The Geekvape E100i (Aegis Eteno i) Pod Mod, featuring a 3000mAh battery, a 4.5ml pod, 200-600F temperature control, and 5-100W of adjustable wattage. There are Smart/Power/Boosting/VPC/TC-NI/TC-TI/TC-SS/TC-TCR mode for your option. The smart mode can automatically select the suitable output to bring you the best flavor and prevent coils from burning out. Equipped with 1.06 inch TFT color screen, it can clearly show you the necessary vaping information.



Features:
1. Top Airflow Leakproof
2. Pod with High Compatibility
3. IP68 Rating
4. AS-CHIP 3.0
5. 100W Max Output
6. Internal 3000mAh Battery
7. P Series Coil Compatibility
...

Click here for more:

Geekvape E100i Kit: Geekvape E100i (Aegis Eteno) Kit

File under ; One thing leads to another ..

I drowned a couple of my favorite small devices ( vaporesso target mini 2 ) recently.
In the search for a suitable replacement, eventually decided on the Vaporesso gen fit 40 which came with the itank X using GTX coils.
Never really planned on using the supplied tank as I've been coiling & wicking either a Dvarw or Pioneer RTA for several years & have been happy with their performance, or so I thought.
On a whim, I primed & fit the 1.2 coil in the Itank X & gave it a try. Wow ! , apparently pre-made drop in coils have come a very long way in recent years. It was good .. really good, & only needed 10-11 W so battery lasted over a day in the tiny device !
On a recent vacation - I never once had to re wick or otherwise fiddle with a device over 9 days using one drop in coil in that Itank X all while getting great consistent flavor the entire time. Like that a lot.
These GTX coils seem to last much, much longer than my self coiled & wicked RTA's. The convenience is worth the $$ spent on coils given their long life & great flavor. Vaporesso has some things figured out it seems.

So there's the back story, since these GTX coils have performed so well, I'm contemplating the purchase of another Vaporesso tank compatible with those. Which one ? , it appears Vaporesso makes several other versions.
The one & only negative I can attribute to the ITank X & GTX coils is the system is a bit noisy compared to especially the Dvarw RTA's Ive been using. Not a deal breaker, but still ..

Looking for a recommendation for another Vaporesso GTX compatible tank with easy top fill, & if it were to be relatively quiet, that would be a very nice upgrade from the ITank X.

Thanks in advance to one & all, CBG.

.

I hope everybody had a good one

Big clean out

Pulse AIO Kit x3 Frosted Black, Frosted White, Frosted Green Original Packaging, Manuals, Pulse Vessels and VCC Coil Tanks $45ea
Jaybo Reuleaux DNA200w Triple Battery Mod Grey/Silver $40
Lost Vape Triade Reuleaux Triple Battery Mod Black/Carbon Fibre DNA200 Color $45 (Screen is slightly glitched.
But hardly noticable)
Lost Vape Grus 100w 21700 x2 $30ea
Digiflavor Z1 SBS Mod and Siren 3 RTA $35
VandyVape Gaur-21 Dual 21700 200w Mod Black/Blue Resin $45
QP Design x GM Mods Lethal RTA $45
Hellvape DESTINY RTA $15
Aspire Kumo RDTA x2 SS/Matt SS $30ea
All prices in AUD cash only.

All listed are in excellent condition and most if not all
come with original packaging.
Willing to ship within Australia at buyers expense.
Pickup in Seaford, Adelaide, South Australia

Hello folks and welcome back for today's review of the Pulse AIO.5 Kit that was sent to me from HealthCabin for review. The Pulse AIO.5 is a updated version from the original Pulse AIO having a stronger frame with a metal interface for the 510 nut and having a updated chipset as well. The Pulse AIO.5 can be customized with different panels and a 2nd set made for the round button is included in the kit, also this kit includes a round button with matching inner panel. For you temperature control users there are TC power modes including TCR along with other power modes ( Smart, Wattage, Voltage, Bypass ). There are 2 versions available with 1 having the Vessel Tank for drop in VVC coils with the other version having a RBA Vessel Tank as well as the standard Vessel Tank. The Pulse AIO.5 has a maximum power output of 80 watts and is powered using either a 21700, 20700 or 18650 battery, a 18650 battery adaptor is included in the kit. There's a lot to cover on this review so lets get started with some information from VandyVape and then I'll give you my assessment of the Pulse AIO.5 Kit with my honest review.





