts.
That's my taste test.
And even 120ml of 50mg/ml still comes out to just over $6 flavored, albeit not overly so, even with the nic I use.
So price is inconsequential unless you're looking for free.
My freezer only contains NN Nude Armour and VT clean nic.

plenty convincing @ 18mg/100%VG/$.06 ml
compared to an average $19 @ 30ml = $.60+ ml

what ? ~~ " @ 100mg/ml & 80ish watts. ; That's my taste test. "

price is inconsequential ? ; that is all part of the equation...
price/taste -- taste/price is what most of us thrive on

like I said, to start with a GOOD base (un flavored NIC) and it vapes good,
adding flavor is just a good way to go for personal preference & to mix it up a bit....

 

[beckdg]

plenty convincing @ 18mg/100%VG/$.06 ml
compared to an average $19 @ 30ml = $.60+ ml

what ? ~~ " @ 100mg/ml & 80ish watts. ; That's my taste test. "

price is inconsequential ? ; that is all part of the equation...
price/taste -- taste/price is what most of us thrive on

like I said, to start with a GOOD base (un flavored NIC) and it vapes good,
adding flavor is just a good way to go for personal preference & to mix it up a bit....

My 50mg/ml costs ~$.05/ml and tastes clean.

At 25mg/ml with pg/vg and flavoring, my wife's juice still comes in around $.03/ml.

With some of the cleanest premium nic on the market.

Inconsequential defined.

And I chain vape it.

ETA: You're paying more than twice what I am for nic.

By your own argument, that seems a bit silly.

Tapatyped

 

[Sludge Van Diesel]

Does an e-pipe (2.4Ω atty powered by 18350 battery) user on 18 / 24mg qualify as a tootler?

 

[DavidOck]

Sure, and welcome

 

[corn flakes]

Does an e-pipe (2.4Ω atty powered by 18350 battery) user on 18 / 24mg qualify as a tootler?

I think you are qualified.

Welcome

 

[NU_FTW]

uh oh, did not realize credentials were being checked to be here, yea....i don't believe I meet the criteria to be a tootle's puffer

 

[DPLongo22]

uh oh, did not realize credentials were being checked to be here, yea....i don't believe I meet the criteria to be a tootle's puffer

The bouncers got bounced ages ago. Anyone can walk in now. I wouldn't be too concerned.

Just no smoking, K? Ex-smokers are the WORST when it comes to the smell.

 

[Bea-FL]

Does an e-pipe (2.4Ω atty powered by 18350 battery) user on 18 / 24mg qualify as a tootler?

How do you like your e-pipe? And welcome!

 

[NU_FTW]

The bouncers got bounced ages ago. Anyone can walk in now. I wouldn't be too concerned.

Just no smoking, K? Ex-smokers are the WORST when it comes to the smell.

ha its been 5+ yrs vaping and 3+ off the stinky 2 + since I used kayfin anything

 

[Sugar_and_Spice]

uh oh, did not realize credentials were being checked to be here, yea....i don't believe I meet the criteria to be a tootle's puffer

Not sure if I do either? I just want my vape to taste good so I use a variety of different set-ups. From a nautilus 1.6 ohm on a pico - to a boreas on a g-priv. Some of my ejuice(I DIY) just taste better at a lower ohm and some do at a higher one. Not sure I really fit in a nitch anywhere. Just trying to keep off the stinkies.