Have you ever broken the glass tube of your vape? Well, I know it sucks…It has happened to me! I accidentally dropped my vape on the floor and there it was, the Pyrex glass broken, and e-juice spilled on the floor. To be honest, it wasn’t that easy to replace the glass and that’s why I want to share my experience with you. Some vapers have shared their experiences with a broken vape glass tube and how after inhaling from the drip tip, they felt a small but razor-sharp piece of glass. Therefore, if you ever break your vape glass tube, follow this guideline to avoid injure your mouth.
Check detailed information here:How to Replace a Broken Vape Glass Tube [Tutorial]

Hello guys. This time let's look at the Thor AIO Kit by Think Vape. If you are looking for a cheap but decent vape kecil kit, I think it will be a good choice. Ok, here we go!

Think Vape Thor AIO Kit requires a single high drain 18650 battery for operation. Additionally, it does have an impressive 80W max output. All of this available power is due to its proprietary chipset. Not only will you get 80W out of this compact device, but there's a ton of safety features built in.

The materials used to construct this device are ABS and PC, which makes it extremely lightweight, even with an installed battery. Furthermore, it's shaped perfectly, so the Thor AIO Kit is super comfortable to hold. Like we've seen before with their past devices, this one features a graffiti art style. On the front, you'll notice the display screen which will display your wattage output, current battery life, coil resistance, voltage output, and even a firing timer. Underneath is where you'll find the micro USB port and wattage adjustment buttons.

As for pod, it can store up to 3ml of e-juice. Filling it can be done from the side. What's great about the Thor AIO is that it is compatible with the replacement coils that were used with the Think Vape Zeta, and even the RBA section and pod cartridges too. However, you do receive to mesh coils inside of the packaging. Lastly, you can control the airflow from the bottom of the coil head. Think Vape has brought another awesome device to the market that not looks good, but won't cost you much at all. At under $16, it's a complete steal!

You may also like: beli alike kit

I love this mod and its tank. However, they discontinued it.

I had one unused piece that was working. It seems it is dead. I ordered 3 new pieces, and they all came dead as well.

This is the battery. Where do I find the same battery?

Many thanks!

Hi vapers, today I'll introduce the lastest starter kit from Augvape, its name is Augvape VX217 Kit.

Augvape VX217 VW/TC Starter Kit, upgraded from VX200, is first mod that can reach 12W, suitable for high ohm coil. Augvape VX217 box kit consists of VX217 mod and Intake Sub Ohm Tank. Augvape VX217 box mod, made of Zinc alloy, is powered by dual 18650/20700/21700 batteries with max 217W output. Augvape VX217 features 1.3 inch color screen with 240*240RGB resolution to offers hundreds of color theme options. The UI simulates the car dashboard can show vape time, mode, wattage, voltage, resistance, batteries life. Augvape VX217 mod supports VW/ VV/ Bypass/ TC modes to meet needs. Augvape Intake Sub Ohm Tank adopts top to bottom airflow, top refill with leakproof design and innovative clapton mesh coil for better flavor and longer lifespan.

Parameters:
Augvape VX217 Mod
Size: 80* 49* 42mm
Material: Zinc Alloy
Battery: dual 18650/20700/21700 batteries(not included)
Output: 5-217W
Voltage range: 0.5-12V
Display: 1.3 inch color screen
Modes: VW/ VV/ Bypass/ TC modes
Resistance range: 0.05-3ohm
Charging current: 1.2A quick charge
Augvape Intake Sub Ohm Tank
Size: 25* 46mm
Thread: 510

Features:
First mod that can reach to 12W, suitable for high ohm coil
Powered by dual 18650/20700/21700 batteries with max 217W output
Minimalist design with spin button and big fire button
1.3 inch color screen with 240*240RGB resolution to offers hundreds of color theme options
Excellent UI simulates the car dashboard to show vape time, mode, wattage, voltage, resistance, batteries life
Supports VW/ VV/ Bypass/ TC modes
Simple circuit design and less wire, last much longer
Top to bottom airflow
Top refill with leakproof design
Innovative clapton mesh coil for better flavor and longer lifespan

Packages:
1* Augvape VX217 Mod
1* Augvape Intake Sub ohm tank
1* Type-C cable
1* Battery adaptor sleeve
1* Bubble glass
2* clapton mesh coils
1* O-rings
1* User manual
1* Warranty card
1* Desiccant

Hey guys. For RTA vape, which kind do you like best? This time I'm gonna introduce the Merlin Nano MTL RTA by Augvape. Just give it a shot if you like.