COLOR CHOICES





IN THE BOX





SPECIFICATIONS AND PARAMETERS





FEATURES


* Power Range: 5W-80W

* Battery: 1 X 20700 / 21700/18650 ( With Supplied 18650 Battery Adaptor )

* Mode: Wattage, Temp Control, Voltage, Bypass, Smart Mode

* Adjustable Positive Pin

* Operating Voltage: 3.2-4.2V

* Maxim Output Current: 32A

* Output Voltage:0.5-6.0V

* Charging Input Voltage: 5±0.25V

* Resistance:0.05-3.0ohm

* Charging Current: 1000mAh

* Open Circuit Protection

* Short Circuit Protection

* Over-current Protection

* 10 Seconds Cut-off

* Over-Temperature Protection

* Low-Battery Warning

* USB Type-C Port For Charging

* Vessel RBA Pod Capacity: 3.7ml

* Vessel Pre-Built Pod Capacity: 5ml

* DIY and Coil Compatible

* Pre-Built tank compatible with VVC Coil

* Curved 180 degree airflow with DIY Vessel RBA Tank


TWO VESSEL TANK CHOICES






VVC COIL VESSEL TANK







RBA VESSEL TANK





THREE BATTERY OPTIONS





TYPE - C

Like it says I’m mainly trying to hunt down a gem RTA v1 or v2 is fine, just needs all the parts.

In’ax v3 18mm and In’ax v5 would be pretty cool too but I rarely see Athea mods stuff

And hellfire attys just because i kind of have a thing for Genesis RDAs/RTAs right now plus this is like the most active B/S/T forum so I might as well shoot my shot.

Hey everyone, I bought a Vaporesso Swag PX80 a while back. I used it for a few weeks, and I noticed that it just leaks all the time. I made sure to make sure that the coils were seated in the pod tank the right way, and made sure that the drip tip lock feature was engaged to hold the coil in. Even after changing the coil, and the pod tank three or four different times it just continued to leak terribly. Has anyone else had this issue with this device? If so, have you found any way at all to fix it? Thank you.

Hello everyone, today is a new week, I would like to introduce to you a brand new electronic cigarette, lost vape ursa baby pro kit. As a very friendly electronic cigarette for beginners, it is very simple and easy to operate, and very easy to carry. In terms of operability, it provides you with buttons and inhalation activation methods, which are very user-friendly.

Paired with a 900mAh battery for battery life, which can basically maintain the vaping demands for most of the day. If the battery is exhausted, it can also be quickly charged through type-c.

The 2.5ml ursa nano pro pod cartridge, I don’t know if you are familiar with it, is also compatible with the ursa nano pro kit, with the adjustable airflow key, you can achieve MTL and RL vaping at the same time. UB Mini S1 Coil can also fully volatilize E-juice allowing you to enjoy a stronger flavour, and the life of the coil is also increased by half.


The intelligent lost vape quest chip provides you with overheat protection/short circuit protection/weak battery protection, giving you a great sense of security. Whether you put it in your pocket or hold it in your hand, it is light and comfortable without adding any burden.

We have prepared more affordable e-cigarettes in christmas vape sale uk, you are welcome to check them out.

You may also in fond of:
cheap luxe xr
xros 3 mini uk

The latest creation from Lost Vape - the Ursa Baby Pro Pod Kit is the professional version of the Ursa series.This Ursa Baby Pro Lost Vape Pod Kit is an electronic cigarette that fits perfectly in your pocket. It is a wonderful creation with which you can enjoy a great tasting vape with a maximum of 25W of power (adjustable from 5-25W). The model has a built-in 900mA battery and a C-type charging port with fast charging.

The new construction includes, of course, an air regulation to switch between MTL and RDL puffs.This high-tech Lost Vape Ursa Baby Pod Kit is equipped with a bright OLED screen to clearly display detailed data and provide you with easy operation.The upgraded version of the 2.5ml Ursa cartridge provides 50% longer vaping time and twice as many flavours!Constructed from high quality zinc alloy, it features a cartridge with integrated 0.6 ohm resistance or replaceable resistance cartridge.

More Details of Lost Vape Ursa Baby Pro
Dimensions: 46.5x15.2x15.2x71.6mm
2.5ml cartridge (with integrated resistor)
Made of aluminium alloy
Power: 5-25W
OLED display
Charging via USB-C
MTL/RDL output



Recommended products:
freemax starlux
smok rpm 100

Dear wholesale customers,

Here we bring Healthcabin new round of brand discount – December Brand Discount Round 2 for you to save more on different vape-brand products, with 2 vape deals in total.

Take the chance to join us while offer lasts~

A. 3% OFF for Selected Brands​

Promotion Details

• Discount: 3% OFF for 10 selected hot brands
• Date: 25th – 31st Dec, 2022(-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart.

