ZFM Zero Filler Mod
- Thread starter SCOTTYBALLS
- Start date
- th_trl_thread_readers 0
- Status
Hey SCOTTYBALLS, I just got your plugs in and I'm having some difficulty. I fill inside of the straw up to the rim of it and insert the plugs, but it doesn't seem to want to wick at all with my Freedom juice. Any advice?
The H cut and small hole doesn't want to wick hardly and the larger hole seems to flood a bit. I'm going to try changing out my atty and see if that helps lol. I'm pretty sure it's something I'm doing wrong haha.
There dose seem to be a bad batch of 510's atty's going around that are not wicking well.. Ive not had any yet but there are a few talking about it in the 510 model specific section.. might be able to get some info there too..
Changing out the atty worked (using H cut)! My guess is that the original atty had an abnormally low bridge so a slightly longer piece of straw should cure that one right up. Now I just need to vape on this atty to break it in haha. Thanks Scott, this sure as heck beats filler
. I'll probably be ordering some more from you in the near future to keep stocked.
Changing out the atty worked (using H cut)! My guess is that the original atty had an abnormally low bridge so a slightly longer piece of straw should cure that one right up. Now I just need to vape on this atty to break it in haha. Thanks Scott, this sure as heck beats filler
No problem glad you got it..
901 plugs will be up tonight if anyone is interested...
EDIT: wich are working really good on my 510 with a 901 cart... I think I like the hole better then the H cut for the 901
EDIT: wich are working really good on my 510 with a 901 cart... I think I like the hole better then the H cut for the 901
Last edited:
scotty you are the man! I was trying to do this mod on my 901 carts, im not sure what kind I have, they are the ones that came with my kit from litecigusa... they have a tip just like a swisher sweet flat tip or something. What tip is that? and will your plugs work with it? Its a D shaped opening.
Anyway the clear plastic covers that came with mine were WAY too thin, they were like a thin rubber and wouldn't work, I shall be ordering some of your plugs for the 901 if you confirm they work with my specific cart.
P.S. want some pics!
Anyway the clear plastic covers that came with mine were WAY too thin, they were like a thin rubber and wouldn't work, I shall be ordering some of your plugs for the 901 if you confirm they work with my specific cart.
P.S. want some pics!
Since originally buying these, I have moved on to 6V vaping. I was initially concerned about any cart delivering enough juice to keep the atty from frying. For the last 2 days, I've been using Scott's cart with the large hole and I have not lost a SINGLE atty. Prior to that, I was using PTB carts in my 6v mod and I popped 2 attys in 2 days.
Having the different size holes plus the H-cut means that with a little research, these carts can work for ANY PV. Thanks again Scotty!
Having the different size holes plus the H-cut means that with a little research, these carts can work for ANY PV. Thanks again Scotty!
Cool glad to hear! I dont have any HV pv's to test with so I was not sure if they could keep up... thanks for the info...
Go brush your tongue and wake up the taste buds
I think thats what happens if you vape the same stuff over a period of time.. just like if you are around the same smells for awhile your body starts to ignore it..
Uhm, sorry if i sound like a confused noob. But, without any filler, how do you not suck juice out the mouthpiece?
There are 2 air channels on all 510 carts the vapor runs threw the channels not the middle of the cart..
Any plans for the 801/302? I made one for the 510 and 801 and they both worked pretty good, but have no plans to try to make another one. I did order some from you though! Would love to be able to buy some for the 801.
Would love to be able to buy some for the 801.I placed an order for 2 packs of the multi packs today from ScottyBalls. Based on the reviews of this cart mod I am expecting excellent results. I have had it other mods, they all start off good then fail miserably. Time to give this one a try, hope it is worth the $50 US.
Any plans for the 801/302? I made one for the 510 and 801 and they both worked pretty good, but have no plans to try to make another one. I did order some from you though!
I have 801 carts on the way also a 801 passthrew and atty for testing
- Status
Similar threads