Augvape Merlin Nano MTL RTA is designed specifically for mouth to lung vaping and has a few features making it quite unique even when comparing it to some of the Best RTAs. Firstly, it sports a base diameter of 18mm, so it'll be a great match for your small mods. However, a 22mm beauty ring is included if you wanted to make the base just a bit larger to match other devices. Secondly, it features an adjustable airflow system using inserts. Included in the packaging, you'll receive three different airflow inserts.

One features a 1mm airflow hole, the second features a 1.2mm, and the last has dual 1mm airflow holes. The Merlin Nano RTA does have a 2ml e-liquid capacity, but a bubble tank is included if you wanted to increase the capacity to 3.5ml. Lastly, it features a traditional bottom fill system and a gold plated 510 connection. All in all, if you're a fan of mouth to lung vaping, and looking for a new and unique RTA, then this is the perfect deal for you!

You may also like: osmall pod indonesia

Innovations help Vladdin to create their products and making itself good enough to stand with some great vape brands like SMOK, Vaporesso, VOOPOO and so on. Then what’s new about Vladdin recently?

Here comes the Vladdin JET kit, you may reminds SMOK RPM40 from the appearance of Jet Kit, so today, let’s have a comparison of those 2 pod mod kits.



Vladdin JET Pod Mod Kit
Main Features:
1. Unique air path delivering fantastic flavor
2. 0.6Ω & 0.3Ω mesh coil for premium vaping
3. 1500mAh battery can last up to 36 hours
4. 5-40W wattage range, Type-c fast charging
5. Six colors adjustments make you device unique
6. 4.5ml/2ml pod, easy to fill & anti-leakage

Vladdin JET vs SMOK RPM40

Elego provides worldwide shipping and competitive price for all the customers, login at Elegomall to check the latest vape kits!
Register to get your counpon that worth $10,000 (wholesale only) and 20% OFF counpon for retail.

hello everyone! i would like to know if any of you disassemble the mach on3 because mine has a problem and i don't know how to open it to fix it....the cable to the battery negative is disconnected for some strange reason and I need to solder that.

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Box Mod at present? Today let me introduce you one mod named Original Vaptio Capt'n 220W TC VW Box Mod. Now let’s take a closer look at the mod below.

Original price $67.99, now only $14.99, 78% off you can't miss!!

The Vaptio Capt'n 220W Mod is an innovative TC VW Vape Box Mod, which perfectly compatible with Vaptio Paragon Tank (Not included). Capt'n 220W Mod is powered by Dual 18650 batteries (Not included) with output wattage range from 10W to 220W, and comes with Zinc-alloy frame and IML panel body. Capt'n Mod supports stable and high performance VW / TC modes with 0.005s fire speed. Equipped with 1.3-inch TFT color screen, firmware upgradeable, the Vaptio Capt'n Mod will bring you a good vaping experience.




Main Features:
Dual 18650 Batteries TC MOD with 220W Max Power (Not included)
Zinc-alloy frame and IML Panel Body
0.005s Fire speed with 6 intelligent output modes
1.3-inch TFT Color Screen
Firmware Upgradeable

If you want to get one, you can come here:
Original Vaptio Capt'n 220W TC VW Box Mod >>>

Battery you would need:
3FVAPE - Battery >>>

Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>
-------------------
Products with 24HRS tag can be shipped in 24hrs after payment confirmed on business day.