Promotion Brands

B. Buy 1 Get 1 Free​

Another attractive promotion – buy 1 get 1 free is available for selected products, limited offer, first come first served! Check all selected products here.

With any questions, please feel free to contact your account manager.

Please view the December Brand Discount – Round 2 here.

I need some help changing from 6% nic to a 10% solution. I downloaded the e-juice me Up program but I can't seem to wrap my mind around this. Here is a very small batch that I used the 6% solution: 48 ml Nic, 16ml distilled water, 64ml flavoring, 192ml VG. The Nic is 10% in a 100%VG. I'm sure this comes easy to some of you....wish it was for me. I appreciate the help!!

Happy xmas

Looking for a Fatality

Hot off the heels of the release of the SL2 and G2 classes, SXMini have decided to go down the road of the Boro device, but the road they went down is a path much less walked compared to the "standard" Boro tank device, think DotMOD DotAIO instead of the usual BilletBox...

CHAPTERS

00:00 - Intro and specs
05:00 - Close Up
15:00 - Vape
16:00 - Thoughts

Rumble - https://rumble.com/v21vn8u-the-sxminiyihi-vi-class.html?mref=z0wfa&mc=kybb8

YouTube - Login to view embedded media

Just wanted to take a Moment to Wish Everyone a Very Happy Holiday. And Hope that tomorrow finds You and Yours in Good Health and Spirits.

Hello again. I’m here once again with yet another review for your viewing pleasure. At least I hope it’s a pleasure. I was sent the Wotofo Profile X RTA by Wotofo in order to provide you with a fair and honest review. The X is a 28mm RTA that comes with three different types of mesh sheet coils as well as two standard type coils. It has a liquid capacity of 5ml/8ml depending on whether you choose to use the straight glass pre-installed or the spare bubble glass that is included. It is a top airflow RTA so you won’t have to worry about leaking and uses honeycomb style airflow in two rows of holes. Besides being a mesh tank, it has four holes where you can insert two standard coils. It promises that you can also use it in single coil configuration but we will have to see how that goes since a lot of dual coil tanks don’t perform all that well with single coils. Like most tanks these days it has a ¼ turn top cap that is removed to find two large fill ports underneath.





WHAT’S IN THE BOX?

1* Wotofo Profile X RTA
1* nexMESH Chill A1 0.15ohm
1* nexMESH Turbo A1 0.13ohm
1* nexMESH Extreme A1 0.16ohm
2* Framed Staple Clapton Ni80 0.33ohm
3* 6mm Thick Cotton Strip
2* 3mm Thick Cotton Strip
1* 8ml Bubble Glass
1* Mesh Bending Tool
1* Cross Head Screwdriver
1* Accessory Bag
1* User Manual

SPECIFICATIONS:

Size: Φ28*43.7mm (with drip tip & 510 pin)

E-liquid Capacity: 5ml (straight edition), 8ml (with bubble glass)

Filling: Top filling

Airflow Type: Adjustable top airflow

Build Deck Diameter: Φ28mm

Threading: 510 thread

Supported Coil Type: Single mesh coil

Single wire coil

Dual wire coil

Fit For: Wotofo nexMesh Chill/Turbo/Extreme Coil

Cotton Deck Material Ceramic

Drip Tip Material & Connection: Size 810 colored resin

Tube Material: PCTG for straight tube, glass for bubble tube

Insulator Material: German PEEK

Color: Black, SS, Gunmetal, Gold, Blue, Rainbow

FEATURES:

1. Supports both mesh coil and single/dual wire coil

2. Fit for all of the Profile mesh (nexMesh Chill/Turbo/Extreme)

3. 5ml/8ml e-juice capacity, top airflow system

4. Honeycomb airflow control, smooth vapor & delightful flavor

5. Quarter turn top fill system with dual fill ports

INITIAL THOUGHTS:

The packaging for the Profile X is the same as what I’ve seen from Wotofo in the past with other samples that I have reviewed. The front has a clear cover with the Profile X and Wotofo names printed on it. You can clearly see the tank and the spare bubble glass that boosts your liquid capacity from 5ml to 8ml. This one is a little different as it only has some warnings and company information on the back. The contents list is printed on the side of the box. It comes with quite a bit of stuff which includes two Ni80 coils rated at .33 ohms, three different mesh strips, cotton threads for all three mesh strips as well as cotton for the two Ni80 coils, a small phillips screwdriver, a coil shaping rod for the mesh, and an accessory bag with extra screws and o rings.

