On another note, has anyone ever replaced the lipo in a DNA30? Any chance to solder on some connector type contacts onto the wires so that you would not have to solder again next time?
VaporShark rDNA
- Thread starter ClintS
- Start date
- th_trl_thread_readers 0
- Status
So I had a slight issue with my .10 build today. I had been at work all day and didn't have time to leave for lunch. So I wasn't able to vape for like 6 hours. Anyways when I got into the car, my kayfun was reading .09. I vaped on this for thirty minutes and it was kickin in TP much sooner. At 15 watts with the .10 build I would never hit TP. At .09 I was hitting it. Anyways it is back to reading .10. Not sure why it is doing this. I think I might try building another coil with an extra wrap to give me some cushion since I'm pushing the limits at .10.
I'm about to give up on nickel for a few. I get a nice build, works great at home and then once I get out, it takes a crap on me. It's on a Lemo and just not having any luck. Gonna try it with regular wire just to see how it vapes
Just built my newest lemo! Got a silver this time
Vaping at 30watts, and it's just a great great vape. My kayfuns and RUSSIANS are now permanently assigned to kanthal builds.
Burping out loud using Tapatalk
Vaping at 30watts, and it's just a great great vape. My kayfuns and RUSSIANS are now permanently assigned to kanthal builds.
Burping out loud using Tapatalk
Last edited:
I'm looking for an inexpensive (< $25) wireless charging station for the Vapor Shark. I know that VS sells their own, but need to have it delivered quickly and with the other order fulfillment issues they are having, I'd prefer to use Amazon 2-day shipping. Amazon does have a TON of them for sale, but I don't know if they will all work without issues with the VS (even though it is Qi-enabled). I know others have suggested the TYLT Vu, but this is outside my price range.
Anyone have direct experience using another Qi wireless charger with their rDNA30 or 40? What brand is it and would you recommend it?
Anyone have direct experience using another Qi wireless charger with their rDNA30 or 40? What brand is it and would you recommend it?
I have this one:
Amazon.com: PowerBot® PB1020 Qi Enabled Wireless Charger Inductive Charging Pad Station for All Qi Standard Compatible Devices Including Samsung, iPhone, Nokia, Google, Nexus, LG, HTC and Other Smartphones with Receivers (AC Adapter Excluded. 2 x Mic
But any Qi Wireless should work like this:
Amazon.com: Qi Wireless Charger, GMYLE® Qi Enabled Mini Charging Pad for Smartphones and Tablets (Black): Cell Phones & Accessories
The smaller disk type qi chargers need more precise placement which is why I love the Tylt Vu so much. It has a 3 coil design so it's more forgiving.
This is a nice form factor for the DNAs Amazon.com: Keedox® Qi Wireless 3-Coils Stand Charging Pad Stand Dock Wireless Charger for Qi Phones: Cell Phones & Accessories
or this if you are more laid back http://www.amazon.com/Standard-Wireless-Charging-Shipping-Distributed/dp/B00LE6X5VU
Both are 3 coil and the second is cheaper then FT
or this if you are more laid back http://www.amazon.com/Standard-Wireless-Charging-Shipping-Distributed/dp/B00LE6X5VU
Both are 3 coil and the second is cheaper then FT
Sending in my rDNA40 today. The screen glitching got worse. Went from happening every few days to happening every few puffs. Only happens on temperature mode too. Now I need to rebuild my tanks and attys with kanthal again because my only other regulated mod is a XPV DNA30. Hoping for a speedy turn around.
And I was just coming here to thank Tony for the link for the puck I bought. I tried it out with my phone and can already tell I don't like having to lay it flat and not be able to see what's going on unless I pick it up.
I just ordered the Itian A6 (your 2nd link) about a 1/2 hr ago. I like the TYLT-esque look without the TYLT price. It also has a lot of good reviews & comes in white........right up my alley!
Just built my newest lemo! Got a silver this time
Vaping at 30watts, and it's just a great great vape. My kayfuns and RUSSIANS are now permanently assigned to kanthal builds.
Burping out loud using Tapatalk
Lovely build Kiwi.
What wire is it and ID / Ohm's etc.
Just asking as I am waiting for my first regulated device, the VS rdna40 and looking for some TP builds to experiment with.
Ok guys....another update.
Yesterday... I told you all that I had talked to Vaporshark and that they had gotten more devices in stock and would start working on getting orders out.
This morning.....my rdna40 has shipped!!!
Just wanted to let everyone know...... Progress is finally being made
Yesterday... I told you all that I had talked to Vaporshark and that they had gotten more devices in stock and would start working on getting orders out.
This morning.....my rdna40 has shipped!!!
Just wanted to let everyone know...... Progress is finally being made
My lord I'm jealous.
Is this a Cyber Monday order? If so, am I allowed to ask how early in the day you ordered?
Inquiring minds and all that.
I have one of the first batch rdna40s. I use it all the time and I've been waiting for it to fail. Still no problems to report. It's been solid for me.
HMM. It's 28gauge Nickle that I twisted myself using a drill to work harden it.
Then it's 8 or 9 wraps (refer to picture) around 7/64 drill bit. Came out to 0.17 ohms. Working like a beast too. Currently VAPING it at 29 watts and it's a wonderful vape
Burping out loud using Tapatalk
Cool, I ordered the 26th, maybe I'll get an email soon.
sent using an alien .... probe
You got me this >< close to sending you my roll of 28g nickel so you could twist twist twist twist twist a baggie up for me!!!!
I'm looking at my drill thinking oh hell no.....I'd do some real damage up in here.
- Status