If you want to order 24HRS item directly, click on this link to purchase >>>

Looking for the following:

Joyetech Egrip OLED
Joyetch Egrip VT

I am not interested in Egrip II's or the original Egrip (no LED).

I can Paypal your or Venmo.

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Mod Kit at present? Today let me introduce you one mod kit named Original Vaptio Wall Crawler 80W TC VW Mod Kit with Frogman Sub Ohm Tank. Now let’s take a closer look at the mod kit below.

The Vaptio Wall Crawler 80W TC VW Starter Kit consists of Vaptio Wall Crawler TC VW Box Mod and Frogman Sub Ohm Tank. The mod kit provides a highly advanced, compact vape system with 80W of maximum power and full temperature control suite to pair with the ergonomic Throne Sub Ohm Tank. The Wall Crawler 80W Box Mod is creatively crafted with spider-inspired designs, it is powered by Single 18650 (Not included) with Max. 80W Output, it comes with a full color 1.3" OLED Display and stealth firing button. The internal chipset provides rapid firing time, equipped with temperature control settings ranging from TCR adjustments and normal smart vaping modes. The Frogman Tank holds up to 5ML of your favorite e-juice, Maintaining performance capability, the throne implements the Vaptio's new Hotswap Technology, which makes the coil installation more convenient. Easy top refill and adjustable bottom airflow design, funneling upwards to create an effective passage to optimal flavor.




Main Features:
Battery Type: Single High-Amp 18650 Battery (Not included)
Size: 73 x 50 x 28.5mm
Material: Zinc Alloy
Wattage Output Range: 7~80W
Min Atomizer Resistance: 0.05ohm
Temperature Range: 200~600F
Supports Ni200 Nickel / Titanium / Stainless Steel Heating Elements
TCR Adjustments
CCW / CCT Power Curve Mode
Smart Mode: Normal / Soft / Hard
Full-Color 1.3" OLED Display
Stealth Firing Mechanism
Ergonomically Placed Adjustment Buttons
Top-Loaded Threaded Battery Cap
510 Connection

If you want to get one, you can come here:
Original Vaptio Wall Crawler 80W TC VW Mod Kit with Frogman Sub Ohm Tank >>>

Battery you would need:
3FVAPE - Battery >>>

Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>
-------------------
Products with 24HRS tag can be shipped in 24hrs after payment confirmed on business day.

If you want to order 24HRS item directly, click on this link to purchase >>>

Product introduction
LTQ T-FLASK CBD Mod adopts the special "C" shape curve design, it is a compact and small CBD mod. Powered by internal 650mAh battery and supports voltage output adjusting. The T-FLASK fits for all CBD atomizers (Less than 1.1cm) with a convenient magnetic connection.

Parameters:
Material: Aluminum
Size: 52x 43.1x 16.7mm
Atomizer Diameter: 1.1cm
Resistance Range: 1-3.0ohm
Battery: Internal 650mAh battery

Features:
-Smart preheat function
-Adjustable voltage output
-Convenient magnetic connection
-Fit for all CBD atomizers (Less than 1.1cm)

Package includes:
1x T-FLASK
2x Connector
1x USB Cable
1x User Manual

The Voopoo Drag X mod pod kit is a sub ohm pod kit intended for intermediate to advanced users. Powered by a single 18650 battery (sold separately), this innovative pod device combines style with technological endeavour, courtesy of the new generation GENE.TT chipset which gives access to a range of output modes including Variable Wattage and the unique Score mode.



More Voopoo new products information,just visit this link: Voopoo

Think Vape Thor AIO Kit

Thor AIO Kit is a pod mod system kit that comes with ergonomic design, proper volume and compact size. It comes with a 3ml pod cartridge that is large enough to provide you with long-lasting vaping experience. And adopting adjustable airflow, it also supports 0.2ohm mesh coil and 0.5ohm mesh coil, both of which will satisfy your vaping demands. Besides, powered by a single 18650 battery, it features adjustable power in the range of 5 to 80 watts. And equipped with a screen, it will display you the vaping details. What's more, there are multiple protections to ensure your safety, such as Intelligent Atomizer Recognition, Puff Monitoring System, Over-temperature Protection, 10 Seconds Cut-off, Short Circuit Protection, Low-Battery Warning, and so on. Last but not least, Think Vape ZETA Pod Cartridge and ZETA Coils are compatible with Thor AIO Kit.