I personally don’t care much at all for the really short drip tips that come with Profile X. It is a nice looking resin tip but I don’t like putting my mouth right on top of the tank like that so immediately changed the drip tip to a taller 810 tip. As you can see in the picture below, the Profile X is easily broken down for cleaning or changing out the pre-installed straight 5ml glass for the 8ml bubble glass.

The top cap uses the normal ¼ turn bayonet style connection. I personally found the top cap a little bit thin and not the easiest to get a grip on but had no real troubles with it. There is a single o ring on the bottom of the top cap to help seal the tank from leaking. One thing I thought that was odd at first is how deep the fill ports are down inside of the opening once the top cap is removed. I tried to get a picture for you in the second one below but don’t know how good it is at showing how far down the fill ports are. From what I have read, this is so that you can use any type of bottle for filling including a glass dropper bottle without making a mess. I found it odd when filling with my usual 50ml plastic bottles.

I don’t think I’ve seen a build deck quite like the one in this rta. It not only has two screws with one on each side to lock down the mesh strips but also has two other screws on each side that allow you to install two standard coils and lock down each leg individually. So there are the two clamps with the ceramic spring loaded center that pushes the cotton against the mesh and also four holes with individual screws to install standard coils. Unfortunately the clamps for the mesh are not spring loaded.

The airflow for the Profile X consists of two rows of nine honeycomb holes on each side for a total of 36 airflow holes available. This is easily adjusted with the airflow control ring that moves with just the right amount of resistance.

I’ll be honest that I’ve never really been a big fan of mesh coils so was a little apprehensive starting out about testing this one. My first build was with the .15 mesh strip in one of the two tanks that I received for the review. I bent and installed the mesh and used one of the included cotton threads to wick the tank. I cut the wick down at an angle from the top edge near the mesh to the end of the wick. Then thinned out the tails quite a bit but still had plenty of cotton to fill the ports. Upon initially trying the tank, I kept getting a strong cotton taste no matter where I set the wattage. I finally pulled the deck out and raised the shoulders of the wick some thus pulling the tails up a little and that seemed to help some. I settled around 55 watts but felt like I never really got rid of the cotton taste completely. It wasn’t a dry hit, but just the taste of cotton. I checked a couple times and my wick was fully saturated.

The second tank I decided to install the two Ni80 coils. I made the mistake of cutting the legs at 5.5mm and never could get both coils installed properly. I gave up on those and installed a couple of the 316 flat braided coils that I keep on hand. This time I cut the legs longer at 6.5mm and it was a little easier. The next time I install dual coils in this tank I will cut them at 7 or 7.5mm to make them a little easier to work with. The flavor was much better and did not get the cotton taste like I did on the first mesh attempt. My dual coils ended up at .15 ohms and have been running them at 58 watts on a DNA mod with good results.

I still had two more mesh strips to test so decided to put one in each of the tanks. I honestly was kind of dreading this after my initial results with the first mesh strip test. I went ahead and built each of the two sample tanks with a different mesh strip. The Turbo strip went in one tank in one tank with a dinner lady lemon tart mix while the Extreme went in the other with a lemon pound cake recipe that I use very often for review testing. I trimmed the wicks down at an angle like I did the first time but this time thinned the tails out quite a bit more and trimmed the tails a little more so that I had less cotton going into the wick holes. This proved to provide better flavor than my initial test and no cotton flavor like I got before. With this in mind, I can only think that my first attempt at a mesh coil with this tank resulted in less than optimal results because I didn’t thin the tails out enough. Even if you think you have the tails thinned enough, go ahead and thin them out more.

FINAL THOUGHTS:

I feel like Wotofo has done a good job coming out with yet another good rta. Having the option of running mesh as well as single or dual standard coils makes it very versatile and should meet the needs of many vapers. Starting out with a 5ml capacity and being able to increase it to 8ml with the use of the included bubble glass is definitely a plus with a tank like this targeted at high wattage use.

I was unable to use any of the mesh coils at the rated wattages with any comfort. I felt like the second two mesh coils operated well at the 45-50 watt range. It definitely helped to thin the tails out more with these two than I did with the first test with the Chill mesh strip. The dual standard coils were a little hard to install and felt like the four grub screws didn’t have very good heads on them and were a little difficult to tighten without feeling like I was stripping the heads with the included screwdriver. I had better results using my own precision screwdriver.

Overall I feel like Wotofo has done a nice job designing as well as executing the manufacture of the Profile X RTA. If you like high wattage vaping and having the versatility of being able to use both types of coils then this one might be a good fit for you.

