VaporShark rDNA

[Fir3b1rd]

thanks. I did see those heads. they were for the nautilus. I like the kangertech sub tank because it's a hybrid and I like their bottom coils because they use cotton.

I assume the tobh is the original and the stillare is the clone. I watched a video and the guy that put the coils on made it look so easy. lol Plus I loved the look and he commented it gave a cooler vape (which I like) compared to other rda's. But easy or easier sounds better. I'll will have to check it out on youtube. thanks.

What's the clt?

The only part of the tobh that is tricky
- and it could be just me- where the block is on the deck for the afc is, it leaves very little space for me to cram the coil in with the leg through the posthole, other than that it is easy.
The clt is from infinite, similar posthole design with more airflow, puts out a ton of vapor and the postholes are bigger making it super easy to do a dual coil build. It comes with 2 drip tips that are wider than the 510.
If you like a cooler vape though and aren't looking for a.cloud chasing rig, i would go back to the magma, a decent tobeco clone can be found on the bay of e for under 15 bucks. It really is a great atty to learn on imho.

 

[Brandon David]

I thought it would be tricky when I first saw the deck today but as long as you're paying close attention there won't be any issues. I did my first build on mine a couple of hours after work today and had no issue and that's with a 28g 11/12 wrap micro coil so a decently long coil. My only issue is the screwdriver is a size or so too small for the screws so be careful not to strip them out or grab a screwdriver with a hair larger tip.

 

[Fir3b1rd]

I thought it would be tricky when I first saw the deck today but as long as you're paying close attention there won't be any issues. I did my first build on mine a couple of hours after work today and had no issue and that's with a 28g 11/12 wrap micro coil so a decently long coil. My only issue is the screwdriver is a size or so too small for the screws so be careful not to strip them out or grab a screwdriver with a hair larger tip.

I use the flathead side of the screw driver for those-just sayin

 

[Brandon David]

Mine only came with a phillips. Ah well. Haha

 

[freedogg]

I got really tired of those long .... coils and started using twisted 30ga coils for the last couple weeks and like it much better.

 

[TheKiwi]

I got really tired of those long .... coils and started using twisted 30ga coils for the last couple weeks and like it much better.

How does a twisted 30ga compare to the 28ga in terms of resistance?


Burping out loud using Tapatalk

 

[Brandon David]

I got really tired of those long .... coils and started using twisted 30ga coils for the last couple weeks and like it much better.

Did you use the drill method (not that I can imagine doing it any other way). I've got a good bit of 30 and am probably going to try it out this weekend.

 

[Fir3b1rd]

Mine only came with a phillips. Ah well. Haha

Comes with ifinite clones or 2.99 at walgreens by the reading glasses
I

 

[Brandon David]

Comes with ifinite clones or 2.99 at walgreens by the reading glasses
I

I've got one of those for my glasses and it didn't cross my mind. Good call.

 

[metlgawd]

Someone asked about VS's juice. I got a bottle of Strawberry Cheesecake (12mg) with my rDNA 40. It's pretty good.

Stay away from mountain dude...tastes nothing like it, actually tasted like cat pee smells

 

[metlgawd]

YESSS. YESSSSSSS. My plan has worked flawlessly. MWAHAHAHHAAH. Fyi I bought a lemo from fasttech

I ordered one form there as well. Still contemplating the 1:1/oem/authentic aqua 2

 

[ScandaLeX]

If I keep checking my e-mail 5 times an hour, will my rDNA 40 ship any faster?

LOL!!! I tend to do this with all the stuff I buy.

Thats called watching a pot boil. Always ends in frustration. Forget about it and be surprised and happy when it arrives.

Sorry, you asked

I wanna be surprised and happy when it ships. LOL!

 

[ScandaLeX]

Finally gonna break down a buy a Lemo. I have to cause Kiwi did!!

Who's better....Smoke Evolution (39.99) or Ecigcity (36.99).

I think they're both great places to buy from. I got mine from SE with a 10% code (GOTSMOK10).



If you're buying cause Kiwi did you'll end up in the poor house- he never stops spending.

 

[TheKiwi]

I think they're both great places to buy from. I got mine from SE with a 10% code (GOTSMOK10).



If you're buying cause Kiwi did you'll end up in the poor house- he never stops spending.

THATS JUST CATEGORICALLY UNTR----

nvm you're right


Burping out loud using Tapatalk

 

[ScandaLeX]

Ive seen a lot of magma bashing, but i have gravitated back to it every time i try something else. Mostly the convenience. Easy to build, holds a ton of juice for an rda and its a flavor machine.
Its my driving rda, i top it off and and dont have to worry about it for 45 minutes. Definitely not a cloud chucker though. Im finding the hobo and omerta to both have a nice balance though. Nowhere near the juice capacity.

I guess you'll think I'm bashing but my feelings about the Magma are the complete opposite.

 

[ScandaLeX]

THATS JUST CATEGORICALLY UNTR----

nvm you're right


Burping out loud using Tapatalk

Hahahaahahaaaa!!!!!

 

[TheKiwi]

I ordered one form there as well. Still contemplating the 1:1/oem/authentic aqua 2

I ordered one the day it came on. I loveeeee dual coil atties, but have never liked the implementation on the orchid, fogger v4 etc. The Aqua is pretty much The only dual coil atty with deliberately deep juice wells for stuffing cotton in them like in the Aqua v1. That's pretty much the only dual coil atty that I've been able to pump 40 watts through and have the wicking keep up.


Burping out loud using Tapatalk

 

[freedogg]

30ga = less wraps and heats up quicker. twisted 30 is easy to work with.

BTW Kiwi, have you tried Beyond Vapes Silo/Silo Lite tanks with BVC heads?? Quite awesome tanks/heads for when you're feeling lazy!! VS has the TPC heads in stock so of course I had to order some just to see how they work on the 40.

How does a twisted 30ga compare to the 28ga in terms of resistance?


Burping out loud using Tapatalk

 

[Fir3b1rd]

.........,oops

 

[freedogg]

Yeah, Brandon I used the drill method.

I use a little eye screw in the drill chuck, thread the wire through the eye, use a small vise grips on the other end and let her rip. Every time I do it, it breaks right at the eye when it gets twisted enough. Don't think I'll be trying any "Mundy's Magic" any time soon but twisting the 30ga is easy!!

Did you use the drill method (not that I can imagine doing it any other way). I've got a good bit of 30 and am probably going to try it out this weekend.