Is the juice in each bottle the same thickness?
Pretty much, yes.
Is the juice in each bottle the same thickness?
My mind is now blank.Pretty much, yes.
My mind is now blank.
I have another problem. The 510 appears to be a bit deeper than it should be. Two of my Nuppins don’t make contact at all. Is there a way to lift it up?
Sent from my iPhone using Tapatalk
I have another problem. The 510 appears to be a bit deeper than it should be. Two of my Nuppins don’t make contact at all. Is there a way to lift it up?
Sent from my iPhone using Tapatalk
Can't speak to longevity, as I've had mine about a month, but ever since tightening down the door screws, it's been great. No loosening back up. My TC gets a little sluggish at times, but blasting the coil in watt mode seems to clear that up.So,how is everyone getting on with there topside? Mine is still going strong. The only problem I have is having to nip up the screws that hold the hinge in place each time I have to change and charge battery.
Mine works really well in TC mode I might have got lucky.Can't speak to longevity, as I've had mine about a month, but ever since tightening down the door screws, it's been great. No loosening back up. My TC gets a little sluggish at times, but blasting the coil in watt mode seems to clear that up.
Mine works really well in TC mode I might have got lucky.
316L SS 26 gauge. While we can't dial in TCR on this device I just bump the wattage boost to a satisfying vape and leave it.Mines working well most of the time, just gets throttled a little to easily at times. What wire/mode are you using?
316L SS 26 gauge. While we can't dial in TCR on this device I just bump the wattage boost to a satisfying vape and leave it.
Mine has not throttled at all yet. It is still a little less in TC then my DNA devices and my smok alien 220 which hit TC pretty exact .
I do agree Arctic Fox on this device would be very nice. I was kind of hoping Dovpo would release some TC FW updates but I guess that's too much of a stretch ??The round wire could be the difference. I find a TCR of 92 is almost identical to the tc-ss setting. It's not so much an over throttling as it is a misread of resistance. If I flip to watt mode when I get the problem, my 0.45 ohm coil reads at 0.6-0.7 or so. Other than that, it's as good as I'd expect linear TC to function, which is to say, infinity better than the stock firmware on my RX2, but no where near the Arctic fox firmware. I'd love to see that ported.
Thanks for the tip, I'll give it a go. As for updates, I'd imagine we might get one more, maybe a stealth mode or something else minor. I see them keeping to the KISS principle with the OG topside, and the YiHi getting all the frills. Which I both like and dislike. Simple is great, but an Android like easy and pro mode would be stellar. With things like AF, it's obvious these chips are capable of so much more than what manufacturers let on, and the latest wd-420-bamf chipset isn't needed for high class vaping.I do agree Arctic Fox on this device would be very nice. I was kind of hoping Dovpo would release some TC FW updates but I guess that's too much of a stretch ??
EDIT: I generally keep my TCR at .0096 for SS that is what I always suggest to those having problems in TCR with TC.
Yeah I am looking at the new carbon too but only if they fix the battery door. Having to tighten those screws on my topside all the time I might just stay with that.Thanks for the tip, I'll give it a go. As for updates, I'd imagine we might get one more, maybe a stealth mode or something else minor. I see them keeping to the KISS principle with the OG topside, and the YiHi getting all the frills. Which I both like and dislike. Simple is great, but an Android like easy and pro mode would be stellar. With things like AF, it's obvious these chips are capable of so much more than what manufacturers let on, and the latest wd-420-bamf chipset isn't needed for high class vaping.
Yeah I am looking at the new carbon too but only if they fix the battery door. Having to tighten those screws on my topside all the time I might just stay with that.
I would love to see a slide out door plate for that. At least we would not have to worry about losing one of those small screws if we forget about it a couple times ??
Your doors are plastic?I could see not using a rivet for replacibility of a broken door, but then why make the door out of plastic in the first place.