Details:

1. Come with 3ml large e-liquid capacity
2. Driven by single 18650 battery with 80W max output
3. Adopt adjustable airflow
4. Utilize 510 drip tip
5. Equipped with a screen
6. Compatible with mesh coil
7. Provide 6 protections, like Intelligent Atomizer Recognition, Puff Monitoring System, Over-temperature Protection, 10 Seconds Cut-off, Short Circuit Protection, Low-Battery Warning

Anything out there that has the same nicotine strength as 3mg nicotine ejuice?

I received hellvape rebirth rta from sourcemore for the purpose of this review.

Hellvape rebirth rta colors:

- Blue
- Black
- Full black
- Gold
- Gunmetal
- Purple
- Rainbow
- Ss





Specifications:

- Diameter: 25mm
- Height: 50mm
- Drip tip: 810 drip tip
- Material: Stainless Steel+Pyrex Glass
- Thread: 510 thread




In the box:

- Hellvape Rebirth RTA 2ml
- Bubble Glass Tube 5ml
- Accessory Bag
- Extra 810 drip tip
- 510 drip adapter
- User Manual







Rebirth rta is designed by MikeVapes and made by Hellvape. This is a dual coil atomizer, it is 25mm in diameter and height of the atomizer is 50mm. Atomizer comes in really nice package, with this atomizer you will receive bubble glass tank, extra 810 drip tip, 510 drip tip adapter and you will receive tool that you will use to measure coil leads, but in the package you will not receive coils. Build quality of the atomizer is good, everything is as it should be and there is nothing to complain about. You can buy this atomizer in 8 different colors which is really nice. On the atomizer you can see some details, on the top cap you can see some details, also you can see details on the airflow control ring, on the chamber you can see logo and from the bottom of the atomizer you can see standard engravings.









Atomizer comes with 810 drip tip pre installed and I really like how it looks, it stays really nice in the place and it is comfortable for using. With this atomizer you will receive extra 810 drip tip and this drip tip is also good in my opinion, but in case that you don't want to use any of them, you can use any other 810 drip tip that you have here. In the package you will also receive 510 drip tip adapter so you can use even 510 drip tip if you want here.







This is a top fill atomizer, on the top cap we have details that helps when you want to take of the top cap. We have locking system here and all you need to do is a quarter turn and you will be able to take of the top cap. When you take of the top cap you can see two big fill holes and you can fill the tank with any bottle which is really good. So, in my opinion top fill system here is really good and you can fill the tank really fast.







You will receive the atomizer with regular glass tank pre installed, capacity with this tank is 2ml, but in the package you will receive a bubble glass tank, with bubble glas tank capacity is 5ml which is really good capacity and use this atomizer with bubble glass tank. Tank stays really nice on the top o ring and you can unscrew only the base and change coil or cotton while you still have e liquid left in the tank.








On the build deck you can see two slots for coil leads and screws here are good, so far I didn't have any problems. On the build deck you can also see 4 wicking slots. This is a really nice looking deck, here you can see two blocks and on each block you can see airflow holes, we have here honeycomb airflow which is really nice. On each block we have 14 airflow holes on the top and 2 airflow holes on the inner side.
Building here is not that hard, but still it is a bit harder than when you have 4 slots for coils leads. In the package you will receive tool that you will use to measure the length of the coil leads and when you clip the leads you need to put them in slots, screw in both screws and bend the coils above the airflow. With this atomizer it is very important to place coils good and it is also important to wick it really good because coils are placed pretty much high.
On the airflow control ring you can see two airflow slots. You can adjust the airflow without any problems and details on the airflow ring will help you a lot. You can take off the airflow control ring which is really nice because you can really easy clean the atomizer.