I would like to thank Wotofo and Cara for sending the Wotofo Profile X RTA for this review. Thanks as always to the readers for making it to the end of another review in a long line. Below is a link to the website for you.

Profile X RTA - The latest flavorful single mesh RTA by Wotofo

Jma e liquid all 3 mg steeped for 2 weeks £80 postage included

Check out the newly released excellent vaping device from Uwell: The Crown M Kit is supported by a built-in 1000mAh battery to satisfy your daily vaping and entertaining wheel power adjustment for convenient use. It features the independently controlled Twin-Coil design that supports dual output modes(alternative/mutual working mode). Under the alternation working mode (suitable for MTL), the resistance is 0.8Ω and it has clearer layers of taste & longer coil life's span. Under the mutual working mode(suitable for DTL), the resistance is 0.4Ω and it is able to bring thicker cloud and richer taste. In addition, it is equipped with the spare 0.6Ω coil in the package for RDL vaping and please note that the mode-choosing function is disabled with this standard coil. The current working state can be demonstrated by the display between the transparent shell and built-in circuit board. It also features 4ml e-juice capacity, easy top filling system, great leak-proof design and precise airflow adjusting valve. With the improved pod bottom structure, it can elevate the e-liquid utilization. By adopting Uwell's upgraded Pro-FOCS flavor adjustment tech, it can ensure the restored flavor and premium taste. Just get it.

More Details of Uwell Crown M
Dimensions: 52.6mm by 82.3mm by 26.8mm
Pod Capacity: 4mL
Chassis Material: PC,PCTG
Wattage Range: 5-35W
Battery Capacity: 1000mAh
Charging Port: Type-C
Operation: Dual-Activation (Draw+Button)
Fill System: Top Filling System



Recommended products:
drag 4 vape
smok propod

Hello everyone, today is also a happy day! What I will bring you is uwell crown m, a pod mod kit with powerful performance. First of all, from the appearance, you will find that it is very different from the previous electronic cigarettes. It adopts a futuristic design, and the shell is made of transparent PCTG material, which is safe and durable. Afterwards, you will definitely be attracted by some of the designs on the device. You will see a scroll wheel on the top, its main function is to adjust the power, the power becomes smaller when it is turned to the left, and the power is increased when it is turned to the right.


On the left side of the device, you will see an adjustment button, and its main function is to help you quickly customize the airflow, loose or tight airflow can be determined according to your preference. The innovative design adopted this time is dual-coil output, which allows two coils to work at the same time or alternately, which is not only more flexible but also can meet both MTL vaping and DTL vaping.

The 4ml uwell crown m pod not only has a large capacity but also doubles the vaping time. The 1000mAh built-in battery can basically meet the needs of vaping for a day, and filling the top with e-liquid will not stain your hands, which is more convenient and quick.

Such a very user-friendly and technologically advanced e-cigarette deserves more attention from vapers. We have provided you with this new product at vape online uk. Of course, if you are interested in more electronic cigarettes, we sincerely welcome you!

You may also in fond of:
smok solus g
xros 3 mini review

So I have been off cigs for about 2 yrs now and vaping. For some reason i have been huffing up tan/brown phlegm from throat and its thick. I have been to 2 drs and sont find anything abnormal. I can run fine in my daily exercise routine and the only question I have is if anyone else has had this problem, i have heard nic oxidizes and turns brown when comong in contact with oxygen. Wouldnt it be reasonable to say that the juice is oxydizing thus giving that tan color to phlegm sometimes. Ususally its clear but when it sits there for a while get that yellow/tan hue to it. Any insight would help. Again i already been to Drs.

Alas, we were inattentive and the old thread finally closed. RIP, old friend. You served us WELL.
eGo ONE tank series – CLR coil

That said, it seems there's a vendor out in Las Vegas that's saying they have 1000 CLR coils in stock, and a decent price. I've emailed them (to confirm existence), but have been met with silence.

Does anyone here know of "DoVaping"? I'm hesitant to send them money, not knowing if it will be lost forever.

Joyetech Ego One CLR Atomizer Head
1000 in stock? That sounds VERY ODD to me, all things considered. Call me skeptical.

​

SUPER CHRISTMAS SALE ENDING SOON!!!!!!!!!!!
USE COUPON CODE (CS15) TO GRAB 15% DISCOUNT STOREWIDE TILL 25th DEC, 2022

Coupon Code:2022Xmas
Valid Time As Belows:
2022-12-23 00:00:00 - 2022-12-25 23:59:59 (UCT-7 / Mountain Time)
Quick Link>>Coupon & Discount - 3FVape