What Temperature do you guys like?
- Thread starter TooMuchOrangeTang
- Start date
- th_trl_thread_readers 0
-
- Tags
- temperature control
- Status
Oh wow, a US citizen that uses degrees in Celsius, you don't see that very often 
My most used and fav overall temp is 215C (that's 420F for those too lazy to convert ) in Temp Ti mode on a Evic VT. I mention this in detail because I've read that the VT usually reads a little higher temp on the screen than it really is putting out in temp ti mode (it's my only mod so I have nothing to compare it to).
But it varies for me. I can go anywhere from 185 to 235 roughly, depending on my mood & juice. Beyond that it gets too hot for my taste. Usually I'm at 210 to 220 though.
My most used and fav overall temp is 215C (that's 420F for those too lazy to convert
) in Temp Ti mode on a Evic VT. I mention this in detail because I've read that the VT usually reads a little higher temp on the screen than it really is putting out in temp ti mode (it's my only mod so I have nothing to compare it to).But it varies for me. I can go anywhere from 185 to 235 roughly, depending on my mood & juice. Beyond that it gets too hot for my taste. Usually I'm at 210 to 220 though.
I run my Crown in tc between 65-85w and 450-515f depnding on the coil and juice that I have in the tank.
Sent from my GT-N8013 using Tapatalk
Sent from my GT-N8013 using Tapatalk
When I used Ni it was always 420F, just jumped back into the TC arena with SS and haven't quite found the sweet spot yet, but it will land between 420F and 450F. Anything higher and I might as well just stick with kanthal.
Essentially the same for me but for my 316L builds I'm pushing up to 480-500F for my sweet spot.
I'm mostly 380-430F. If I go much higher my juice starts to taste burnt. Much lower and there's little to no vapor production.
I'm a small guy, small lungs and D2L does not need to push a big cloud. I like my vape on the cooler side. Smooth, thick and cool.
I'm a small guy, small lungs and D2L does not need to push a big cloud. I like my vape on the cooler side. Smooth, thick and cool.
Running SS316L I am usually around this range as well. 420-480F sometimes maybe 500F with preheat wattage of nothing higher than 40-60W and time of no more than 1 sec. I prefer cool to warm vape, nothing too hot.
420 to 470 using ti coils between .3 and .5 ohms set to 40 watt max. i don't care for a hot vape, cool and dense for me.
Depends entirely on the tank I'm using.
At the extremes while I am at work I use a Nautilus (Yes, with Ni200 coils). I typically run it at 460F. At the other end of the spectrum is my Starre Pro which I typically run at 570F.
Anything above 460F on the Nautilus fouls the flavor, anything less than 570 on the Starre reduces vapor production. All my other tanks and coil builds fall in between those two extremes.
At the extremes while I am at work I use a Nautilus (Yes, with Ni200 coils). I typically run it at 460F. At the other end of the spectrum is my Starre Pro which I typically run at 570F.
Anything above 460F on the Nautilus fouls the flavor, anything less than 570 on the Starre reduces vapor production. All my other tanks and coil builds fall in between those two extremes.
- Status
Similar threads