My thoughts about this atomizer:

So, you can buy this atomizer in 8 different colors. Build quality of the atomizer is good and everything is as it should be. Package is really nice, you will receive bubble tank, extra 810 drip tip, 510 drip tip adapter and tool for the coils, but in the package you will receive no coils which is con. Drip tips are comfortable for using and I like to use pre installed drip tip. Top fill system is good, fill holes are big and you can fast fill the tank. Capacity with regular glass tank is 2ml which is small capacity for me and I like to use bubble glass tank with 5ml capacity. It is really good that you can change coils or cotton while you still have e liquid in the tank. Building here is not that hard as I said, but it is still easier when we have build deck with 4 posts, tool from the package helps a lot with building here. It is really important to wick this atomizer right and if you wick it right it will perform very good. I tried here 2.5mm coils and 3mm coils and in my opinion this atomizer is better with 3mm coils. Vapor here is really dense and vapor production is pretty much good. Flavor is good because we have really good airflow, coils are placed high and chamber has conical shape, so basically flavor can't be bad. Airflow is very smooth and it is slightly restricted, this is atomizer for people that like a bit restricted lung draw. So basically considering everything here, this is a good atomizer and it stays in my collection because I like it a lot.



Cons:

- No coils in the package
- Building and wicking can be hard for beginners




Pros:

- Good build quality
- Color options
- Bubble tank in the package 5ml
- Tool to measure length of the coil leads
- Good drip tips
- Extra drip tip
- Vapor is dense
- Flavor is very good
- Nice honeycomb airflow
- Easy to fill
- No leaking

Thanks sourcemore
You can buy it here: Rebirth rta
Discount code, to get it for only $19.94: rebirth

Choose yours here: In Stock Today

I recently bought myself some Drip Hacks Congo Bongo, a diy starter kit, as I've heard a billion great reviews of their kits. I did everything in the instructions and a 1 week steep was recommended, but it still smells slightly chemical-y plus looking a bit cloudy. Does it just need more time or is it a lost cause?

The Artery Nugget GT is the best example of how far the pod mod market area can go before it hits a dead end. With a dual battery, high wattage base, pod tank, and also 510 plate along with a rebuildable head for the pod tank, the Pod Mod doubles up as a dual battery mod and a pod system in one go.

═╣ Artery Nugget GT ╠═

00:05 ◄ Intro, specs and close look
17:33 ◄ Vape
19:14 ◄ Thoughts

Login to view embedded media

can anyone reccomend a moderately priced unit w top fill that doesnt leak? tia

So I'm just wondering what everyone's favorite flavour is. I'm really curious as to what everyone of you considers their personal favorite, and maybe why too?

Anywho hope you're having a good day

Hello i am new here and any responses would be greatly appreciated. I am building a fully mechanical 21700 box today. I have everything figured out except the volt meter. I was wondering how to install it. Is it as simple as positive to positive and negative to negative? I do a decent amount of electrical at work so I'm pretty confident I know what to do but would like some outside input since this is my first mod. Especially since it's mechanical.

VOOPOO Replacement PNP Tank is designed for Voopoo Drag X 80W Mod Pod Kit and Voopoo Drag S 60W Mod Pod Kit 2500mah. VOOPOO PNP Tank, made of PCTG & stainless steel, comes with 4.5ml magnetic suction pod with most sanitary way of filling oil. VOOPOO PNP pod adopts infinite airflow system and is compatible with all PnP coils including RBA.


Parameters:
Size: 26* 50mm
Material: PCTG & stainless steel
Capacity: 4.5ml
Resistance: 0.15ohm PnP-VM6 mesh coil(60-80W)
0.3ohm PnP-VM1 mesh coil(32-40W)


Features:
Compatible with all PnP coils including RBA
Bottom filling design
Innovative infinite airflow system

Packages:
1* PnP Cartridge
1* PnP-VM1, 0.3ohm
1* PnP-VM6, 0.15ohm
1* User Manual


--------------------
You may like:
1. Voopoo Drag X 80W Mod Pod Kit

2. Voopoo Drag S 60W Mod Pod Kit 2500mah

3. Voopoo PNP Coils for Drag Series and VINCI Series 5pcs

4. Voopoo PNP RBA Coil for Drag Series and VINCI Series

Product introduction
Rincoe Manto AIO 80W Kit is specially powered by a single 18650 battery cell and adjustable from 1 to 80 Watts and charged via Type-C USB port. Included two types of 510 drip tip, Manto AIO supports both DTL and MTL vaping. 0.49 inch OLED display offers user interface data with a high-tech look and design. The pod of Manto AIO is compatible with mesh coil/ regular coil and Rincoe Manto AIO RBA coil to meet different vaping needs and 3.0ml capacity with visible e-juice level is very convenient.

Parameters:
Size: 45x 24.3x 80mm
Firing time: 0.001S
Charging: Type-C port
Charging voltage: 5V/ 1A
Material: Aluminum alloy
E-liquid Capacity: 3.0ml
Output wattage: 80W (Max)
Screen: 0.49 inch OLED screen
Drip Tip: 510 MTL/ DTL drip tip
Airflow: Bottom adjustable airflow
Coil: Mesh coil/ RBA coil/ Regular coil
Battery: 1x 18650 battery (Not included)
Protections: Reverse battery/ over-heating/ low-voltage/
overload/ short-circuit/ max power/ 10s cut-off/ high-temperature protection

Features:
-Support both DTL and MTL vaping
-Stunning design and compact size
-Single 18650 battery with 80W max output
-Visible cartridge and adjustable airflow
-Compatible with mesh coil/ regular coil and RBA coil

Package includes:
1x Manto AIO Kit (DTL Drip Tip)
1x Manto AIO Pod (Pre-installed 0.3ohm mesh coil)
1x Type-C USB Charge Cable
1x Spare MTL Drip Tip
1x Certificate Card
1x Warranty Card
1x User Manual

Hello guys,
Steam Crave released one flavor and cloud beast: Steam Crave Aromamizer Ragnar RDTA 35mm,which is a self-winding tank atomizer with a diameter of 35mm. It is not suitable for all box mods, but it can achieve very good results on internal models,such as Steam Crave Hadron 220W Box Mod with Yihi SX490 or Steam Crave Titan PWM MOD. There are 3 colors for your choice.

Steam Crave Aromamizer Ragnar features adjustable smooth bottom and side airflow for medium or high power vaping. Aromamizer Ragnar adopts postless deck with bottom honeycomb air holes. Aromamizer Ragnar RDTA is compatible with Steam Crave Aromamizer plus decks for different DIY fun.
It supports 80% side airflow and 20% bottom airflow. Therefore, you can make the best adjustment according to your needs. The 810 Wide Bore drip tip with a diameter of 22mm is made of resin and has a stylish honeycomb design that fits perfectly with the Aromamizer Ragnar RDTA.


Parameters:
Size: 35* 58mm
Material: SS & Glass
Capacity: 18.0ml
Drip tip: 810 drip tip
Thread: 510


Features:
Smooth bottom and side airflow for medium or high power vaping
Adjustable bottom airflow
Postless deck with bottom honeycomb air holes
Perfect match with Hadron 220 Mod
Compatible with Steam Crave Aromamizer plus decks(sold seperate)

Packages:
1* Aromamizer Ragnar RDTA
1* Replacement 18ml Glass
1* Steam Crave Sticker
1* Chamber Reducer
1* User Manual
1* Allen Key
1* Spare Parts (O-ringsand Grub Screws, Slotted Screws)

----------------
Box Mod with Yihi SX490

You may also like:
BOX MODS
Cheap Vape Deals
GIVEAWAYS
IN STOCK VAPE DEVICES
NEW ARRIVAL